Danze DC017118 Installation Manual [en, es, fr]
CALL 1-888-328-2383 OR VISIT WWW.DANZE.COM
© 2009 DANZE, INC. ALL RIGHTS RESERVED.
Español, página “Español - 1”
Français, page “Français - 1”
Installation Instructions
Orrington® Collection
24” Self-Rimming Lavatory
DC017118
Pub No. IM-DC017118/07-09.02
IntroductIon to danze
Rubbing
Alcohol
Thank you for choosing Danze. We believe that elements in your bathroom should
awaken your senses like a splash of cool water. That’s what you will experience
with Danze.
Danze is a manufacturer of high quality decorative plumbing products for your
powder room, kitchen and bath. We offer a broad variety of products, designs &
finishes to suit your own particular needs. You can feel confident that our products will provide years of beauty and trouble-free performance.
danze VItreous chIna Products
Danze vitreous china products include toilets, bidets and lavatories. Our fixtures
reflect state-of-the-art design and engineering, and meet or exceed the most
rigorous plumbing codes throughout North America. Operating fixtures are
equipped with first quality valves and accessories to give you years of troublefree service.
Should you have questions about your Danze purchase, contact us at our website
www.danze.com, or call our technical service center during business hours at
888-328-2383.
Danze, Inc. reserves the right to make product specification changes and to
change or discontinue models without notice or obligation in North America.
Before InstallatIon
Check to make sure you have the following parts included in the lavatory
package:
( A ) Lavatory
( Z ) Cutting Template
( V ) Welcome to Danze Kit
(W) Installation Instructions
( X ) Homeowner Care Manual
tools requIred
Scissors Carpenter’s Level Pencil Saber Saw Adhesive Caulk
Putty Knife
Cloth
Rubbing Alcohol
2
Product dImensIons
BEIFTJWF!DBVML
4”
8”
3 1/4”
2 7/8”
8 1/8”
17 3/8”
16 3/4”
23 3/4”
7 1/8”
2 7/8”
7 1/8”
12 3/4”
8”
11 1/4”
3/8” HOT
1 1/4” WASTE
3/8” COLD
FINISHED FLOOR
4. Set the lavatory (A) into the proper position
on top of the Orrington® bathroom vanity. Adjust the lavatory position to assure that there is
an even amount of wood showing around the
base of the lavatory (A).
5. Press down firmly on the lavatory rim to
distribute the adhesive.
6. Remove excess adhesive with a dry cloth.
InstallatIon InstructIons
For installation on the Orrington® bathroom vanity
1. Install the Orrington® bathroom vanity
according to the Installation Instructions
provided with the bathroom vanity.
2. Assemble faucet and drain (not included) in
lavatory (A) according to the manufacturer’s recommendations.
3. Apply a continuous bead of adhesive caulk
(not included) in the groove on the top surface
of the Orrington® bathroom vanity to assure a
water tight seal between the lavatory (A) and
vanity.
7. Dampen a cloth with rubbing alcohol and
clean any unwanted adhesive caulk from the
lavatory surface as soon as lavatory (A) has been
placed.
8. Complete the faucet and drain connections
per the manufacturer’s recommendations.
For installation on other bathroom vanities
1. Use a level to assure that the slab or counter
top is perfectly flat in length and width.
3
4
Loading...