Fact sheet | VACON® NXP DC/DC Converter
Feed the DC grid with DC power
Use the VACON® Select tool to select the optimal components for the application. The output of the tool comprises:
Recommended
VACON® NXP DC/DC Converter
Recommended filter
Recommended fuses
Efficiency calculation
Drawings
Report
High power energy storage for DC grids
Energy storage in wind, solar and grid support applications
Load stability for fuel cells
Electrification of the marine sector
Industrial DC backup
Data centers
Emulation of DC load
Use the the VACON® NXP DC/DC Converter as a powerful tool in industrial DC backup, DC grid enablement and in increasing the power range of AC or DC energy storage systems - for distributed grids, isolated grids, or in industry.
Connect to DC sources
The VACON® NXP DC/DC Converter allows common DC bus systems or individual drives to connect their DC bus to alternate DC sources such as batteries
or super capacitors to create hybrid systems.
The energy can flow bi-directionally, either from DC energy source to DC link or from DC link to energy source. By doing this, DC energy sources are utilized to back up the power supply of the system.
DC-grid
enabler
Features and benefits of the Danfoss hybrid solutions
Feature |
|
Benefit |
Wide power range |
|
Reduce variants – solutions are available for applications |
|
||
|
|
in a kW to MW range |
Modular solution |
|
Based on the VACON® NXP platform power modules, |
|
|
the DC bus system can be easily configured |
Wide voltage range |
|
Increase flexibility – Ability to integrate a wide variety |
|
|
of common battery bank voltages using a DC/DC |
|
|
converter |
Flexibility |
|
Easy to upgrade – The simple-to-extend VACON® NXP |
|
|
platform provides great system flexibility with a low |
|
|
additional investment |
Scalability |
|
Solutions can be scaled up to meet future energy |
|
|
requirements in terms of new energy sources, additional |
|
|
storage or to meet increasing demand |
Serviceability |
|
Lower investments – Utilizing the same VACON® NXP |
|
|
hardware configurations, service teams require little to |
|
|
no additional training |
Industry and application knowledge |
|
Made to last – Liquidand air-cooled solutions based on |
|
|
in-depth application knowledge for the most demand- |
|
|
ing industries |
Open approach |
|
Faster Go-To-Market – Wide range of applications made |
|
|
available as foundation for building tailored solutions |
One stop shop |
|
Reduce procurement costs – Airand liquid-cooled |
|
|
drives, AFE, NFE, DC/DC, Grid Converter, DC modules |
|
|
and components are available from one source |
Partnership |
|
Stronger together – System integrators collaborate with |
|
|
a vendor who has a vested interest in their success |
|
|
|
drives.danfoss.com
Specifications
The VACON® NXP DC/ DC Converter includes a specific licensed firmware to provide DC power conversion, based on any of the air-cooled or liquid-cooled VACON® NXP inverter modules, plus filters.
Example: Power range is based on VACON® NXP DC/DC Converter specifications DC-Link and source voltage within
range listed
Technology Enclosure size |
DC-link |
Source |
Power range |
DC-link |
Source |
||
udc voltage |
voltage |
udc voltage |
voltage |
||||
|
|
[V] |
[V] |
[kW] |
[V] |
[V] |
|
Air cooled |
FR4-FR14 |
465-800 |
|
up to 1500 |
750 |
300-700 |
|
FR6-FR14 |
640-1100 |
5-95% of |
up to 2000 |
1050 |
500-1000 |
||
|
|||||||
|
CH3-2xCH64 |
465-800 |
udc |
up to 2100 |
750 |
300-700 |
|
Liquid |
|
||||||
|
|
|
|
|
|
||
cooled |
CH61-2xCH64 |
640-1100 |
|
up to 4100 |
1050 |
500-1000 |
|
|
|
||||||
|
|
|
|
|
|
|
Application examples for AC and DC grids
Marine propulsion |
Electric vehicle charging |
Energy storage in wind, solar and AC grid support applications
Industrial DC backup
DC/DC
ADFIF101
FI10
Steel works
Filter
500kWh
<![if ! IE]><![endif]>EtherNet/IP™ and DeviceNet™ are trademarks of ODVA, Inc.
DKDD.PFP.908.A1.02 |
© Copyright Danfoss Drives | 2019.08 |