Danze DF022124 Installation Manual [en, es, fr]
CALL 1-888-328-2383 OR VISIT WWW.DANZE.COM
© 2009 DANZE, INC. ALL RIGHTS RESERVED.
Español, página “Español - 1”
Français, page “Français - 1”
Installation Instructions
Cirtangular-Brulée®
24” Freestanding Vanity
DF022124
Pub No. IM-DF022124/03-09.01
IntroductIon to danze
Thank you for choosing Danze. We believe that elements in your bathroom should
awaken your senses like a splash of cool water. That’s what you will experience
with Danze.
Danze is a manufacturer of high quality decorative plumbing products for your
powder room, kitchen and bath. We offer a broad variety of products, designs &
finishes to suit your own particular needs. You can feel confident that our products will provide years of beauty and trouble-free performance.
danze BatHrooM FurnIture ProductS
Danze bathroom furniture products include vanities, mirrors and mirrored cabinets. With beautiful designs and great functionality, our fixtures offer premium
features such as unique finishes, dovetail construction drawers, soft-close door
panels with the highest quality hinges, undermount soft-close glides, height levelers, knobs and beveled mirrors. Our bathroom furniture products also carry the
same design elements and details as our vitreous china products and therefore
make great suites.
Danze bathroom furniture is made with some of the finest wood finishes available.
The rich, deep luster finishes and glazes of our furniture are achieved through a
painstaking 10 or more step application process.
Should you have questions about your Danze purchase, contact us at our website
www.danze.com, or call our technical service center during business hours at
888-328-2383.
Danze, Inc. reserves the right to make product specification changes and to
change or discontinue models without notice or obligation in North America.
Assure that sufficient support is behind the finished wall to allow for a secure
installation of the anchoring hardware. The Cirtangular-Brulée
can be used with the Cirtangular® pedestal basin.
Local Plumbing and Building Codes should be followed for all installations.
®
bathroom vanity
BeFore InStaLLatIon
Check to make sure you have the following parts included in the vanity package:
(A) Cirtangular-Brulée® 24” Freestanding Vanity
(B) Wall Anchor Hardware - **Additional hardware will be necessary if not
installing with drywall
(C) Anchors (2 each)
(C1) Screws (2 each)
(C2) Black Washers (2 each)
(C3) Yellow Caps (2 each) - for protection only, not for installation
2
(S) Flat Washers (2 each)
(U) Touch Up Paint
(V) Welcome to Danze Kit
(W) Installation Instructions
(X) Homeowner Care Manual
(Y) Warranty Parts Guide
Product dIMenSIonS
tooLS reQuIred
Level Pencil
1/4” Drill Bit
3
Hammer Drill
Hole Saw Phillips Screwdriver
InStaLLatIon InStructIonS
1. Carefully position the vanity (A) in front of the
intended installation location.
Safety Glasses
4
2. Measure and mark with a pencil on the back
of your vanity (A) the location of the water pipes
and drain lines coming out of the wall.
5. Check the top of the vanity (A) for level front
to back and side to side. Adjust the height levelers on the bottom of the vanity (A) to achieve
level if necessary.
3. Move vanity (A) away from the wall and cut
pipe holes on the back of the vanity (A) using a
hole saw.
4. Move the vanity (A) back to the intended
installation location, flush against the wall.
6. Use a pencil to mark on the finished wall the
location of the wall anchor holes that are on the
back of the vanity (A).
7. Move vanity (A) away from the wall and drill
1/4” holes for anchors (C) using 1/4” drill bit.
5
6
Loading...