DataCard SD260LTM, SD360TM, SD460 Quick Install Manual
SD260LTM/SD360TM/SD460TM
Card Printers
For Printers Using the Datacard
XPS Card Printer Driver
USB and Network
Installation Instructions
Quick Install Guide
Contents
Step 1: Prepare the Printer ................................................................................. 2
Step 2: Plug In and Power On the Printer ....................................................... 4
Step 3: Set Up the PC .......................................................................................... 5
Step 4: Install the Printer
(USB): Install a USB Printer ............................................................................ 7
(Network): Install a Network Printer .......................................................... 9
Step 5: Install ID Software Printer Plug-In ..................................................... 12
Step 6: Print Sample Card ................................................................................. 13
The printer must be used as installed and recommended by Datacard. You may not modify the printer or
how it is used without written permission. Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Installation Steps
*Supplies sold separately
Warning: This product contains chemicals, including lead,
known to the State of California to cause cancer, and birth
defects or other reproductive harm. Wash hands after handling.
For more information on this warning, refer to www.datacard.com/
califpropwarning.
3
2
1a
Step 1: Prepare the Printer
1f
1g
1e
1b
1c
1d
If you are setting up an SD460 system, also refer to
the setup instructions shipped in the laminator carton.
Loading...