D.A.S. AXA-ACW User Manual

AXA-ACW
El soporte AXA-ACW ha sido diseñado para formar arrays de arco 4 y arco 24. Instalación array horizontal en pared: máximo de 3 cajas, con el AXU en la del centro. Instalación array vertical en pared: máximo de 3 cajas, con el AXU abajo. En techo: máximo de 6 cajas.
Montaje de soporte
1.- Fijar el AXU en techo o pared.
2.- Posicionar la arco 4/24 entre los brazos del soporte AXU y 2 soportes AXA-ACW en el exterior de ambos. Atornillar con tornillo allen y grower.
3.- Colocar la siguiente caja con un nuevo AXA-ACW a cada lado, en el hueco entre los anteriores. El AXA- ACW permite angular de 0º a 42º en pasos de 6º.
4.- Atornillar la siguiente caja entre los 2 AXA-ACW anteriores y con 2 nuevos, esta vez, en el exterior del conjunto.
5.- Repetir las operaciones 3 y 4.
En el caso de colgar un numero par de cajas, se incluyen arandelas planas para suplementar la distancia entre el ultimo AXA-ACW y la caja. Es recomendable dos personas para el montaje del soporte AXA-ACW.
Contenido
8x Tornillos M6x12 DIN 6912 Zn 8x Arandelas M6 DIN 7980 Zn (grower) 8x Arandelas M6 DIN 9021 Zn (carrocero) 1x Llave Allen nº 5
The AXA-ACW bracket has been designed to set up arco arrays. Horizontal wall mounting array: maximum of 3 boxes, attachment to the center box. Vertical wall mounting array: maximum of 3 boxes, attachment to the bottom box. Ceiling mounting: maximum 6 boxes.
Mounting instructions
1. Attach the AXU to the wall or ceiling.
2. Position the arco 4/24 between the support arms of the AXU. Place the AXA-ACW supports on the outside of the AXU on each side of the box (as shown). Insert allen screw and lockwashers.
3. Place second box with a set of AXA-ACW supports as shown.
4. Screw boxes, selecting the angles provided between 0º and 42º in 6ºsteps.
5. Repeat points 3. and 4. to add more boxes.
Note: if an even number of boxes (2, 4 or 6) are assembled in the array, use the wide washer (incl.) to supplement the distance between the last box and the AXA-ACW. Two person installation is recommended.
Contents
8x M6x12 DIN 6912 Zn screws 8x M6 DIN 7980 Zn washer (grower) 8x M6 DIN 9021 Zn washer 1x n.5 Allen wrench
Garantía
Todos nuestros productos están garantizados por un periodo de 24 meses desde la fecha de compra. Las garantías sólo serán válidas si son por un defecto de fabricación y en ningún caso por un uso incorrecto del producto. La reparación en garantía cubre la reposición de las partes defectuosas. Otros cargos como portes y seguros, son a cargo del comprador en todos los casos. Para solicitar reparación en garantía es imprescindible que el producto no haya sido
previamente manipulado e incluir una fotocopia de
la factura de compra.
D.A.S. AUDIO S.A.
C/ Islas Baleares, 24 - 46988 - Fuente del Jarro. Valencia - SPAIN - Tel. 96 134 05 25 - Tel. Intl. +34 96 134 08 60 - Fax +34 96 134 06 07
Warranty
All D.A.S. products are warrantied against any manufacturing defect for a period of 2 years from date of purchase. The warranty excludes damage from incorrect use of the product. All warranty repairs must be exclusively undertaken by the factory or any of its authorized service centers. To claim a warranty repair, do not open or intend to repair the product. Return the damaged unit, at shippers risk and freight prepaid, to the nearest service center with a copy of the purchase invoice.
www.dasaudio.com
HI_AXA-ACW_01
Loading...