Page 1
» Ultra lightweight Class D
amplifier with SMPS
» User definable 24-bit DSP
with LCD screen
» Presets: Live, Dance,
Vocals, Bass Boost &
Monitor Mode
» Stackable 3-band EQ
» High-Definition wireless
streaming of music in
stereo
» Pole mount socket with
dual angles 0º/10º
» Monitor position
» Rigging points
» Selectable standby func-
tionality
The Vantec 15A is a powered potable system with a
multi-angle enclosure that permits stage monitor
applications as well as a compact P.A. system.
The 1500 Wpeak power of the Class D amplifier provides
extended bandwidth, wide dynamic range and
exceptionally low distortion-features hard to find on other
systems in this market segment.
Digital Finite Impulse Response (FIR) filters are used in
the signal processing of the powered Vantec systems.
User configurable voicing, filter and EQ modes, and gain
control are achieved by way of a rotary-knob interface
and LCD screen on the rear of the cabinet. The Vantec
series allows users to wirelessly stream music from
mobiles devices.
The 15F4 loudspeaker with 3" voice coil provides
accurate low frequency reproduction. High frequencies
are handled by the M-28 FEM optimized compression
driver with 1" exit offering excellent performance.
1500 Wpeak
(Class D Bi-amplified)
Balanced Differential Line
20 kohms
3 V (+12 dBu)
45 Hz - 20 kHz
135 dB
90º x 50º
Birch Plywood
Black Paint
LF: 1 x 15F4 / GM 15F4
HF: 1 x M-28 / GM M-28
INPUT: 2 x Female XLR
LOOP THRU: 1 x Male XLR
AUX: 1 x 3.5 mm (1/8")
AC INPUT: powerCON
115 V, 3 A, 50 Hz/60 Hz
230 V, 1.5 A, 50 Hz/60 Hz
71 x 44.4 x 37.5 cm
28 x 17.5 x 14.8 in
24 kg (52.8 lb)
ANL-2
TRD-2
TRD-6
Power Amplifier
Input Type
Input Impedance
Sensitivity
1
On-axis Frequency Range (-10 dB)
Maximum Peak SPL at 1 meter
HF Horn Coverage Angles (-6 dB)
Enclosure Material
Finish
Transducers/Replacement Parts
Connectors
AC Power Requirements
Dimensions (H x W x D)
Weight
Accessories (optional)
vantec series
Technical Specifications
Dimensions
Powered, compact multipurpose
system
vantec 15A
1. Level control at 0 dB.
Page 2
Frequency Response
Shows the frequency
response at 1 m of a
unit radiating to an
anechoic environment
and driven by a swept
sine wave signal (-13
dBu input). Brown: Live.
Green: Dance. Blue:
Vocals. Orange: Bboost.
Red: Shows the frequency response at 1.7
m of a unit lying on
the floor with monitor
preset selected, average
of 3 different mic positions in the listening
window, referred to 1
m.
10 100 1k 10k 20k10 Hz
120.0
dBSPL
110.0
100.0
90.0
80.0
70.0
vantec 15A
vantec series
Product improvement through research and development
is a continuous process at D.A.S. Audio. All specifications
subject to change without notice.
6
-oo
0
-oo
0
VANTEC15A
www.dasaudio.com
33
1 2
live off
0 0.0m
O
+0dB
Vantec 15A input and
control panel
NOTES. Frequency response: referred to 1 m; low end obtained through the use of near field techniques;
one-third octave smoothed for correlation with human hearing.
Loading...