Datasheet AA022N1-A2 Datasheet (ALPHA)

Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com 1

Specifications subject to change without notice. 7/00A

20–24 GHz Surface Mount
Low Noise Amplifier

Features

■ Surface Mount Package

■ 3.2 dB Noise Figure

■ 17 dB Gain

■ +8 dBm Output Power

■ Single Voltage Operation

■ 100% RF and DC Testing

AA022N1-A2

Patent Pending

Description

The AA022N1-A2 is a broadband millimeterwave low
noise amplifier in a rugged surface mount package which
is compatible with high-volume solder installation. The
amplifier is designed for use in millimeterwave
communication and sensor systems as the receiver front­end or as a gain stage when high gain and low noise figure
are required. The robust ceramic surface mount package
provides excellent electrical performance and a high
degree of environmental protection for long-term reliability.
A single supply voltage simplifies bias requirements. All
amplifiers are screened at the operating frequencies prior
to shipment for guaranteed performance. Amplifier is
targeted for high-volume millimeterwave applications such
as point-to-point and point-to-multipoint wireless
communications systems.

Parameter Symbol Min. Typ. Max. Unit

Bandwidth BW 20 19–25 24 GHz

Small Signal Gain G1517 dB

Noise Figure NF 3.2 4.0 dB

Input Return Loss RL

I

9dB

Output Return Loss RL

O

12 dB

Output Power at 1 dB Gain Compression P

1 dB

5 8 dBm

Temperature Coefficient of Gain dG/dT -0.016 dB/C

Electrical Specifications at 25°C (VD1= VD2= 5.5 V)

Parameter Symbol Min. Typ. Max. Unit

Drain Current 1 I

D1

15 mA

Drain Current 2 I

D2

23 mA

Total Drain Current ID1+ I

D2

38 50 mA

DC

RF

Pin Out

AA022N1-A2

YYWW

RF In RF Out

Orientation

Indicated by

Missing

Castellations

V

D1

N/CN/C

V

D2

N/CN/C

20–24 GHz Surface Mount Low Noise Amplifier AA022N1-A2

2 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com

Specifications subject to change without notice. 7/00A

Characteristic Value

Operating Temperature (TC) -55°C to +90°C

Storage Temperature (TST) -65°C to +150°C

Bias Voltage (VD1)6 V

DC

Bias Voltage (VD2)6 V

DC

Power In (PIN) 13 dBm

Absolute Maximum Ratings

Frequency (GHz)

Gain vs. Frequency

Gain (dB)

10

0

20

30

1510 20 25 30

-55˚C

+85˚C

+25˚C

Frequency (GHz)

Noise Figure vs. Frequency

NF (dB)

2

3

4

5

6

20 22 24 26

Frequency (GHz)

Return Loss vs. Frequency

Return Loss (dB)

-20

-10

0

10 15 20 25 30

S

11

S

22

Typical Performance Data (VD1= VD2= 5.5 V)

Outline

0.241

(6.12 mm)

0.040

(1.02 mm)

0.016

(0.41 mm)

0.194

(4.93 mm)

0.056

(1.42 mm)

0.204

(5.18 mm)

0.251

(6.38 mm)

2X 0.044

(1.12 mm)

8X 0.020

(0.51 mm)

2X 0.129

(3.28 mm)

C

L

2X 0.064

(1.63 mm)

2X 0.043

(1.09 mm)

2X 0.085

(2.16 mm)

C

L

20–24 GHz Surface Mount Low Noise Amplifier AA022N1-A2

Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com 3

Specifications subject to change without notice. 7/00A

Typical S-Parameters at 25°C (VD1= VD2= 5.5 V)

Frequency

S

11

S

21

S

12

S

22

(GHz) Mag. (dB) Ang. (Deg.) Mag. (dB) Ang. (Deg.) Mag. (dB) Ang. (Deg.) Mag. (dB) Ang. (Deg.)

10 -0.56 -1.1 -2.72 -50.7 -50.86 -63.4 -1.27 3.9

12 -1.79 -76.5 8.10 173.3 -48.03 -151.9 -2.47 -69.3

14 -2.03 -136.4 14.35 31.2 -47.13 151.9 -8.04 -129.0

15 -1.81 -165.0 15.32 -31.7 -45.79 126.3 -9.46 -135.3

16 -1.44 164.4 16.45 -84.4 -46.50 89.4 -9.05 -146.3

17 -0.72 128.8 18.50 -139.2 -45.38 81.2 -8.72 -163.2

18 -0.74 78.9 20.09 158.8 -40.88 53.0 -10.21 175.0

19 -2.99 25.1 20.47 96.1 -41.27 9.7 -12.10 160.9

20 -6.55 -26.7 19.62 37.8 -40.87 -17.4 -15.62 153.8

21 -9.49 -69.4 18.28 -12.4 -39.72 -48.6 -18.90 162.7

22 -10.71 -102.9 17.20 -57.1 -39.32 -84.5 -16.61 -173.2

23 -10.57 -128.6 17.08 -98.2 -39.74 -128.7 -13.37 -168.3

24 -9.57 -146.2 17.02 -142.4 -41.04 -165.9 -10.86 -171.3

25 -7.76 -164.5 16.39 172.6 -42.43 170.2 -8.66 178.4

26 -6.01 177.5 15.71 130.4 -44.23 140.4 -6.69 164.4

27 -4.12 158.1 15.33 88.7 -45.22 107.0 -4.81 150.4

28 -2.23 135.6 15.18 50.4 -41.57 61.9 -3.18 132.9

29 -0.65 104.8 14.52 4.6 -45.85 -4.3 -2.32 106.3

30 -0.21 70.3 14.66 -46.6 -46.47 -80.9 -2.48 80.7

31 -1.20 34.3 12.70 -92.7 -51.09 -139.6 -3.28 58.2

32 -3.30 3.0 8.94 -126.0 -48.32 -173.9 -5.07 42.6

33 -5.23 -24.9 7.07 -159.1 -40.72 125.5 -5.92 26.0

34 -6.55 -54.0 7.01 166.9 -40.49 67.0 -7.23 4.3

35 -7.53 -84.9 5.48 126.0 -42.59 24.4 -9.05 -16.6

36 -8.46 -111.5 2.71 84.8 -43.63 5.7 -10.89 -38.5

37 -8.24 -137.5 0.94 56.1 -45.24 -72.5 -12.96 -65.5

38 -8.38 -161.5 0.42 30.6 -47.57 -26.9 -15.35 -94.6

39 -7.46 179.2 0.16 3.2 -43.38 -53.6 -14.60 -126.0

40 -6.45 163.3 -0.81 -31.6 -44.44 -73.7 -12.43 -151.1

20–24 GHz Surface Mount Low Noise Amplifier AA022N1-A2

4 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com

Specifications subject to change without notice. 7/00A

“Alpha Two” Surface Mount Package
Handling and Mounting

Millimeterwave components require careful mounting
design to maintain optimal performance. The Alpha Two
surface mount package (patent pending) provides a
rugged and repeatable electrical connection using
standard solder techniques.

Handling

The Alpha Two surface mount package is very rugged.
However, due to ceramic’s brittle nature, one should
exercise care when handling with metal tools. Do not apply
heavy pressure to the lid. Vacuum tools may be used to
pick and place this part.

Only personnel trained in both ESD precautions and
handling precautions should be allowed to handle these
packages.

Package Construction

The Alpha Two surface mount package consists of a base
and a lid. The package base is ceramic with filled vias and
plated castellations.The package lid is unplated alumina.
The lid seal is epoxy.

Mounting Design

The Alpha Two surface mount package is installed on top
of a printed circuit board on a specially designed footprint.

Mounting footprint geometry will be supplied by Alpha
Industries in electronic formats or paper drawing.

Mounting the Package

The Alpha Two surface mount package is compatible with
high-volume surface mount installation using solder. RF
and DC connections are accomplished with metallized
edge castellations that hold solder fillets. Ground
connections are accomplished by both metallized edge
castellations and filled vias to the bottom of the package.
Care should be taken to ensure that there are no voids
or gaps in the solder so that a good RF, DC, and ground
contact is maintained.

Alpha Two Surface Mount Package Installation

Printed Ccircuit Board

Rogers 4003

0.008" (0.20 mm) Thick

Electrically & Thermally

Conductive Ground Plane

RF In

RF Out

DC Lines

Solder Fillets

Footprint Geometry for Alpha Two

Surface Mount Package

RF In RF Out

DC Connections

DC Connections

64 Via Holes