TLS4.5F
Standard Compressor
R134a
115V 60Hz
General
Code number 102G3420
Approvals UL984
Compressors on pallet 125
Application
Application LBP
Frequency Hz 50 60
Evaporating temperature °F – -31 to 23
Voltage range V – 103 - 127
Max. condensing temperature continuous (short) °F – 140 (158)
Max. winding temperature continuous (short) °F – 257 (257)
Cooling requirements
Frequency Hz 50 60
Application
90°F – – – S – –
100°F – – – S – –
110°F – – – S – –
Remarks on application:
Motor
Motor type RSIR/CSIR
LRA (rated after 4 sec. UL984), HST | LST A 14.2 12.2
Cut in Current, HST | LST A 14.2 22.6
Resistance, main | start winding (77°F) Ω 3.2 3.4
Design
Displacement cu.in 0.29
Oil quantity (type) .oz. 6.1 (polyolester)
Maximum refrigerant charge oz. 14.0
Free gas volume in compressor .oz. 60.7
Weight without electrical equipment lbs. 14.7
Dimensions
Height inch A 6.42
Suction connector location, I.D. in. | angle C 0.252-0.259 | 30°
material | comment Cu-plated steel | Al cap
Process connector location, I.D. in. | angle D 0.252-0.259 | 31.5°
material | comment Cu-plated steel | Al cap
Discharge connector location, I.D. in. | angle E 0.202-0.205 | 28°
material | comment Cu-plated steel | Al cap
Oil cooler connector location, I.D. in. | angle F –
material | comment –
Remarks:
LBP MBP HBP LBP MBP HBP
B 6.26
B1 –
B2 –
S = Static cooling normally sufcient
O = Oil cooling
F
= Fan cooling 1.5 m/s
1
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufcent
– = not applicable in this area
June 2012 Manufactured by Secop for Danfoss - DEHC.ED.401.D6.22 / 520N1362 1/2
ASHRAE LBP 115V, 60Hz, static cooling, PTC consumption incl.
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 245 340 431 477 654 875 975 1135
Power cons. in W 92 110 123 129 150 174 184 199
Current cons. in A 1.87 1.93 1.99 2.02 2.13 2.27 2.33 2.41
EER in BTU/Wh 2.66 3.10 3.50 3.69 4.34 5.03 5.31 5.71
EN 12900 Household (CECOMAF) 115V, 60Hz, static cooling, PTC consumption incl.
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in W 58 80 102 113 155 208 231 269
Power cons. in W 92 110 123 129 150 174 184 199
Current cons. in A 1.87 1.93 1.99 2.02 2.13 2.27 2.33 2.41
COP in W/W 0.63 0.73 0.83 0.87 1.03 1.19 1.26 1.35
Accessories for TLS4.5F Figure Code number Test conditions
PTC starting device 1/4 in. spade connect.
3/16 in. spade connect. 103N0023 Ambient temp. 90°F 90°F
Starting Relay a2 117U6003 Suction gas temp 90°F 90°F
Start. capacitor 240 µF 1/4 in. spade connect. c 117U5023 Liquid temperature 90°F 131°F
Cover b 103N2011
Cord relief d 103N1010 Mounting accessories Code number
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 Manufactured by Secop for Danfoss - DEHC.ED.401.D6.22 / 520N1362 June 2012
103N0003 Condensing temp. 130°F 131°F
a1
Bolt joint for one comp. Ø: 5 /8 i n. 118-1917
Bolt joint in quantities Ø: 5/ 8 in . 118-1918
Snap-on in quantities Ø: 5 /8 i n. 118-1919
ASHRAE
LBP
EN 12900/
CECOMAF