DANLAW DCM970 Users manual

4.7 (3)

DANLAW DATA LOGGER

DCM970

USER MANUAL

Revision: Initial

Revision date: August 2nd, 2018

DANLAW DCM970 Users manual

1.1 Product Overview

Danlaw Data Logger – Vehicle Data Over the Air

Danlaw’s Data Logger was developed to provide companies with an easy to install, wireless communication device for monitoring and logging vehicle network message data. The need for the DDL was driven by Danlaw’s own experience with Networked Automotive Electronics solution development, and perfected to provide our customers with the benefits of our experience.

The Danlaw Data Logger provides:

Support for all major passenger car & light truck protocols

Simple plug-n-go via the vehicle’s OBDII connector

OBD Vehicle Data logging with real-time data stamp

LTE & 3G communication

Support for FTP, TCP/IP data transfer

Firmware Over-The-Air (FOTA) Re-flash

Rugged, compact field-hardened design

No external antenna connections needed

Completely self contained

Danlaw Data Logger - Advantage

DCM970 Features:

High Speed Data Upload – DDL has been demonstrated to significantly reduce the Data Upload time as compared to the speed of other wired and wireless OBDII interface solutions.

Stand Alone Simplicity – Easy plug in and even easier to use. No external connections needed. Eliminates the need for costly power adapters, antenna connections and knowledgeable resources to install the module.

Portability – The DDL has been designed to maximize in-the- field efficiency, light weight, robust, and compact design.

Low Cost Solution – Low optimized data transmission, maintenance and no batteries.

data transmission cost due to cost effective hardware – no

Rugged Design – it’s field ready.

Flexible – Supports all major OEMs including: GM, Ford, DCX, Honda, Toyota, Nissan, BMW, Audi, Volvo and more.

1.2 Product Specifications

Danlaw Data Logger - Specifications

OPERATING VOLTAGE:

12V

POWER

 

CONSUMPTION:

< 100 mA @ 12VDC (Data Upload)

 

< 3 mA Average (during Sleep mode)

HUMIDITY:

90% RH – non condensing

CERTIFICATIONS:

RoHS Compliant

VEHICLE COMMUNICATION:

 

Vehicle Protocol Support:

GMLAN, FNOS, ISO-9141-2, SAE J1850 VPW, SAE J1850 PWM, ISO 14230-4,

 

ISO 15765 (11bit CAN & 29bit CAN), SW CAN

Vehicle Message Data:

Time Stamped Event and Vehicle Message Bus Data Recording including:

 

(All OEM Supported OBDII Data including: VIN, ODO, Time &Date, Vehicle

 

Speed, module connect/disconnect events)

PHYSICAL DIMENSIONS:

Ultra Compact

PACKAGING:

Danlaw Data Logger Enclosure

INSTALLATION TIME:

10 Seconds

NUMBER OF TRIPS:

Unlimited

DATA RECORDING INTERVAL:

Selectable (1 Hz and up)

Loading...
+ 4 hidden pages