Danfoss TLES6.5KK.3 Data sheet

TLES6.5KK.3

102H

4738

TLES6.5KK.3

R600a

SUCTION CONNECTOR

8537-3

DANFOSS COMPRESSORS

Barcode on white background

Yellow background

Red stripe

Approvals

Application

8122

R600a

Yellow warning label

157

60.5

102

117

51°

20°

45°

170

178

100

ø16

186

204

ø9

105

107

105

30°

31.5°

28°

176

222

8244

Energy-optimized Compressor R600a 220-240V 50Hz

General

Code number

Approvals

Compressors on pallet

Application

Frequency Hz

Evaporating temperature

Voltage range

Max. condensing temperature continuous (short)

Max. winding temperature continuous (short)

EN 60335-2-34 with Annex AA

50 60

°C -35 to -10 –

V 198 - 254 –

°C 60 (70) –

°C 125 (135) –

102H4738

125

LBP

Cooling requirements at max. ambient temperature

Frequency Hz

Application

32°C S – – – – –

38°C S – – – – –

43°C S – – – – –

Remarks on application:

Motor

Motor type

LRA (rated after 4 sec. UL984), HST | LST

Cut in Current, HST | LST

Resistance, main | start winding (25°C)

Design

Displacement

Oil quantity (type)

Maximum refrigerant charge

Free gas volume in compressor

Weight without electrical equipment

Dimensions

Height

Suction connector location/I.D. mm | angle

Process connector location/I.D. mm | angle

Discharge connector location/I.D. mm | angle

Oil cooler connector location/I.D. mm | angle

Connector tolerance I.D. mm

Remarks:

December 2004 DEHC.ED.520.I1.02 1/2

50 60

LBP MBP HBP LBP MBP HBP

RSIR/RSCR

A – 2.8

A – 7.1

Ω 28.2 17.8

180 (mineral)

g 150

kg 6.4

mm A 163

B 159

B1 –

B2 –

material | comment Cu-plated steel | Al caps

C 6.2 | 30°

D 6.2 | 31.5°

E 5.0 | 28°

material | comment Cu-plated steel | Al caps

F –

material | comment

±0.09, on 5.0 +0.12/+0.20

S = Static cooling normally suﬃcient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally suﬃcent – = not applicable in this area

6.49

1690

–

EN 12900 Household (CECOMAF) 220V, 50Hz, 2 W PTC consumption incl., static cooling

8223

Winding protector

Start winding

Main winding

pos.2

8217

Winding protector

Start winding

Main winding

pos.1

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

45.3 61.3 81.0 88.7 105 134 168

60.4 70.0 79.5 82.8 89.2 99.6 111

0.51 0.55 0.58 0.59 0.62 0.65 0.69

0.75 0.88 1.02 1.07 1.18 1.34 1.51

ASHRAE LBP 220V, 50Hz, 2 W PTC consumption incl., static cooling

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

55.4 75.0 99.0 108 128 163 205

60.5 70.0 79.4 82.6 88.9 99.1 110

0.51 0.55 0.58 0.59 0.61 0.65 0.69

0.92 1.07 1.25 1.31 1.44 1.65 1.85

Accessories Figure Code number Test conditions EN 12900/CECOMAF ASHRAE

PTC starting device 6.3 mm spade connectors

ePTC starting device 4.8 mm spade connectors

PTC starting device 6.3 mm spade connectors

Cover

Cord relief

Run capacitor 4 µF (optional)

Protection screen for PTC

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 DEHC.ED.520.I1.02 December 2004

4.8 mm spade connectors

6.3 mm spade connectors

4.8 mm spade connectors

(pos.1)

a1 103N0016 Liquid temperature no subcooling 32°C

(pos.2) 103N0021

b 103N2010

d 103N1010 Mounting accessories Code number

g 103N0476 Snap-on in quantities Ø: 16 mm 118-1919

103N0011 Condensing temperature 55°C 54.4°C

103N0018 Ambient temperature 32°C 32°C

103N0050 Suction gas temperature 32°C 32°C

117-7117 Bolt joint for one compressor Ø: 16 mm 118-1917

117-7119 Bolt joint in quantities Ø: 16 mm 118-1918