Danfoss TL5F Data sheet

TL5F

Standard Compressor

R134a

220-240V 50Hz

General

Code number						102G4501
Approvals			EN 60335-2-34 w. Annex AA, CCC
Compressors on pallet						125
Application
Application						LBP
Frequency		Hz		50					60
Evaporating temperature		°C	-35 to -10						–
Voltage range		V	198 - 254						–
Max. condensing temperature continuous (short)		°C		60 (70)					–
Max. winding temperature continuous (short)		°C	125 (135)						–
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP	HBP
32°C			S		–	–		–	–	–
38°C			S		–	–		–	–	–
43°C			–		–	–		–	–	–
Remarks on application:

Motor
Motor type						RSIR/CSIR
LRA (rated after 4 sec. UL984), HST \| LST		A		5.1					4.3
Cut in Current, HST \| LST		A		5.1					8.6
Resistance, main \| start winding (25°C)		Ω		18.2					15.1
Design
Displacement		cm3				5.08
Oil quantity (type)		cm3			180 (polyolester)
Maximum refrigerant charge		g				400
Free gas volume in compressor		cm3				1790
Weight without electrical equipment		kg				7.5
Dimensions
Height		mm	A			173
			B			169
			B1				–
			B2				–
Suction connector	location/I.D. mm \| angle		C			6.2 \| 30°
	material \| comment			Cu-plated steel \| Al cap
Process connector	location/I.D. mm \| angle		D			6.2 \| 31.5°
	material \| comment			Cu-plated steel \| Al cap
Discharge connector	location/I.D. mm \| angle		E			5.0 \| 28°
	material \| comment			Cu-plated steel \| Al cap

Oil cooler connector	location/I.D. mm \| angle		F				–

	material \| comment						–

Connector tolerance	I.D. mm		±0.09, on 5.0 +0.12/+0.20

Remarks:

S = Static cooling normally sufficient

O= Oil cooling

F1	= Fan cooling 1.5 m/s
	(compressor compartment temperature
	equal to ambient temperature)
F2	= Fan cooling 3.0 m/s necessary
SG	= Suction gas cooling normally sufficent

–= not applicable in this area

June 2012

Manufactured by Secop for Danfoss - DEHC.ED.401.B4.02 / 520N1367

1/2

EN 12900 Household (CECOMAF)				220V, 50Hz, static cooling, PTC consumption incl.
Evap. temp in °C	-45	-40	-35	-30	-25	-23.3	-20	-15	-10	-6.7	-5	0	5	7.2	10	15	20
Capacity in W			43	60	82	91	110	144	183
Power cons. in W			70	85	101	107	118	136	154
Current cons. in A			0.75	0.78	0.81	0.83	0.86	0.91	0.97
COP in W/W			0.61	0.70	0.81	0.85	0.93	1.06	1.19
ASHRAE LBP				220V, 50Hz, static cooling, PTC consumption incl.
Evap. temp in °C	-45	-40	-35	-30	-25	-23.3	-20	-15	-10	-6.7	-5	0	5	7.2	10	15	20
Capacity in W			53	74	101	112	136	177	226
Power cons. in W			70	85	101	107	118	136	154
Current cons. in A			0.75	0.78	0.81	0.83	0.86	0.91	0.97
COP in W/W			0.75	0.86	1.00	1.05	1.15	1.30	1.47

Accessories for	TL4F	Figure	Code number

PTC starting device	6.3 mm spade connectors	a1	103N0011
	4.8 mm spade connectors	a1	103N0018
	4.8 mm spade connectors		103N0018
Starting relay	6.3 mm spade connectors	a2	117U6004
Start capacitor 60 µF	6.3 mm spade connectors	c	117U5014
Cover		b	103N2010
Cord relief		d	103N1010
Protection screen for PTC		g	103N0476

Test conditions	EN 12900/	ASHRAE
	CECOMAF

Condensing temperature	55°C	55°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	no subcooling	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.401.B4.02 / 520N1367

June 2012