Danfoss VACON 100 Fact sheet

Fact Sheet

VACON® 100 Wall Mounted Drive

Available from

0.55 to
200 kW

to fit your application

The VACON® 100 Wall Mounted Drive
is a compact and comprehensive
drive package, with all the necessary
components integrated in a single
drive.

Enclosure ratings

IP21/UL Type 1 (provided as standard)
IP54//UL Type 12 (provided as option,

flange (through-hole) mounting)

Product range
For a wide range of
applications

The VACON® 100 Wall Mounted Drive
is easy to install and operate and is
well suited for a wide range of variable
torque and constant power/torque
applications such as:

 Pumps
 Fans
 Compressors
 Conveyors

Feature Benefit

Reliability

Film capacitors Long life, no reforming

Conformal coating Withstands harsher environments

Ease of installation

Flange mounting

Side-by-side mounting for IP54/UL Type 12

Compact IP54/UL Type 12 with same footprint
as IP21/UL Type 1

Integrated options

Safe Torque Off option Built-in safety

Integrated RFI filter and DC chokes No additional filters required

Built-in Ethernet Immediately connected, no additional hardware

Versatile

Wide motor support:
Induction, PM (permanent magnet) and SynRM
(high-efficiency synchronous reluctance)

Flexible

Drive® Customizer Flexible programming always available

Drive® Programming 61131 application programming

3 x 208-240 V .......................... 0.55-90 kW

3 x 380-500 V .......................... 1.1-160 kW

3 x 525-600 V .......................... 3.0-200 HP

3 x 525-690 V .......................... 5.5-200 kW

Available for

 VACON® 100 INDUSTRIAL
 VACON® 100 FLOW

Easy and cost-effective installation

Only one drive needed

drives.danfoss.com

Specifications

Mains connection

Input voltage 208-240 V; 380-500 V; 525-600 V; 525-690 V

Input frequency 50-60 Hz

Motor connection

Output voltage 0-Input voltage

Output frequency 0-320 Hz

Control connection

I/O 2 x AI, 6 x DI, 1 x AO, 10 Vref, 24 Vin, 2 x 24 Vout, 3 x RO or 2 x RO + TI

Ethernet Modbus TCP/IP, BACnet IP, PROFINET, EtherNet/IP

RS485 Modbus RTU, Metasys N2, BACnet MSTP

Ambient conditions

Ambient operating temperature -10 °C-50 °C (-14 °F-122 °F), derating 1.5%/1 °C above 40 °C (104 °F)

Protection rating IP21/UL Type 1 as standard

EMC

Immunity IEC 61800-3, first and second environment

Emissions IEC 61800-3, Category C2

Functional safety

Safe Torque Off Option board OPT-BJ

IP54/UL Type 12 as option

Options

Factory option Loose option Description

I/O options

+SBF4 OPT-F4-V Optional I/O board: 2 x AI, 6 x DI, 1 x AO, 10 Vref, 24 Vin, 2 x 24 Vout, RS485, 2 x RO, Thermistor input
+S_B1* OPT-B1-V 6 x DI / DO, programmable
+S_B2* OPT-B2-V 2 x RO, Thermistor input
+S_B4* OPT-B4-V 1 x AI, 2 x AO (isolated)
+S_B5* OPT-B5-V 3 x RO
+S_B9* OPT-B9-V 1 x RO, 5 x DI (42-240 VAC)
+S_BF* OPT-BF-V 1 x AO, 1 x DO, 1 x RO
+S_BH* OPT-BH-V 3 x Temp sensor inputs (PT100, PT1000, KTY84-130, KT Y84-150, KTY84-131, NI1000)
Communication options
+FBIE Industrial Ethernet protocols: PROFINET IO and EtherNet/IP (software option onboard)
+S_C4* OPT-C4-V LonWorks
+S_E3* OPT-E3-V PROFIBUS DPV1
+S_E5* OPT-E5-V PROFIBUS DPV1 (D9)
+S_E6* OPT-E6-V CANopen
+S_E7* OPT-E7-V DeviceNet
+S_E9* OPT-E9-V Dual Ethernet communication board (Modbus TCP, PROFINET )
+S_EC* OPT-EC-V EtherCAT
Other options
+S_BJ* OPT-BJ-V Safe Torque Off (STO) / Safe Stop 1 (SS1) / ATEX
+HMTX VACON-PAN-HMTX-MK01 Text keypad
+HMPA PAN-HMPA-MK01 Panel adapter IP54 (dummy keypad)
+SRBT Real-time clock battery
+IP54 VACON-ENC-IP54-MR04/05/06 IP54 enclosure; loose option also available for enclosures MR4, MR5, MR6
+EMC4 Change to EMC-level C4 for IT networks
+DBIN Internal integrated dynamic braking MR7-MR12
+QFLG ENC-QFLG-MR04/05/06/07 Flange mounting MR4-MR7. Loose option available for enclosures MR4-MR7
+QDSS Drive supply switch for MR4-MR7 (IP54)
+QGLC Conduit plate with inch holes, MR4-MR9
+EMAR Marine construction

* Replace ‘_’ with preferred option slot (Example +SCB5 means option board B5 will installed to option slot C in factory)

OPT-F3-V Standard I/O board: 2 x AI, 6 x DI, 1 x AO, 10 Vref, 24 Vin, 2 x 24 Vout, RS485, 3 x RO

DKDD.PFP.900.A1.02 © Copyright Danfoss Drives | 2016.06

EtherNet/IP™ and DeviceNet are trademarks of ODVA, Inc.