DAPAudio ER-1193 Product Manual

ER-1193

ORDERCODE D145073

ORDERCODE D145082

Congratulations!

You have bought a great, innovative product from DAP Audio.
The DAP Audio ER-1193 brings excitement to any venue.

You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]

You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !

Thank you!

DAP Audio
DAP Audio ER-1193™ Product Guide

Warning..….............................................................................………………………………………………………...........

Unpacking Instructions...........................................................................................................................................

Safety-instructions...................................................................................................................................................

Operating Determinations.....................................................................................................................................

Return Procedure....................................................................................................................................................

Claims.......................................................................................................................................................................

Description..…..............................................................................……….…………………………….………………......

Features………………………………………………………………………………….……………………………….…...

Overview ..…………………………………………………………………………………….………....................……....

Installation...............................................................................…...……………………………………………..……..……

Set Up and Operation.....................................................................……..……………………….……………….….…....

Set Up ……………….............................................…………………………………..................................………........

Menu Options…............................................................................……….…………………………………….………......

Approval...................................................………………………………….........….………………………………….........

Declaration of Conformity......................………………………………….........….………………………………….........

Connection Cables..............................….......................................………..………….…….……………………….…...

Maintenance………..............................….......................................………..………….…….……………………...…....

Troubleshooting………..............................…................................………..………….…….…………………….….…....

Product Specifications.................................................................……………….…….……………………………….....

10
12
13
13
14

2
2
2
3
4
4

5
5
5

6
6

6
6
9

1

2

WARNING

CAUTION!

Keep this device away from rain and moisture!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

• 1x DAP ER-1193

• 2x Antenna’s

• 1x AC-adapter DC12V/500mA

• 1x Jack cable 1,5m

• This user manual

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to
warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non­observance of this manual or any unauthorized modification to the device.

 Never remove warning or informative labels from the unit.
 Never leave any cables lying around.
 Do not open the device and do not modify the device.
 Do not insert objects into air vents.
 Do not connect this device to a dimmerpack.
 Do not switch the system on and off in short intervals, as this would reduce the system’s life.

3

 Only use device indoor, avoid contact with water or other liquids.
 Avoid flames and do not put close to flammable liquids or gases.
 Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

 Make sure you don’t use the wrong kind of cables or defective cables.
 Make sure that the signals to the mixer are balanced, otherwise hum could be created.
 Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.
 Make sure that the available voltage is not higher than stated on the rear panel.
 Make sure that the power-cord is never crimped or damaged. Check the system and the power-

cord from time to time.

 Please turn off the power switch, when changing the power cord or signal cable, or select the

input mode switch.

 If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

 If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your system. Leave
the system switched off until it has reached room temperature.

 If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit

securely (preferably in the original packing material), and return it to your Dap Audio dealer for
service.

 Repairs, servicing and electric connection must be carried out by a qualified technician.
 For replacement use fuses of same type and rating only.

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.

If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

4

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:

1) Your name

2) Your address

3) Your phone number

4) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short­comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.