DAPAudio LIVE 16 User Manual

LIVE 16

ORDERCODE D2211

Congratulations!

You have bought a great, innovative product from DAP Audio.
The DAP Audio LIVE 16 brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated show, this product provides the effect you need.

You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]

You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !

Thank you!

DAP Audio

DAP Audio LIVE 16

™ Product Guide

Warning..…...................................................................................…………………………………………..

Safety-instructions………………………………………………………………………………………….….

Operating Determinations…………………………………………………………………………………….

Description..…..............................................................................……….…………………………………

Features………………………………………………………………………………….………………….….

Overview ..…………………………………………………………………………………….………....…….

Installation...............................................................................…...……………………………………..….

Installation....................................................………………………………………..……….....................

Set Up and Operation.....................................................................……..…………………………….…..

Input Channel Section..............................................................................................…...........……......

Stereo Channel Section…........................................................................................................……....

Master Section.….................................................................................................................……….....

Mixer output section...............................................…………………………………...................…….....

Connection Cables..............................….......................................………..………….…….………….….

Maintenance………..............................….......................................………..………….…….………….….

2
2
3

4
4
4

5
5

5
6

8
10
12

13

14

Troubleshooting………..............................…................................………..………….…….………….…..

Block Diagram………..............................…................................………..………….…….………….……..

Product Specifications.................................................................……………….…….…………………..

14

15

16

1

WARNING

CAUTION!

Keep this system away from rain and moisture!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this system has to:

- be qualified

- follow the instructions of this manual

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the system.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the system are not subject to warranty.

This system contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.

• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!

• Never remove warning or informative labels from the unit.

• Never use anything to cover the ground contact.

• Never leave any cables lying around.

• Do not insert objects into air vents.

• Do not connect this system to a dimmerpack.

• Do not switch the system on and off in short intervals, as this would reduce the system’s life.

• Do not open the device and do not modify the device.

• Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.

• Only use system indoor, avoid contact with water or other liquids.

• Avoid flames and do not put close to flammable liquids or gases.

• Always disconnect power from the mains, when system is not used. Only handle the power-cord by

the plug. Never pull out the plug by tugging the power-cord.

• Always operate the unit with the AC ground wire connected to the electrical system ground.

• Make sure you don’t use the wrong kind of cables or defective cables.

• Make sure that the signals into the mixer are balanced, otherwise hum could be created.

• Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.

2

• Make sure that the available voltage is not higher than stated on the rear panel.

• Make sure that the power-cord is never crimped or damaged. Check the system and the power-cord

from time to time.

• In system setup, the amplifier's output power must be 50%-100% more than the loaded
loudspeakers rated power.

• Please turn off the power switch, when changing the power cord or signal cable, or select the input
mode switch.

• Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level by using the INPUT
control.

• To emphasize a frequency range, you don’t necessarily have to move its respective sliding control
upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next
piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve
(“headroom”)

• Avoid ground loops! Always be sure to connect the power amps and the mixing console to the same
electrical circuit to ensure the same phase!

• If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

• If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.

• If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.

• Repairs, servicing and electric connection must be carried out by a qualified technician.

• For replacement use fuses of same type and rating only.

• WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

3

Description of the device

Features

The LIVE 16 is a mixer from Dap Audio.

• 8 Mono Input Channels with goldplated XLR connectors and balanced Line Inputs

• Ultra-low noise Mic pre-amps with +48 V Phantom Power

• 4 Stereo Input channels with balanced TRS jacks

• 8 additional multi-functional stereo Line inputs

• Extremely high headroom, offering a more dynamic range

• Balanced inputs for highest signal integrity

• Ultra musical 3-band EQ on all channels

• Peak LEDs all Mono and Stereo channels

• 2 AUX Sends per channel for external effects and monitoring

• Separate Master Mix, Control Room and Headphone outputs

• 2-Track inputs assignable to Master Mix, Control Room and Headphone outputs

• Highly accurate 10 LEDs output level indicator

• Rugged design power supply ensures superior signal integrity

Overview

Fig. 1

4