Danze DC037341WH Installation manual
CALL 1-888-328-2383 OR VISIT WWW.DANZE.COM
© 2007 DANZE, INC. ALL RIGHTS RESERVED.
Español, página “Español - 1”
Français, page “Français - 1”
Installation Instructions
Ziga Zaga™ Collection
Vessel Lavatory
DC037341
Pub No. IM-DC037341/11-07.01
IntroductIon to danze
Rubbing
Alcohol
Thank you for choosing Danze. We believe that elements in your bathroom should
awaken your senses like a splash of cool water. That’s what you will experience
with Danze.
Danze is a manufacturer of high quality decorative plumbing products for your
powder room, kitchen and bath. We offer a broad variety of products, designs &
finishes to suit your own particular needs. You can feel confident that our products will provide years of beauty and trouble-free performance.
danze VItreous chIna Products
Danze vitreous china products include toilets, bidets and lavatories. Our fixtures
reflect state-of-the-art design and engineering, and meet or exceed the most
rigorous plumbing codes throughout North America. Operating fixtures are
equipped with first quality valves and accessories to give you years of troublefree service.
Should you have questions about your Danze purchase, contact us at our website
www.danze.com, or call our technical service center during business hours at
888-328-2383.
Danze, Inc. reserves the right to make product specification changes and to
change or discontinue models without notice or obligation in North America.
Before InstallatIon
Check to make sure you have the following parts included in the lavatory
package:
( A ) Lavatory
( Z ) Cutting Template
( V ) Welcome to Danze Kit
(W) Installation Instructions
( X ) Homeowner Care Manual
tools requIred
Scissors Carpenter’s Level Pencil Saber Saw Adhesive Caulk
Putty Knife
Cloth
Rubbing Alcohol
2
Product dImensIons
!
FINISHED FLOOR
3/8” HOT
3/8” COLD
1 1/4” WASTE
21
1/8
”
11 1/8
”
18
1/2
”
13 3/4
”
16 3/4
”
20 1/4
”
7/8
”
3 1/4
”
9 1/2
”
5
1/8
”
17
”
8
”
6 5/8
”
6 5/8
”
InstallatIon InstructIons
For installation on the Ziga Zaga™ or other bathroom vanities
4. Cut out template (Z) at dashed line. Line up
the centerline arrows on the template (Z) with the
centerlines marked on the slab or counter top.
Trace around the outside of the template (Z).
This line indicates where the outer edge of the
lavatory (A) will be after installation.
5. Cut off the outer rim of the template (Z) at
the solid line. Center the template (Z) inside the
marked line and trace the cutting line on the slab
or counter top.
6. Cut opening in slab or counter top on the
inside line.
7. Assemble faucet and drain (not included) in
lavatory (A) according to the manufacturer’s recommendations.
1. Install the Ziga Zaga™ or other bathroom vanity according to the Installation Instructions provided with the bathroom vanity.
8. Apply two continuous beads of adhesive
caulk (not included) between the opening in the
2. Use a level to assure that the slab or counter
top is perfectly flat in length and width.
slab or counter top and the marked line. Spread
adhesive caulk slightly with a putty knife or
other flat tool.
9. Set the lavatory (A) into the proper position
3. Use a pencil to lightly mark the centerlines for
3
location of the lavatory (A) on the slab or counter
top.
in the slab or counter top, using the outside line
as a guide.
4
Loading...