Datasheet 250 Datasheet (CTS)

查询250B20B501A1CA供应商

®

Commercial
Composition
9mm Diameter
V ariable Resistors

• Miniature 9mm size

• Low cost

• Bushing mount or PC mount

• Dual control

• Detent available

Series 250

Electrical and Mechanical Specifications

Resistance Range

Standard: 500 ohms through 1 megohms.
Special: For non-standard resistance values,

please contact CTS.

Resistance Tolerance

Standard: ±20%
Special: Tighter tolerances available

in most resistance values.

Resistance Taper

Standard: Linear
Special: Available

Power Rating

Single section - 0.05 watts @ 50°C derated to no load

@ 85°C for linear curve.

Dual section - 0.03 watts @ 50°C derated to no load

@ 85°C for linear curve.

Dielectric Strength

Withstands 250 VAC for 1 minute

Insulation Resistance

100 megohms minimum at 250 VDC

Maximum Operating Voltage

50 VAC, 20 VDC

Angle of Rotation

Total Rotation: 280° ± 5°

Rotational Torque

10-100 g-cm

Stop Strength

3kg-cm minimum

Detent

50% detent available in single section units

Pull-Push Strength

5kgf maximum

Rotational Life

Single seciton - 5K cycles
Dual section - 2K cycles

Slide Noise

Less than 100mV (measured by JIS C6443)

Gang Error

Within 3dB at –40 to 0 dB

Insertion Loss

0.1 dB maximum

Technical Data Sheet 1448C

Technical Data Sheet 1250

CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS

250 B or X

DIMENSION:

250Y

DIMENSION:

MM

INCH

MM

INCH

250U

DIMENSION:

MM

INCH

UM250 With Bushing

DIMENSION:

MM

INCH

XMD250RE

DIMENSION:

MM

INCH

YMD250RE

DIMENSION:

MM

INCH

UMD250RE

DIMENSION:

MM

INCH

Ordering Information

250 U 20 F 102 B 1 N A

U – PC FORMED TO REAR
B – 6.5MM HEIGHT, P.C.

(SINGLE SECTION ONLY)

X – 10.0MM HEIGHT, P.C.
Y – 10.0MM HEIGHT, P.C.

COVER EAR IN FRONT
OF TERMINALS

* B – KNURLED 24 TEETH,

F – FLATTED 4.5MM,

**L – KNURLED 40 TEETH,

* NOT AVAILABLE IN

SINGLE SECTION WITH
BUSHING OR DUAL
SECTION

**NOT AVAILABLE IN DUAL

SECTION

“L” SHAFTS LENGTH

*15 – 15MM
**20 – 20MM
**25 – 25MM

30 – 30MM

*NOT AVAILABLE

IN SINGLE
SECTION WITH
BUSHING OR
DUAL SECTION

**NOT AVAILABLE

IN DUAL SECTION

SHAFTS TRIM

4MM DIAMETER

THICKNESS
6MM DIAMETER

6MM DIAMETER

RESISTANCE CODE

EXAMPLES

CODE RESISTANCE

501 500Ω
102 1K
252 2.5K
502 5K
103 10K
253 25K
503 50K
104 100K

RESIST TOL

A – ±10%
B – ±20%
C – ±30%

TAPER

1 – LINEAR
2 – CW 10% AUDIO
3 – CCW 10% AUDIO
4 – CW 15% AUDIO
5 – CCW 15% AUDIO
6 – CW 20% AUDIO
7 – CCW 20% AUDIO
8 – CW 30% AUDIO

9 – CCW 30% AUDIO
A – CW 5% AUDIO
B – CCW 5% AUDIO

*A – DUAL SECTION WITH BUSHING
*B – SINGLE SECTION WITH BUSHING

D – DUAL SECTION

BLANK – SINGLE SECTION

*U STYLE TERMINALS ONLY

DETENT

N– NO

DETENT

* C– CENTER

DETENT

* NOT

AVAILABLE
IN DUAL
SECTION

WITHOUT BUSHING

Order From:

CTS CORPORATION, ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart, Indiana 46514
North America Toll Free [phone] / [phone] / FAX: [phone] http://www.ctscorp.com

CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road (Chung Liu Road) / P.O. Box 26-20
Kaohsiung Export Processing Zone / Kaohsiung, Taiwan, Rep. of China
[phone] / FAX: [phone].8110040 5m-4-99I