User's Manual
WR-8826-FX / WR-8826-TFX / WR-6412-FX / WR-6415-FX
WR-320-FX / WR-322S-FX / WR-121S-FX / WR-151S-FX
Antes de utilizar el equipo, lea la sección
“Precauciones de seguridad” de este manual.
Conserve este manual para futuras consultas.
Before operating the device, please read the
“Safety precautions” section of this manual.
Retain this manual for future reference.
CONTENTS
SAFETY PRECAUTIONS
WARRANTY
DECLARATION OF CONFORMITY
INTRODUCTION
CONFIGURATIONS
4 x WR-8826 (625W @ 8 Ohms)
8 x WR-8826 (1150W @ 4 Ohms)
16 x WR-8826 (2100W @ 2 Ohms)
4 x WR-6412 o WR-6415 (1150W @ 4 Ohms)
8 x WR-6412 o WR-6415 (2100W @ 2 Ohms)
16 x WR-6412 o WR-6415 (3700W @ 2 Ohms)
LINE DRAWINGS
SPECIFICATIONS
INSTALLATION
ACCESSORIES
TROUBLESHOOTING
ANNEX : Table for cable selection
3
4
5
6 - 8
9 - 11
12
13
14 - 15
16 - 23
24
25
Manual del Usuario / WR series / User’s Manual
Cajas acústicas pasivas / Passive loudspeaker enclosures
Precauciones de Seguridad
Safety Precautions
El signo de exclamación dentro de un triángulo indica la
existencia de importantes instrucciones de operación y
mantenimiento en la documentación que acompaña al producto.
Conserve y lea todas estas instrucciones.
Siga las advertencias.
El doble cuadrado indica equipo de Clase II. The double square indicates Class II device.
Las especificaciones se encuentran en la etiqueta de la parte
posterior del producto.
No exponga este equipo a la lluvia o humedad sin el protector
de lluvia recomendado. No use este aparato cerca del agua
(piscinas y fuentes, por ejemplo). No exponga el equipo a
salpicaduras sin el protector de lluvia recomendado, ni coloque
sobre él objetos que contengan líquidos, tales como vasos y
botellas.
Equipo IP-56 (IP-54 en los modelos WR-6412) según la norma
IEC 60529: 1989 + M1 @ 1999 con un ángulo horizontal mínimo
de -2º.
Este símbolo indica que el presente producto no puede ser
tratado como residuo doméstico normal, sino que debe
entregarse en el correspondiente punto de recogida de equipos
eléctricos y electrónicos.
Equipo diseñado para funcionar entre -25ºC y 45ºC con una
humedad relativa máxima del 95%.
El cableado exterior conectado al equipo requiere de su
instalación por una persona instruida o el uso de cables flexibles
ya preparados.
The exclamation point inside an equilateral triangle is intended to
alert the users to the presence of important operating and
mainten an ce (servi ci ng ) ins tr uc tions i n the l it er ature
accompanying the product.
Heed all warnings. Follow all instructions.
Keep these instructions.
The specifications can be found on the rear label of the product.
Do not expose this device to rain or moisture without the rain
protector supplied. Do not use this apparatus near water (for
example, swimming pools and fountains). Do not place any
objects containing liquids, such as bottles or glasses, on the top
of the unit. Do not splash liquids on the unit without the rain
protector supplied.
IP-56 equipment (IP-54 for WR-6412 models) according IEC
60529: 1989 + M1 @ 1999. Minimum horizontal angle -2º.
This symbol on the product indicates that this product should
not be treated as household waste. Instead it shall be handed
over to the appicable collection point for the recycling of
electrical and electronic equipment.
Working temperature ranges from -25ºC to 45ºC with a relative
humidity of 95%.
The outer wiring connected to the device requires installation by
an instructed person or the use of a flexible cable already
prepared.
El equipo cuenta con dos conectores de entrada en paralelo
para facilitar la conexión de varias cajas en paralelo.
No emplace altavoces en proximidad a equipos sensibles a
campos magnéticos, tales como monitores de televisión o
material magnético de almacenamiento de datos.
El colgado del equipo sólo debe realizarse utilizando los herrajes
de colgado recomendados y por personal cualificado.
No existen partes ajustables por el usuario en el interior de este
equipo. Cualquier operación de mantenimiento o reparación
debe ser realizada por personal cualificado. Es necesario el
servicio técnico cuando el equipo se haya dañado de alguna
forma, como que haya caído líquido o algún objeto en el interior
del aparato, haya sido expuesto a lluvia o humedad, no funcione
correctamente, haya recibido un golpe o su cable de red esté
dañado.
Limpie con un paño seco. No use limpiadores con disolventes. Clean only with a dry cloth. Do not use any solvent based
Note that the two Speakon input connectors are wired in parallel
to provide easy parallel connection of several enclosures.
Do not place loudspeakers in proximity to devices sensitive to
magnetic fields such as television monitors or data storage
magnetic material.
The appliance should be flown only from the rigging points and
by qualified personnel.
No user serviceable parts inside. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
cleaners.
Manual del Usuario / WR series / User’s Manual
3
GARANTÍA
Todos nuestros productos están garantizados por un periodo de 24
meses desde la fecha de compra.
Las garantías sólo serán válidas si son por un defecto de
fabricación y en ningún caso por un uso incorrecto del producto.
Las reparaciones en garantía pueden ser realizadas,
exclusivamente, por el fabricante o el servicio de asistencia técnica
autorizado.
Otros cargos como portes y seguros, son a cargo del comprador
en todos los casos.
Para solicitar reparación en garantía es imprescindible que el
producto no haya sido previamente manipulado e incluir una
fotocopia de la factura de compra.
WARRANTY
All our products are warrantied against any manufacturing defect
for a period of 2 years from date of purchase.
The warranty excludes damage from incorrect use of the product.
All warranty repairs must be exclusively undertaken by the factory
or any of its authorised service centers.
To claim a warranty repair, do not open or intend to repair the
product.
Return the damaged unit, at shippers risk and freight prepaid, to
the nearest service center with a copy of the purchase invoice.
4
Manual del Usuario / WR series / User’s Manual
DECLARACIÓN DE CONFORMIDAD
DECLARATION OF CONFORMITY
DAS Audio Group, S.L.
C/ Islas Baleares, 24 - 46988 - Pol. Fuente del Jarro - Valencia. España
(Spain).
Declara que
WR-8826-FX / WR-8826-TFX / WR-6412-FX / WR-6415-FX / WR-320-FX / WR-322S-FX /
WR-121S-FX / WR-151S-FX:
Declares that
WR-8826-FX / WR-8826-TFX / WR-6412-FX / WR-6415-FX / WR-320-FX / WR-322S-FX /
WR-121S-FX / WR-151S-FX:
Cumple con los objetivos esenciales de las Directivas:
Abide by essential objectives relating Directives:
l De Baja Tensión / Low Voltage 2014/35/UE
l RoHS 2011/65/UE
l RAEE (WEEE) 2012/19/UE
Y son conformes a las siguientes Normas Armonizadas Europeas:
In accordance with Harmonized European Norms:
l EN 60065:2014.- Audio, video and similar electronic apparatus. Safety
requirements.
l EN 50581:2012.- Technical documentation for the assessment of
electrical and electronic products with respect to the restriction of
hazardous substances.
Manual del Usuario / WR series / User’s Manual
5
INTRODUCTION
The WR FX series is a series of products aimed at the outdoor installation market (Weather Resistant).
Features
WR-8826FX / WR-8826TFX
– 2-way system for outdoor installation
– FX finish (Fiberglass) for direct exposure
– ISO-flex interior coating
– 2 x 6B, 6" loudspeaker,
– 1" annular diaphragm compression driver
– Stainless threaded fixing points for wall mounts
– Version with line transformer is the WR-8826FXT
The WR-8826FX employs twin 6B woofers for low
frequency reproduction. A 1” annular diaphragm
compression driver provides brilliant highs. The birch
plywood cabinet construction offers an ultra-compact
design which is available in black or white. This enclosure
is IP-56 according IEC 60529.
The WR-8826FX has been designed for the outdoor
installation market. The WR “FX” finish protects the
cabinets outdoors thanks to a fiberglass exterior and ISOflex interior protection augmenting their weather resistance
when used in direct exposure situations. Stainless steel
threaded rigging points and optional mounting hardware
are available. Version with 75 W/100 V factory installed
line transformer is available, WR-8826FXT.
WR-8826-FX / WR-8826-TFX
WR-6412FX
– 2-way system for outdoor installation
– FX finish (Fiberglass) for direct exposure
– ISO-flex interior coating
– 1 x 12AV, 12" loudspeaker
– M-75 compression driver with 3" annular diaphragm
– Rotatable 60º x 40º horn design
– Stainless threaded fixing points for wall mounts
The WR-6412FX employs a single 12AV woofer for low
frequency reproduction. An M-75 compression driver with
3" titanium diaphragm attached to a 60º x 40º rotatable
horn provides exceptional high frequency reproduction.
The birch plywood cabinet construction offers an ultracompact design which is available in black or white. This
enclosure is IP-54 according IEC 60529.
The WR-6412FX has been designed for the outdoor
installation market. The WR “FX” finish protects the
cabinets outdoors thanks to a fiberglass exterior and ISOflex interior protection augmenting their weather resistance
when used in direct exposure situations. Stainless steel
threaded rigging points and optional mounting hardware
are available.
WR-6412-FX
6
Manual del Usuario / WR series / User’s Manual
WR-6415-FX
WR-6415FX
– 2-way system for outdoor installation
– FX finish (Fiberglass) for direct exposure
– ISO-flex interior coating
– 1 x 15AV, 15" loudspeaker
– M-75 compression driver with 3" annular diaphragm
– Rotatable 60º x 40º horn design
– Stainless threaded fixing points for wall mounts
The WR-6415FX employs a single 15AV woofer for low
frequency reproduction. An M-75 compression driver with
3 titanium diaphragm attached to a 60º x 40º rotatable
horn provides exceptional high frequency reproduction.
The birch plywood cabinet construction offers an ultracompact design which is available in black or white. This
enclosure is IP-56 according IEC 60529.
The WR-6415FX has been designed for the outdoor
installation market. The WR “FX” finish protects the
cabinets outdoors thanks to a fiberglass exterior and ISOflex interior protection augmenting their weather resistance
when used in direct exposure situations. Stainless steel
threaded rigging points and optional mounting hardware
are available.
WR-320-FX
WR-320FX
– Installation Line Array
– 2 x 10Mi low frequency loudspeakers, 2.5" VCD
– 1 x M-75 compression driver, 3" VCD
– Rigging systems for permanent installation
– Rigging compatible with the WR-322SFX
The WR-320FX has been designed for the outdoor installation market. The birch plywood
cabinet construction offers a compact design which is available in black or white.
The WR “FX” finish protects the cabinets outdoors thanks to a fiberglass exterior and ISOflex interior protection augmenting their weather resistance when used in direct exposure
situations.
Manual del Usuario / WR series / User’s Manual
7
WR-322SFX
– Weather resistant subwoofer system
– Fiberglass exterior finish
– ISO-flex interior coating
– 1600 Wprogram power handling
– 2 x 12P, 12" low frequency loudspeakers,
3" VCD
– For use in bi-amplified systems
WR-322S-FX
The WR-322SFX has been designed for the outdoor installation market. The birch plywood cabinet
construction offers a compact design which is available in black or white.
The WR “FX” finish protects the cabinets outdoors thanks to a fiberglass exterior and ISO-flex interior
protection augmenting their weather resistance when used in direct exposure situations.
– Rigging compatible with the WR-320FX
WR-121SFX
– 12", 12GX, 4" VCD, weather resistant subwoofer system
– Fiberglass exterior finish
– ISO-flex interior coating
– Easy arraying with the WR-6412FX
– Threaded fixing points for mounting accessories
– IP54 rating according IEC 60529
WR-121S-FX
The WR (weather resistant) series expands with a
compact subwoofer designed to provide extended range
for the WR series full-range cabinets. The WR-121SFX
incorporates a single 600 Wrms 12" loudspeaker. The WR-
121SFX offers identical cabinet dimensions as the WR6412FX for easy combination in tight packed arrays.
Threaded rigging points and optional mounting hardware
are available.
WR-151SFX
– 15", 15SX, 4" VCD, weather resistant subwoofer system
– Fiberglass exterior finish
– ISO-flex interior coating
– Easy arraying with the WR-6415FX
– Threaded fixing points for mounting accessories
– IP54 rating according IEC 60529
The WR (weather resistant) series expands with a
compact subwoofer designed to provide extended range
for the WR series full-range cabinets. The WR-151SFX
incorporates a single 600 Wrms 15" loudspeaker. The WR-
151SFX offers identical cabinet dimensions as the WR6415FX for easy combination in tight packed arrays.
Threaded rigging points and optional mounting hardware
are available.
WR-151S-FX
8
Manual del Usuario / WR series / User’s Manual
Loading...