Danze DF012124 Homeowner Manual [en, es, fr]
Homeowner Care Manual
Vanities. Mirrors. Mirrored Cabinets
CALL 1-888-328-2383 OR VISIT WWW.DANZE.COM
© 2007 DANZE, INC. ALL RIGHTS RESERVED.
Pub No. DP620001/09-07.01
Español, página “Español - 1”
Français, page “Français - 1”
INTRODUCTION TO DANZE
Thank you for choosing Danze. We believe that elements in your bathroom should
awaken your senses like a splash of cool water. That’s what you will experience
with Danze.
Danze is a manufacturer of high quality decorative plumbing products for your
powder room, kitchen and bath. We offer a broad variety of products, designs &
fi nishes to suit your own particular needs. You can feel confi dent that our products will provide years of beauty and trouble-free performance.
DANZE BATHROOM FURNITURE PRODUCTS
Danze bathroom furniture products include vanities, mirrors and mirrored cabinets. With beautiful designs and great functionality, our fi xtures offer premium
features such as unique fi nishes, dovetail construction drawers, soft-close doorpanels with the highest quality hinges, undermount soft-close glides, height levelers, knobs and beveled mirrors. Our bathroom furniture pr oducts also carry the
same design elements and details as our vitreous china products and therefore
make great suites.
Danze bathroom furniture is made with some of the fi nest wood fi nishes available.
The rich, deep luster fi nishes and glazes of our furniture are achieved through a
painstaking 10 or more step application process.
Should you have questions about your Danze purchase, contact us at our website
www.danze.com, or call our technical service center during business hours at
888-328-2383.
Danze, Inc. reserves the right to make product specifi cation changes and to
change or discontinue models without notice or obligation in North America.
TROUBLESHOOTING
This troubleshooting guide will assist you with any diffi culties with your new
Danze bathroom furniture.
Tips for your new bathroom furniture components:
Replacing the vanity glide
•
1. Slide drawer out of vanity and pull out lock
tabs on each side of drawer glide.
2
2. Lift front of drawer up.
3. Pull drawer completely out of vanity.
4. Remove Phillips head screw at back of glide
and discard entire assembly.
5. With new glide in place, install Phillips head
screw at back of assembly.
9. The drawer’s position is fi xed and assembled.
Adjusting the vanity glide
•
If necessary, use the following steps to adjust your drawer alignment.
To raise drawer: Turn height adjustment knob
on each glide channel toward the vanity to desired height.
To lower drawer: Turn height adjustment knob
on each glide channel away from the vanity to
desired height.
Replacing the vanity hinge
•
1. To remove the door, depress the tab at the
back of each hinge. Be sure to hold the door
6. Lower back of drawer into glide aligning in-
with your other hand during this step.
dentations with rear anchors.
7. Lower front of drawer into glide, aligning
holes with lock tabs at the inside front of each
glide channel.
2. Place the door on a soft surface to avoid
scratching and remove the two Phillips head
screws from the hinge.
8. Press in glide lock tabs on each side of front of
drawer to complete drawer assembly.
3
4
3. Unscrew the Phillips head screws from the interior hinge bracket and remove.
4. Insert the new hinge into indentation on vanity door and fasten hinge with screws.
5. Align hinge bracket with pilot holes on inside
of vanity and fasten with screws.
HEIGHT: To adjust height of door turn adjusting screws on top and bottom of interior hinge
bracket (circled on the diagram).
SIDE-TO-SIDE: To adjust the door side-to-side,
turn adjusting screw on front of hinge.
DEPTH: To adjust depth of door, turn adjusting
screw on back of hinge to desired depth.
6. Slide the hinge onto the hinge bracket and
press down on back of hinge to lock in place.
CARE & MAINTENANCE
Bathroom Furniture
Use a clean, soft, lint-free cloth to remove dust or other residue. Do not use
•
corrosive or alcohol-containing liquids.
Do not expose to continuous direct sunlight.
•
Avoid extremes in room humidity. Too high or too low humidity can cause
Adjusting the vanity hinge
•
If necessary, use the following steps to adjust your door alignment.
Some models include a cover plate on the front
of the hinge bracket. Remove cover plate before
adjusting; put plate back in place when done.
5
•
the wood to warp or the glue lines to fail.
Avoid extreme changes in temperature.
•
Arrange furniture away from heating & cooling vents.
•
DANZE BATHROOM FURNITURE WARRANTY
One (1) Year Limited Warranty – Bathroom Furniture
Danze, Inc. (Danze) warrants to the original purchaser of this product that the
bathroom furniture wood portion will be free from defects in material and work-
6
Loading...