DAS ARTEC-322S Datasheet

artec 300 series
ARTEC-322S
» Compact Band-Pass subwoofer system
» 2 x 12” (3” VCD)
» Top grade Birch cabinet
construction ISO-flex polyurea paint
»
Robust steel professional rigging compatible with ARTEC-320
The ARTEC-322S is a band-pass subwoofer system with dual 12P low frequency loudspeakers. The loudspeakers are protected by a perforated steel grille, sealed against corrosion using a powder coat finish. The 15mm birch plywood cabinet construction offers an ultra-compact design which is available in black or white.
The artec 322S is designed for use in active systems. The handles make moving easy.
Technical Specifications
Peak Power Handling
RMS (Average) Power Handling
Frequency Range (-10dB)
Nominal Impedance
On-axis Sensitivity 1 W / 1 m
Maximum Peak SPL at 1 m
HF Horn Coverage Angles (-6dB)
Enclosure Material
Color / Finish
Transducers / Replacement Parts
2
1
3200 W
800 W
37 Hz - 100 Hz (processed)
4 ohms
99 dB SPL
132 dB
---
Birch Plywood
Black or White FX fiberglass paint
LF: 2 x 12P/GM-12P
Dimensions
Connectors
Dimensions (H x W x D)
Weight
Accessories
Notes:
1. Based on a 2 hour test continuously applying 6dB crest factor pink noise.
2. Maximum calculated Peak SPL based on sensitivity and RMS pòwer handling.
Terminal Strip
35.5 x 70 x 68.5 cm 14 x 27.6 x 27 in
42.5kg (93.5 lb)
AX-AR3 / AX-AR3-W JP-320 / JP-320-W ANL-2
ARTEC-322S
Frequency Response
Shows the frequency response (processed) at 1 m of a unit radiating to an anechoic environment and driven by a 4 V swept sine wave signal.
Polar Response
Shows the 1/3 octave band horizontal (continuous) and vertical (dotted) frequencies. Full scale is 40 dB, 10 dB per
polars for the indicated
division.
330°
left/up right/down
300°
270°
120.0
dBSPL
110.0
100.0
90.0
80.0
70.0 10 100 1k 10k 20k10 Hz
30°
60°
330°
300°
30°
60°
330°
300°
10 dB
90°
270°
90°
270°
30°
60°
90°
270°
240°
300°
240°
210°
330°
210°
31 Hz
250 Hz
150°
30°
150°
120°
60°
120°
90°
vertical
horizontal
270°
240°
300°
240°
210°
330°
210°
63 Hz
500 Hz
150°
30°
150°
120°
60°
120°
90°
240°
210°
125 Hz
330°
300°
270°
240°
210°
1 kHz
120°
150°
30°
60°
90°
120°
150°
Recommended processor settings (DAS DSP-2060A or DSP-4080)
High Pass Filter Butterworth 24dB/oct at 40 Hz
Low Pass Filter Butterworth 24dB/oct at 90 Hz
Limiter 800 W RMS; Threshold +5dBu (32dB amplifier Gain), peak limiter +8dBu, 23ms attack time, release x 16
NOTES. 1.Frequency response: referred to 1 m; low end obtained through the use of near field techniques; one-third octave smoothed for correlation with human hearing. 5.Polars were acquired by placing the unit on a computer controlled turntable inside our anechoic chamber. Measurement distance was 4 m.
Product improvement through research and development is a continuous process at D.A.S. Audio. All specifications subject to change without notice.