Page 1
INTEGRATED CIRCUITS
74LVTH244A
3.3V Octal buffer/line driver (3-State)
Propduct specification
IC23 Data Handbook
1998 Oct 02
Page 2
Philips Semiconductors Product specification
74L VTH244A3.3V Octal buffer/line driver (3-State)
FEA TURES
•Octal bus interface
•3-State buffers
•Output capability: +64mA/-32mA
•TTL input and output switching levels
•Input and output interface capability to systems at 5V supply
•Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
•Power-up 3-State
•Live insertion/extraction permitted
•No bus current loading when output is tied to 5V bus
•Latch-up protection exceeds 500mA per JEDEC Std 17
•ESD protection exceeds 2000V per MIL STD 883 Method 3015
and 200V per Machine Model
QUICK REFERENCE DATA
SYMBOL PARAMETER
C
t
PLH
t
PHL
C
OUT
I
CCZ
IN
Propagation delay
nAx to nYx
Input capacitance VI = 0V or 3.0V 4 pF
Output capacitance Outputs disabled; VO = 0V or 3.0V 8 pF
Total supply current Outputs disabled; VCC = 3.6V 0.13 mA
CL = 50pF;
VCC = 3.3V
DESCRIPTION
The LVTH244A is a high-performance BiCMOS product designed for
V
operation at 3.3V .
CC
This device is an octal buffer that is ideal for driving bus lines. The
device features two Output Enables (OE
four of the 3-State outputs.
CONDITIONS
T
= 25°C; GND = 0V
amb
1, OE2), each controlling
TYPICAL UNIT
1.9
2.0
ns
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER
20-Pin Plastic SOL –40°C to +85°C 74LVTH244A D 74LVTH244A D SOT163-1
20-Pin Plastic SSOP Type II –40°C to +85°C 74LVTH244A DB 74LVTH244A DB SOT339-1
20-Pin Plastic TSSOP Type I –40°C to +85°C 74LVTH244A PW 7LVTH244APW DH SOT360-1
PIN CONFIGURATION
1
1OE
2
1A0
3
2Y3
4
1A1
5
2Y2
6
1A2
7
2Y1
8
1A3
9
2Y0 1Y3
10 11
GND
20
V
CC
2OE
19
1Y0
18
2A3
17
1Y1
16
2A2
15
1Y2
14
2A1
13
12
2A0
SV00010
PIN DESCRIPTION
PIN NUMBER SYMBOL NAME AND FUNCTION
2, 4, 6, 8 1A0 – 1A3 Data inputs
11. 13, 15, 17 2A0 – 2A3 Data inputs
18, 16, 14, 12 1Y0 – 1Y3 Data outputs
9, 7, 5, 3 2Y0 – 2Y3 Data outputs
1, 19 1OE, 2OE Output enables
10 GND Ground (0V)
20 V
CC
Positive supply voltage
1998 Oct 02 853-2130 20128
2
Page 3
Philips Semiconductors Product specification
I
DC out ut current
mA
74LVTH244A3.3V Octal buffer/line driver (3-State)
LOGIC SYMBOL
1A0
2
1A1
4
1A2
6
1A3
8
1OE
1
2A0
11
2A1
13
2A2
15
2A3
17
2OE
19
1Y0
1Y1
1Y2
1Y3
2Y0
2Y1
2Y2
2Y3
FUNCTION TABLE
INPUTS OUTPUTS
nOE1 nAx nYx
L L L
L H H
H X Z
H =High voltage level
L =Low voltage level
X = Don’t care
Z =High impedance ”off” state
LOGIC SYMBOL (IEEE/IEC)
18
16
14
12
9
7
5
3
SV00011
1
EN
2
4
6
8
19
EN
11 9
13 7
15 5
17 3
18
16
14
12
SV00012
ABSOLUTE MAXIMUM RA TINGS
SYMBOL
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Oct 02
1, 2
PARAMETER CONDITIONS RATING UNIT
V
V
CC
V
OUT
OUT
I
IK
I
OK
T
stg
DC supply voltage –0.5 to +4.6 V
DC input voltage
I
DC output voltage
p
3
3
Output in Off or High state –0.5 to +7.0 V
–0.5 to +7.0 V
Output in Low state 128
Output in High state –64
DC input diode current VI < 0 –50 mA
DC output diode current VO < 0 –50 mA
Storage temperature range –65 to 150 °C
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability .
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3
Page 4
Philips Semiconductors Product specification
SYMBOL
PARAMETER
UNIT
I
mA
IIIn ut leakage current
4
µA
Data Pins
4
6
74LVTH244A3.3V Octal buffer/line driver (3-State)
RECOMMENDED OPERATING CONDITIONS
LIMITS
MIN MAX
V
CC
V
V
V
I
OH
OL
∆t/∆v Input transition rise or fall rate; outputs enabled 10 ns/V
T
amb
DC ELECTRICAL CHARACTERISTICS
SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT
V
IK
V
OH
V
OL
I
OFF
I
HOLD
I
EX
I
PU/PD
I
OZH
I
OZL
I
CCH
I
CCL
I
CCZ
∆I
CC
NOTES:
1. All typical values are at T
2. This is the increase in supply current for each input at the specified voltage level other than V
3. This parameter is valid for any V
transition time of 100µsec is permitted. This parameter is valid for T
4. Unused pins at V
5. I
CCZ
6. This is the bus hold overdrive current required to force the input to the opposite logic state.
DC supply voltage 2.7 3.6 V
Input voltage 0 5.5 V
I
High-level input voltage 2.0 V
IH
Low-level input voltage 0.8 V
IL
High-level output current –32 mA
Low-level output current 32
Low-level output current; current duty cycle ≤ 50%, f ≥ 1kHz 64
Operating free-air temperature range –40 +85 °C
LIMITS
MIN TYP1MAX
Input clamp voltage VCC = 2.7V; IIK = –18mA –0.9 –1.2 V
VCC = 2.7 to 3.6V; IOH = –100µA VCC-0.2 VCC-0.1
High-level output voltage VCC = 2.7V; IOH = –8mA 2.4 2.5 V
VCC = 3.0V; IOH = –32mA 2.0 2.2
VCC = 2.7V; IOL = 100µA 0.1 0.2
VCC = 2.7V; IOL = 24mA 0.3 0.5
Low-level output voltage VCC = 3.0V; IOL = 16mA 0.25 0.4 V
VCC = 3.0V; IOL = 32mA 0.3 0.5
VCC = 3.0V; IOL = 64mA 0.4 0.55
VCC = 0 or 3.6V; VI = 5.5V 0.1 10
p
VCC = 3.6V; VI = VCC or GND Control pins ±0.1 ±1
VCC = 3.6V; VI = V
VCC = 3.6V; VI = 0
CC
0.1 1
–1 -5
Output off current VCC = 0V; VI or VO = 0 to 4.5V 1 ±100 µA
VCC = 3V; VI = 0.8V 75 130
Bus Hold current A inputs
VCC = 3V; VI = 2.0V –75 –140
VCC = 0V to 3.6V; VCC = 3.6V ±500
Current into an output in the
High state when VO > V
Power up/down 3-State
output current
3
CC
3-State output high current VCC = 3.6V; VO = 3V; VI = VIL or V
3-State output low current VCC = 3.6V; VO = 0.5V; VI = VIL or V
Quiescent supply current VCC = 3.6V; Outputs Low, VI = GND or V
Additional supply current per
input pin
is measured with outputs pulled to VCC or GND.
2
or GND.
CC
amb
= 25°C.
CC
VO = 5.5V; VCC = 3.0V 60 125 µA
VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC;
OE/OE = Don’t care
IH
IH
VCC = 3.6V; Outputs High, VI = GND or V
VCC = 3.6V; Outputs Disabled; VI = GND or V
I
0 0.13 0.19
CC,
O =
I
0 2 5 mA
CC,
O =
CC,
5
I
= 0
O
VCC = 3V to 3.6V; One input at VCC-0.6V,
Other inputs at VCC or GND
or GND
between 0V and 1.2V with a transition time of up to 10msec. From V
= 25°C only.
amb
CC
= 1.2V to VCC = 3.3V ± 0.3V a
CC
±1 ±100 µA
1 5 µA
–1 –5 µA
0.13 0.19
0.1 0.2 mA
µA
1998 Oct 02
4
Page 5
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; T
SYMBOL PARAMETER WAVEFORM VCC = 3.3V ±0.3V VCC = 2.7V UNIT
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
Propagation delay
nAx to nYx
Output enable time
to High and Low level
Output disable time
from High and Low level
NOTE:
1. All typical values are at V
= 3.3V and T
CC
amb
AC WAVEFORMS
VM = 1.5V, VIN = GND to 2.7V
= –40°C to +85°C.
amb
= 25°C.
LIMITS
1.9
2.0
2.8
2.3
2.9
2.5
1
MAX MAX
3.5
3.3
4.5
4.4
4.4
4.4
3.8
3.6
5.3
4.9
4.5
4.4
ns
ns
ns
MIN TYP
1
2
2
1.1
1.3
1.1
1.4
1.9
1.8
3.0V or V
whichever
nAx INPUT
nYx
OUTPUT
V
M
t
PLH
V
M
V
M
t
PHL
is less
0V
V
OH
V
M
V
OL
SA00016
Waveform 1. Input (nAx) to Output (nYx) Propagation Delays
2.7V
CC
OE INPUT
Yn OUTPUT
Yn OUTPUT
1.5V
t
PZL
t
PZH
1.5V
1.5V
1.5V
t
PLZ
t
PHZ
0V
3.0V
+ 0.3V
V
OL
V
OL
V
OH
V
OH
0V
SV00103
– 0.3V
Waveform 2. 3-State Output Enable and Disable Times
1998 Oct 02
5
Page 6
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
TEST CIRCUIT AND WAVEFORMS
V
CC
PULSE
GENERATOR
V
IN
D.U.T.
R
T
V
OUT
R
L
C
L
R
L
Test Circuit for 3-State Outputs
SWITCH POSITION
TEST SWITCH
t
PLH/tPHL
t
PLZ/tPZL
t
PHZ/tPZH
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value.
= Load capacitance includes jig and probe capacitance;
C
L
see AC CHARACTERISTICS for value.
= Termination resistance should be equal to Z
R
T
pulse generators.
Open
6V
GND
OUT
of
6.0V
GND
Open
NEGATIVE
PULSE
POSITIVE
PULSE
FAMILY
74LVT
t
90%
10%
V
M
10% 10%
t
THL
t
TLH
90% 90%
V
M
W
(tF)
(tR)t
t
W
VM = 1.5V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
Amplitude Rep. Rate t
2.7V
10MHz
V
M
V
W
500ns
M
AMP (V)
90%
0V
(tR)
t
TLH
(tF)
THL
AMP (V)
10%
0V
t
t
R
F
2.5ns 2.5ns
SV00092
1998 Oct 02
6
Page 7
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1
1998 Oct 02
7
Page 8
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1
1998 Oct 02
8
Page 9
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1
1998 Oct 02
9
Page 10
Philips Semiconductors Product specification
74LVTH244A3.3V Octal buffer/line driver (3-State)
Data sheet status
Data sheet
status
Objective
specification
Preliminary
specification
Product
specification
Product
status
Development
Qualification
Production
Definition
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1]
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury . Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
print code Date of release: 05-96
Document order number: 9397-750-04618
yyyy mmm dd
10
Loading...