Page 1
G
Toggle
7000 Series
Miniature Toggle Switches
Features/Benefits
• Multi-pole and multi-position
ide variety of actuator and
• W
termination options
Typical Applications
elecommunications
• T
• Instrumentation
• Medical equipment
• Epoxy terminal-seal compatible
with bottom wash cleaning
• RoHS complaint models available
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page G-16 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ω min.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G–4 thru G–16. For additional options not shown in catalog, consult our Customer Service Center.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
For materials see page G-4.
NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7305 3P Mom.-Off-Mom.
7308 3P On-None-Mom.
7401 4P On-None-On
7403 4P On-Off-On
7405 4P Mom.-Off-Mom.
7408 4P On-None-Mom.
7411 4P On-On-On
7413 4P On-On-Mom.
7415 4P Mom.-On-Mom.
Note: UL/CSA models available,
see pages G-4 & G-5.
Actuator
M .200" high
P3 Flatted, anti-rotation,
.450" high
S .420" high
T .687" high, 15/32 bushing
K2 Locking lever, .704" high
K9 Locking lever, .704" high
K12 Locking lever, .732" high
K19 Locking lever, .732" high
L .840" high
L1 .640" high
L1P Anti-rota
L2 .550" high
L2P Anti-rota
L3 Plastic .940”
L40 Lever handle without ca
L41 .531" high lever handle with cap
L42 .838" high lever handle with cap
MP Anti-rotation, .200" high
P1 Flatted, anti-rotation,
.840" high
P4 Flatted, anti-rotation,
.250" high
SP Anti-rotation, .420" high
T1 .487" high,
T1P Anti-rotation, .487" high,
15/32 bushing
T2P Flatted, anti-rotation,
.610” high, 15/32 bushing,
TP Anti-rota
15/32 bushing
.640" high
tion,
.550" high
tion,
inch
15/32 bushing
.687" high,
tion,
p
Bushing
D .280 high, keyway
H .296 high, flat
Y .350 high, keyway
NONE No bushing
choice required
CW Splashproof
D8 .280" high, flat
D9 .280" high, keyway
H3 .315" high, keyway
H4 8mm high, keyway
Y1 .378" high, keyway
Y3 8.9mm high, keyway
Y4 .378" high,
Y9 .350" high, keyway
erminations
T
A Right angle,
AV2 Vert. right angle, PC thru-hole
C PC Thru-hole
V3 .460 high,V-bracket
Z Solder lug
A2 Right angle,
A3 Right angle, PC thru-hole
A4 Right angle,
AW1 Right angle, extended, PC thru-hole
AW4Right angle,
V2 .555" high, V-bracket
V4 .630" high, V-bracket
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high,
V9 1.150" high, V-bracket
V21 .555" high, snap-in V-bracket
V31 .460" high, snap-in V-bracket
V41 .630" high,
V71 .630" high, snap-in V-bracket
V81 .953" high, snap-in V-bracket
t
fla
PC thru-hole
PC thru-hole
PC thru-hole
extended, PC thru-hole
-bracket
V
-bracket
V
p-in
sna
W .750" long, wire wrap
W1 .964" long, wire wrap
W3 .425" long,
W4 1.062" long, wire wrap
W5 1.305" long, wire wrap
Z3 Quick connect
Contact Material
B Gold
P Gold, matte-tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Actuator Color/Finish
NONE Bright chrome
2 Black
3 Red
S Satin chrome
KXX Actuator Color/Finish
NONE Na
2 Black anodized aluminum
3 Red anodized aluminum
7 Blue anodized aluminum
Seal
E Epoxy
I Epoxy potted
base
tural aluminum
Bushing Finish
NONE Nickel on all
2 Black
p
wire wra
bushings (except D8,
satin chrome)
G–3
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 2
G
Toggle
7000 Series
1/4-40 UNS-2A
KEYWAY
1/4-40 UNS-2A
KEYWAY
Miniature Toggle Switches
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page G-15 for additional contact materials.
SWITCH FUNCTION
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See above for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Materials listed above ar
on specific and custom switches, consult Customer Service Center.
e for switches with standard options. For information
NO.
POLES
MODEL NO.
7101
7103
7105
SP
7107
7108
7109
SPDT
Part number shown: 7101SYZBE
7201
7203
7205
7207
DP
7208
7211 *
*
7213
7215*
UL/CSA**
MODEL
NO.
U11
U13
U15
U17
U18
U19
U21
U23
U25
U27
U28
U211*
U213
U215*
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
NONE
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
ON ON ON
*
ON
MOM. ON MOM.
ON MOM.
ON
MOM.
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
2-3
2-3
2-3
N/A
2-3,5-6
2-3,5-6
2-3,5-6
2-3,5-6
N/A
OPEN
N/A
2-3
Terminal Numbers
For Reference Only
N/A
OPEN
N/A
2-3,5-4
2-1
2-1
2-1
2-1
2-1,5-4
2-1,5-4
2-1,5-4
2-1,5-4
SPDT
DPDT
SCHEMA
TIC
DPDT
Part number shown: 7201SYZQE
MOM. = Momentary
* Wiring for 3-way switch, see Section O.
erminal Numbers
T
For Reference Only
** U11–U415 model nos. with all options when ordered with G, L, R, M, Q or S contact material.
Specifications and dimensions subject to change
G–4
www.ck-components.com
Dimensions are shown: Inch (mm)
Page 3
G
Toggle
SWITCH FUNCTION
4PDT
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
N/A
OPEN
N/A
2-3,5-4,8-9,11-10
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
ON NONEON
ON OFF ON
MOM. OFF MOM.
ON NONE MOM.
ON
ON ON
ON ON MOM.
MOM.ONMOM.
U41
U43
U45
U48
U411*
U413*
U415*
7401
7403
7405
7408
7411*
7413*
7415*
4P
3PDT
2-1,5-4,8-7
2-1,5-4,8-7
2-1,5-4,8-7
N/A
OPE
N
N/A
2-3,5-6,8-9
2-3,5-6,8-9
2-3,5-6,8-9
ON NONEON
ON OFF ON
MOM
. OFF MOM.
ON OFF MOM.
ON NONE MOM.
U31
U33
U35
U37
U38
7301
7303
7305
7307
7308
3P
SCHEMATIC
CONNECTED TERMINALS
POS. 1POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
UL/CSA**
MODEL
NO.
MODEL NO.
NO.
POLES
4PDT
3PD
T
Part number shown: 7301SYZQE
Part number shown: 7401SYZQE
MOM. = Momentary
* Wiring for 3-way switch, see Section O.
** U11–U415 model nos.with all options when ordered with G, L, M, Q, R or S contact material.
1/4-40 UNS-2A
KEYWAY
1/4-40 UNS-2A
KEYWAY
7000 Series
Miniature Toggle Switches
Terminal Numbers
For Reference Only
erminal Numbers
T
For Reference Only
Specifications and dimensions subject to change
G–5
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 4
G
Toggle
7000 Series
*DIM. ‘A’
*
*
*
*
*
15/32-32 UNS-2A
.475
(12,07)
.448
(11,38)
15/32-32 UNS-2A
15/32-32 UNS-2A
.687
(17,45)
Miniature Toggle Switches
ACTUATOR
S .420" HIGH
SP ANTIROTATION, .420" HIGH
1
2,3
M .200" HIGH
MP ANTIROTATION, .200" HIGH
ACTUATOR FINISH
TOR
ACTUA
1
2,3
L, L1, L2 .840", .640", .550" HIGH
L1P, L2P ANTIROTATION,
.840", .640", .550" HIGH
1
2,3
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
Caps ar
e available separately, see page G-16.
P1 FLATTED WITH ANTIROTATION, .840" HIGH
Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
T .675 (17,15) HIGH
TP ANTIROTATION, .675 (17,15) HIGH,
15/32 BUSHING
1,2
1,2,3
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
Caps ar
e available separately, see page G-16.
2,3
P3 FLATTED WITH ANTIROTATION,
.450" HIGH
2,3
T1 .475 (12,07) HIGH
T1P ANTIROTATION, .475 (12,07) HIGH,
15/32 BUSHING
OPTION
CODE
L
L1, L1P
L2, L2P .550 (13,97)
Caps ar
e available separately, see page G-16.
P4 FLATTED WITH ANTIROTATION, .250" HIGH
1,2
1,2,3
T2P FLATTED, ANTIROTATION, .610" HIGH,
15/32 BUSHING
1,2,3
DIM ‘A’
.840 (21,34)
.640 (16,26)
2,3
Bushing option code not r
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A4, AW1-AW4 terminations.
1
L, L1, L2, M, S & TXX actuators not available
with Y1 bushing.
2
L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not
available with D8 & H4 bushing.
3
Antirotation: Provides anti-‘push-in’ feature on
actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
ed unless CW splashpr
equir
ed. TP & T1P
oof bushing or
OPTION
CODE
der
ACTUATOR FINISH
NONE BRIGHT CHROME-With Nickel Plated Bushing
2 BLACK
S SATIN CHROME
G–6
ed. T2P actuator not available
Bushing option code not r
with CW splashproof bushing or single pole models with
A-A4, AW1-AW4 terminations.
NOTE: Black hardware is supplied when either
black actuators or bushings ar
additional hardware, see Section O.
equir
e specified. For
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Page 5
G
Toggle
ACTUATOR
Replaces K1, K18
Replaces K, K8
*
Gloss Plastic
Chrome Finish
No color choice required.
Locking Positions
–03 & –11 Models
3 Position lock
–05, –09 & –15 Models
1 Position lock
–07 & –13 Models
2 Position lock
–01 Models
2 Position lock
–08 Models
1 Position lock
ACTUA
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH/COLOR
TOR
K2 LOCKING LEVER, .704" HIGH
(threaded)
K9 LOCKING LEVER, .704" HIGH
(unthreaded)
K12 LOCKING LEVER, .732" HIGH
K19 LOCKING LEVER, .732" HIGH
(threaded)
(unthreaded)
OPTION
CODE
ACTUATOR CAP FINISH
NONE NATURAL ALUMINUM–With Nickle Plated Bushing
2 BLACK ANODIZED ALUMINUM
3 RED ANODIZED ALUMINUM
7 BLUE ANODIZED ALUMINUM
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
Locking levers supplied with bushing shown.
Bushing option code not required unless CW splashproof
bushing ordered.
L40 LEVER HANDLE WITHOUT CAP L41 PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
L3 PLASTIC .940” HIGH
OPTION
CODE
NONE No Actuator Color (L40 option)
2 BLACK
3 RED
L42 PLASTIC LEVER HANDLE WITH
Finish: Matte (L41 & L42).
PLASTIC ACTUATOR
COLORS
ANTIROTATION AND CAP, P/N 4811
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
or
available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.
der L40 actuator option and lever handles separately, see page G-16. L4X actuators not
Specifications and dimensions subject to change
G–7
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 6
G
Toggle
7000 Series
PANEL MOUNTING
1/4 INCH BUSHING METRIC BUSHING
15/32 INCH BUSHING
Without locking ring. With standard locking ring. With small locking ring. Without locking ring. With locking ring. Without locking ring. With standard locking ring.
15/32-32 UNS-2A
1/4-40 UNS-2A
For T & T1 actuators. For actuators other than T & T1.
1/4-40 UNS-2A
D8
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
Miniature Toggle Switches
BUSHING
Y .350" HIGH,
THREADED, KEYWAY
Y9 .350" HIGH,
UNTHREADED,
KEYWAY
NONE NO BUSHING
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
D .280" HIGH,
D8 .280" HIGH, UNTHREADED,
D9 .280" HIGH, UNTHREADED,
THREADED, KEYWAY
3
FLAT
KEYWAY
BUSHING
H .296" HIGH, FLAT
BUSHING FINISH
THREADED, HIGH TORQUE
H3 .315" HIGH, KEYWAY
1,2
THREADED, HIGH
TORQUE
1,2
Y bushing standard with C,
W-W5, Z or Z3 terminations.
H4 8mm HIGH, KEYWAY, THREADED,
METRIC HIGH TORQUE
1,2,3
CW THREADED, SPLASHPROOF
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
Internal actuator seal standard. External bushing seal
washer available separately
Englewood, N. J.
Part Number: 60225
, or
der fr
om: APM Hexseal
Y1 .378" HIGH, KEYWAY, THREADED,
1,2
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
HIGH TORQUE
IP67 Degree of protection, totally protected
against dust, full-scale voltage pr
temporary immersion. Internal actuator seal
and external bushing seal washer standard.
1,2,4
otection,
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
Y3 8.9mm HIGH, KEYWAY,
THREADED, METRIC
OPTION
CODE
NONE
Y4 .378" HIGH, FLAT, THREADED,
HIGH TORQUE
BUSHING FINISH
NICKEL on all bushings
except ‘D8’ satin chrome.
1,2,5
2 BLACK
1
Will withstand 12 in.-lbs. of torque with no distortion.
2
CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4 terminations.
3
D8 & H4 bushings available only with L, L1, L2, M & S actuators.
4
Y1 bushing available only with LXP, MP, PX & SP actuators.
5
Y4 bushing not available with L4X actuators.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
eaded bushings. Black hardware is supplied when either black bushings or
thr
actuators are specified. Optional mounting nut and locking ring styles and finishes
available, see Section O.
G–8
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Page 7
G
Toggle
Miniature Toggle Switches
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Terminal Nos.
For Reference Only
Actuator Shown
In Pos. 1
SECTION A-A
Dim 'A'
PC MOUNTING
PC MOUNTING
Dim 'A'
.030 (0,76) Thk.
.030 (0,76) Thk.
.030 (0,76) Thk.
TERMINATIONS
Z SOLDER LUG C PC THRU-HOLE
7000 Series
SPDT thru 4PDT
Z3 QUICK CONNECT
SPDT thru 4PDT SPDT thru 4PDT
Not available with P, R or S contact materials.
Not available with P, R or S contact materials.
Mating quick connector available, order part
number 530100000, page G-16.
SPDT thru 4PDT
W, W1, W3, W4, W5 WIRE WRAP
A RIGHT ANGLE, PC THRU-HOLE
OPTION
CODE
DIM ‘A’
W .750 (19,05)
W1 .964 (24,48)
W3 .425 (10,80)
W4 1.062 (26,97)
W5 1.305 (33,15)
7101MD9ABE
Horizontal Actuation
SPDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Part No. Shown: 7101MHABE
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
OPTION
CODE
A
W1
W4
A
G–9
DIM ‘A
.72 (18,3)
.83 (21,1)
’
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Page 8
G
Toggle
7000 Series
Terminals &
Support
Actuator Shown
In Pos. 1
SECTION A-A
Actuator Shown
In Pos. 1
SECTION A-A
Terminals &
Support
.33 (8,4)
DIM 'A'
PC MOUNTING
.18
(4,6)
.33 TYP.
(8,4)
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
7201MD9ABE
Horizontal Actuation
DPDT
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
A RIGHT ANGLE, PC THRU-HOLE
7301MD9ABE
Horizontal Actuation
3PDT
AW1, AW4 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
OPTION
CODE
AW1 .40 (10,2)
AW4 .50 (12,7)
DIM ‘A
’
W4
A
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
G–10
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 9
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1
Terminals & Support
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
PC MOUNTING
Actuator Shown In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
A2 RIGHT ANGLE, PC THRU-HOLE,
Actuator Shown In Pos. 1
SECTION A-A
G
Toggle
.156" PITCH
7000 Series
Miniature Toggle Switches
TERMINATIONS
7101MHA2BE
Horizontal Actuation
SPDT
Not available with TXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
A4 RIGHT ANGLE, PC THRU-HOLE
.156" PITCH
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,
and I seal. Terminal bend radii and lead-in manufacturing option.
Part No. Shown: 7101MHA2BE
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
7101MD9A4BE
Horizontal Actuation
SPDT
NOTE: The A4 option is available with any contact material and can be UL recognized and
CSA certified. The PC pattern must clear switch support legs.
7101MD9A
Horizontal Actuation
SPDT
V2BE
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
Not available with I seal option.
erminal bend radii and lead-in manufacturing option.
T
.150" PITCH
G–11
7201MD9AV2BE
Vertical Actuation
DPDT
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Page 10
G
Toggle
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
Actuator Shown In Pos. 1 SECTION A-A
7000 Series
PC MOUNTING
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
7301MD9A
ertical Actuation
V
.150" PITCH
V2BE
3PDT
Not available with I seal option.
erminal bend radii and lead-in manufacturing option.
T
AV2 VER
7401MD9AV2BE
Vertical Actuation
TICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
4PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
7101MD9__BE
SPDT
Not available with I seal option.
OPTION
CODE
V2, V21 .555 (14,10)
V6 .460 (11,68)
V7, V71 .630 (16,00)
V8, V81 .953 (24,21)
DIM ‘A’
G–12
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 11
G
Toggle
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
TERMINATIONS
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81 VER
TICAL MOUNT, V-BRACKET, SNAP-IN
7000 Series
Miniature Toggle Switches
Not available with I seal option.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Not available with I seal option.
OPTION
CODE
DIM ‘A’
V2, V21 .555 (14,10)
V6, V61 .460 (11,68)
V7, V71 .630 (16,00)
V8, V81 .953 (24,21)
OPTION
CODE
V2, V21 .555 (14,10)
V7, V71 .630 (16,00)
V8, V81 .953 (24,21)
7201MD9__BE
DPDT
7301MD9__BE
3PDT
DIM ‘A’
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Not available with I seal option.
G–13
OPTION
CODE
DIM ‘A’
V2, V21 .555 (14,10)
V7, V71 .630 (16,00)
V8, V81 .953 (24,21)
Specifications and dimensions subject to change
7401MD9__BE
4PDT
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 12
G
Toggle
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
7000 Series
Dim ‘A’
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
Miniature Toggle Switches
TERMINATIONS
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
7101MD9__BE
SPDT
Not available with I seal option.
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Not available with I seal option.
OPTION
CODE
DIM ‘A’
V3, V31 .460 (11,68)
V4, V41 .630 (16,00)
V9 1.150 (29,21)
7201MD9__BE
DPDT
OPTION
CODE
V3, V31 .460 (11,68)
V4, V41 .630 (16,00)
V9 1.150 (29,21)
DIM ‘A’
V4, V9 VERTICAL MOUNT, V-BRACKET
V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Not available with I seal option.
G–14
7301MD9__BE
3PDT
OPTION
CODE
V4, V41 .630 (16,00)
V9 1.150 (29,21)
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
DIM ‘A
’
Page 13
G
Toggle
TERMINATIONS
Dim 'A'
Actuator Shown In Pos. 1
Snap-In
PC MOUNTING
V4, V9 VERTICAL MOUNT, V-BRACKET
V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
7000 Series
Miniature Toggle Switches
7401MD9__BE
4PDT
Not available with I seal option.
CONTACT MATERIAL
OPTION
CODE
B
P
Q
S
G
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONT
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONT
6
TERMINALS: Copper alloy
ACTS & ALL TERMINALS: Copper alloy
ACT & ALL TERMINALS: Copper alloy
CONTACT
MATERIAL
1
GOLD
4,5
SILVER
GOLD OVER
2,3
SILVER
, with matte tin alloy nickel plate.
TERMINAL
PLATING RATINGS
GOLD
MATTE-TIN
SILVER
MATTE-TIN
MATTE-TIN
, with gold plate
, silver plated.
GOLD
1
6
5
6
3
6
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR
0.4 VA MAX. @ 20 V AC OR DC MAX.
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC
POWER
NOTE: Any models supplied with P
U11-U415 model numbers with all options when ordered with G, L,
S, R, M or Q contact material.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
P, S & R contact materials not available with Z & Z3 terminations.
K, L and M options represent Non RoHS tin lead product and are not recommended for new
designs. For additional information please contact Customer Service.
OR 28 V DC; 2 AMPS @ 250 V AC.
OPTION
CODE
DIM ‘A’
V4, V41 .630 (16,00)
V9 1.150 (29,21)
, S, R, Q, B or G contact material ar
e RoHS compliant.
G–15
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
Page 14
G
Toggle
.477
(12,12)
.777
(19,74)
7000 Series
.383
(9,73)
.687
(17,45)
.312
(7,92)
Dim. 'A'
Miniature Toggle Switches
SEAL
E EPOXY SEAL I EPOXY POTTED BASE
Compatible with “bottom-wash” PC board cleaning methods. Available with C, W-W5, Z & Z3 terminations only.
AVAILABLE HARDWARE
Cap
PART NO.
896801000 WHITE
896802000 BLACK
896803000 RED
Material: Polyethylene
Finish: Matte
Cap
PART NO.
763701000 WHITE
763702000 BLACK
763703000 RED
Material: Vinyl
Finish: Matte
Cap
PART NO.
706201000 WHITE
706202000 BLACK
706203000 RED
Material: Vinyl
Finish: Matte
NO.
POLES
SP .410 (10,41)
DP .440 (11,18)
3P .505 (12,83)
4P .505 (12,83)
DIM ‘A’
L41 Lever handle
PART NO.
481001000 WHITE
481002263 BLACK
481003000 RED
Material: Nylon
Finish: Matte
L42 Lever handle
PART NO.
481101000 WHITE
481102263 BLACK
481103000 RED
Material: Nylon
Finish: Matte
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
NOTE: Additional nuts, locking rings and lockwashers available
separately, see Section O.
Other colors available, consult Customer Service Center.
G–16
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www.ck-components.com
Loading...