EM-193
ORDERCODE D145179 790-814Mhz Germany
ORDERCODE D145182 822-846MHz
Congratulations!
You have bought a great, innovative product from DAP Audio.
The DAP Audio EM-193 brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@dap-audio.info
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
Thank you!
DAP Audio
DAP Audio EM-193 Product Guide
Warning..…...................................................................................…………………………………………..
Safety-instructions………………………………………………………………………………………….….
Operating Determinations…………………………………………………………………………………….
Description..…..............................................................................……….…………………………………
Features………………………………………………………………………………….………………….….
Overview..………………………………………..……………………………………………………....…….
Installation..................................................................……………………………..…………………………
Set Up and Operation.....................................................................……..…………………………….……
Maintenance………..............................….......................................………..………….…….………….…..
Troubleshooting………..............................…................................………..………….…….………….…..
Product Specifications.................................................................……………….…….…………………..
2
2
3
4
4
4
4
5
6
6
7
1
WARNING
CAUTION!
Keep this system away from rain and moisture!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this system has to:
- be qualified
- follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Do not switch the system on and off in short intervals, as this would reduce the system’s life.
• Do not open this device.
• Do not run the output of any amplifier channel, back into another channel’s input.
• Do not connect (parallel or series) an amplifier output with any other amplifier output.
• Only use system indoor, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Always disconnect power from the mains, when system is not used. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord.
• Make sure you don’t use the wrong kind of cables or defective cables.
• Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.
• Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
• In system setup, the amplifier's output power must be 50%-100% more than the loaded
loudspeakers rated power.
2
• Sometimes, when you want to send one signal to more than one amplifier, you should use a signal
distributor.
• Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level by using the INPUT
control.
• To emphasize a frequency range, you don’t necessarily have to move its respective sliding control
upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next
piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve
(“headroom”)
• Prevent distortion! Make sure that all components connected to the EM-193 have sufficient power
ratings. Otherwise distortion will be generated because the components are operated at their limits.
• Avoid ground loops! Always be sure to connect the power amps and the mixing console to the same
electrical circuit to ensure the same phase!
• If system is dropped or struck, turn the microphone off. Have a qualified engineer inspect for safety
before operating.
• If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
3
Description of the device
Features
The EM-193 is a professional wireless microphone:
Overview
Fig. 1
Installation
Remove all packing materials from the EM-193. Check that all foam and plastic padding is removed.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
The DAP EM-193 is a hand-held transmitter with cardioid dynamic microphone head. The EM-193 is
suitable for vocal parts and voice transmission and can handle up to 193 switchable transmission
frequencies in the UHF band.
The EM-193 can be used in combination with the DAP receiver ER-1193 (D145079 for Germany 790-814
MHz or D145082 for 822-846 MHz).
You can change the color cap at the end of the microphone, whenever you feel like it.
4
Set Up and Operation
Before turning the Mic-193 on, always make sure that the frequency matches your country.
For Germany you must use D145179 (790-814Mhz).
1) Unscrew the grill of the microphone counter clockwise and take the plastic cover off from the back.
2) Once you have removed the grill. You see a small lip, which you have to push.
3) Pull out the battery holder. Put 2 batteries (2x Battery UM3, AA1.5V) in the holder.
Pay attention to the polarity of the batteries and put them in correctly.
4) Set the switch on the back to ON
5) Now the display will show the frequency
5
6) When you want to alter the settings, you can push A, B or C.
Frequency:
Press and hold the SET-button (A) for 2 seconds. The display will show FREQUE.
Now you can change the frequency by using the Down- (B) and The Up-button (C).
Range is from 790 - 814 MHz (D141579) or 822 - 846 MHz (D145182) in steps from 0.125 MHz.
The MHz-sign on the display keeps flashing.
When you have set the desired frequency press the SET-button again. The display will show STORE.
Sensitivity:
Press and hold the SET-button (A) for 2 seconds. The display will show FREQUE.
Press the SET-button again. The display will show SENSIT.
Now you can change the sensitivity by using the Down- (B) and The Up-button (C).
Range is: -30 dB, -20 dB, -10 dB, 0 dB.
When you have set the desired sensitivity press the SET-button again. The display will show STORE.
Loc:
Press and hold the SET-button (A) for 2 seconds. The display will show FREQUE.
Press the SET-button twice. The display will show Loc OFF.
Now you can change Loc OFF to Loc ON by using the Down- (B) and The Up-button (C).
When you have set the desired sensitivity press the SET-button again. The display will show STORE.
Maintenance
The EM-193 requires almost no maintenance. However, you should keep the unit clean. Set the Mix to OFF,
and then wipe the cover with a damp cloth. Do not immerse in liquid.
Keep connections clean. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
Dap Audio EM-193
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates
properly, do not carry out following steps.
1. If the device does not operate properly, set the switch on the microphone to OFF.
2. Check the batteries, etc.
3. If all of the above appears to be O.K., set the switch to ON.
4. If you are unable to determine the cause of the problem, do not open the microphone, as this may
damage the unit and the warranty will become void.
5. Return the microphone to your Dap Audio dealer.
6
Product Specifications
Model: DAP Audio EM-193
Power supply: 230 VAC, 50 Hz
Power consumption: 10 W
System Specifications
2 Frequencies available: 790 - 814 MHz (Germany)
822 - 846 MHz
Type: Dynamic, moving coil.
Polar pattern: Cardioid
Freq. Resp.: 50-16.000 Hz
Sensitivity (1000Hz): Max. SPL: 138 dB' (1% THD)
Impedance: Power supply: 2x Battery UM3, AA1.5V (not included)
Connector: Net. Weight: 340 g
Dimensions: mic: Ø 50 mm x L 255 mm
Accessories:8 Colour-coded protection caps
1 stand mount
1 storage case
Mini screw driver
Carrier Frequency Range: 600-960 MHz
RF Output: 10mW
Stability: ±0.005%
Frequency Deviation: ±48KHz
LCD Diplay: Frequency, battery fuel gauge
Controls: Power On/Off, mode setting, AF Level Control, Frequency Up/Down, Lock-on mode
Spurious Rejection: <-60 dBC
Display: LCD Display
Dimensions: 257 x Ø47 mm (LxD)
Weight: 345g (including batteries 400g)
Design and product specifications are subject to change without prior notice.
7
2006 Dap Audio.
Loading...