TLS3FT
Tropical Compressor
R134a
220-240V 50Hz
General
Code number |
|
|
|
|
|
102G4324 |
|
|
||
Approvals |
|
|
|
|
EN 60335-2-34 |
|
||||
Compressors on pallet |
|
|
|
|
|
125 |
|
|
||
Application |
|
|
|
|
|
|
|
|
|
|
Application |
|
|
|
|
|
LBP |
|
|
||
Frequency |
|
Hz |
|
50 |
|
|
|
60 |
|
|
Evaporating temperature |
|
°C |
-35 to -10 |
|
|
– |
|
|||
Voltage range |
|
V |
187 - 254 |
|
|
– |
|
|||
Max. condensing temperature continuous (short) |
°C |
|
60 (70) |
|
|
– |
|
|||
Max. winding temperature continuous (short) |
°C |
125 (135) |
|
|
– |
|
||||
Cooling requirements |
|
|
|
|
|
|
|
|
|
|
Frequency |
|
Hz |
|
50 |
|
|
|
60 |
|
|
Application |
|
|
LBP |
|
MBP |
HBP |
|
LBP |
MBP |
HBP |
32°C |
|
|
S |
|
– |
– |
|
– |
– |
– |
38°C |
|
|
S |
|
– |
– |
|
– |
– |
– |
43°C |
|
|
S |
|
– |
– |
|
– |
– |
– |
Remarks on application: In capillary tube systems where non-equalized pressures may |
||||||||||
occur at compressor start, or in areas with short power supply drop-outs, a starting |
|
|||||||||
capacitor can be used for ensuring a successful start (CSIR |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
Motor |
|
|
|
|
|
|
|
|
|
|
Motor type |
|
|
|
|
|
RSIR |
|
|
||
LRA (rated after 4 sec. UL984), HST | LST |
A |
|
|
– |
|
|
|
2.6 |
|
|
Cut in Current, HST | LST |
|
A |
|
|
– |
|
|
|
6.9 |
|
Resistance, main | start winding (25°C) |
Ω |
|
27.5 |
|
|
|
15.1 |
|
||
Design |
|
|
|
|
|
|
|
|
|
|
Displacement |
|
cm3 |
|
|
|
3.13 |
|
|
||
Oil quantity (type) |
|
cm3 |
|
|
180 (polyolester) |
|
||||
Maximum refrigerant charge |
|
g |
|
|
|
400 |
|
|
||
Free gas volume in compressor |
|
cm3 |
|
|
|
1790 |
|
|
||
Weight without electrical equipment |
kg |
|
|
|
7.5 |
|
|
|||
Dimensions |
|
|
|
|
|
|
|
|
|
|
Height |
|
mm |
A |
|
|
173 |
|
|
||
|
|
|
B |
|
|
169 |
|
|
||
|
|
|
B1 |
|
|
|
– |
|
|
|
|
|
|
B2 |
|
|
|
– |
|
|
|
Suction connector |
location/I.D. mm | angle |
C |
|
|
6.2 | 30° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
Process connector |
location/I.D. mm | angle |
D |
|
|
6.2 | 31.5° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
Discharge connector |
location/I.D. mm | angle |
E |
|
|
5.0 | 28° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
|
|
|
|
|
|
|
|
|
||
Oil cooler connector |
location/I.D. mm | angle |
F |
|
|
|
– |
|
|
||
|
|
|
|
|
|
|
|
|
||
|
material | comment |
|
|
|
|
– |
|
|
||
|
|
|
||||||||
Connector tolerance |
I.D. mm |
±0.09, on 5.0 +0.12/+0.20 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
Remarks: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S = Static cooling normally sufficient
O= Oil cooling
F1 |
= Fan cooling 1.5 m/s |
|
(compressor compartment temperature |
|
equal to ambient temperature) |
F2 |
= Fan cooling 3.0 m/s necessary |
SG |
= Suction gas cooling normally sufficent |
–= not applicable in this area
June 2012 |
Manufactured by Secop for Danfoss - DEHC.ED.401.N7.02 / 520N1369 |
1/2 |
EN 12900 Household (CECOMAF) |
|
220V, 50Hz, static cooling, PTC consumption incl. |
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
Evap. temp in °C |
-45 |
-40 |
|
-35 |
-30 |
-25 |
-23.3 |
-20 |
-15 |
-10 |
-6.7 |
-5 |
0 |
5 |
7.2 |
10 |
|
15 |
20 |
|||||||||||
Capacity in W |
|
|
|
21 |
34 |
|
|
50 |
56 |
69 |
92 |
120 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Power cons. in W |
|
|
|
45 |
53 |
|
|
62 |
65 |
71 |
81 |
92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Current cons. in A |
|
|
|
0.39 |
0.42 |
0.45 |
0.46 |
0.48 |
0.52 |
0.56 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
COP in W/W |
|
|
|
0.46 |
0.63 |
0.80 |
0.86 |
0.97 |
1.14 |
1.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
ASHRAE LBP |
|
|
|
|
220V, 50Hz, static cooling, PTC consumption incl. |
|
|
|
|
|
|
|
|
|
||||||||||||||||
Evap. temp in °C |
-45 |
-40 |
|
-35 |
-30 |
-25 |
-23.3 |
-20 |
-15 |
-10 |
-6.7 |
-5 |
0 |
5 |
7.2 |
10 |
|
15 |
20 |
|||||||||||
Capacity in W |
|
|
|
26 |
42 |
|
|
61 |
69 |
85 |
114 |
149 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Power cons. in W |
|
|
|
45 |
53 |
|
|
62 |
65 |
71 |
81 |
92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Current cons. in A |
|
|
|
0.39 |
0.42 |
0.45 |
0.46 |
0.48 |
0.52 |
0.56 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
COP in W/W |
|
|
|
0.57 |
0.78 |
0.99 |
1.06 |
1.20 |
1.41 |
1.61 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accessories for |
TLS3FT |
Figure |
Code number |
|
|
|
|
PTC starting device |
6.3 mm spade connectors |
a1 |
103N0011 |
|
4.8 mm spade connectors |
103N0018 |
|
|
|
||
Starting relay |
6.3 mm spade connectors |
a2 |
117U6007 |
Start capacitor 60 µF |
6.3 mm spade connectors |
c |
117U5014 |
Cover |
|
b |
103N2010 |
Cord relief |
|
d |
103N1010 |
Protection screen for PTC |
|
g |
103N0476 |
Test conditions |
EN 12900/ |
ASHRAE |
|
CECOMAF |
|
|
|
|
Condensing temperature |
55°C |
55°C |
Ambient temperature |
32°C |
32°C |
Suction gas temperature |
32°C |
32°C |
Liquid temperature |
no subcooling |
32°C |
Mounting accessories |
|
|
Code number |
Bolt joint for one comp. |
Ø: 16 |
mm |
118-1917 |
Bolt joint in quantities |
Ø: 16 |
mm |
118-1918 |
Snap-on in quantities |
Ø: 16 |
mm |
118-1919 |
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 |
Manufactured by Secop for Danfoss - DEHC.ED.401.N7.02 / 520N1369 |
June 2012 |