Page 1
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process)
2SC2120
2SC2120
Audio Power Amplifier Appli cati o ns
· High h
· 1 watts amplifier applications.
· Complementary to 2SA950
Maximum Ratings
Collector-base voltage V
Collector-emitter voltage V
Emitter-base voltage V
Collector current IC 800 mA
Base current IB 160 mA
Collector power dissipation PC 600 mW
Junction temperature T
Storage temperature range T
Electrical Characteristics
: h
FE
Characteristics Symbol Rating Unit
FE (1)
= 100~320
(Ta ==== 25°C)
35 V
CBO
30 V
CEO
5 V
EBO
j
stg
(Ta ==== 25°C)
150 °C
-55~150 °C
Unit: mm
JEDEC TO-92
JEITA SC-43
TOSHIBA 2-5F1B
Weight: 0.21 g (typ.)
Characteristics Symbol Test Condition Min Typ. Max Unit
Collector cut-off current I
Emitter cut-off current I
Collector-emitter breakdown voltage V
DC current gain
Collector-emitter saturation voltage V
Base-emitter voltage VBE VCE = 1 V, IC = 10 mA 0.5 ¾ 0.8 V
Transition frequency fT VCE = 5 V, IC = 10 mA ¾ 120 ¾ MHz
Collector output capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz ¾ 13 ¾ pF
Note: h
classification O: 100~200, Y: 160~3200
FE (1)
VCB = 35 V, IE = 0 ¾ ¾ 0.1 mA
CBO
VEB = 5 V, IC = 0 ¾ ¾ 0.1 mA
EBO
(BR) CEOIC
h
FE (1)
(Note)
h
FE (2)
CE (sat)
= 10 mA, IB = 0 30 ¾ ¾ V
V
= 1 V, IC = 100 mA 100 ¾ 320
CE
VCE = 1 V, IC = 700 mA 35 ¾ ¾
IC = 500 mA, IB = 20 mA ¾ ¾ 0.5 V
1
2003-03-24
Page 2
2SC2120
2
2003-03-24
Page 3
2SC2120
A
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
000707EA
3
2003-03-24
Loading...