Danfoss TL4G Data sheet

TL4G Universal Compressor R134a 100-115V 50/60Hz

General

Code number 102G3462

Approvals UL984

Compressors on pallet 125

Application

Application LBP/HBP

Frequency Hz 50 60

Evaporating temperature °F -31 to 59 -31 to 59

Voltage range V 90 - 127 90 - 127

Max. condensing temperature continuous (short) °F 140 (158) 140 (158)

Max. winding temperature continuous (short) °F 257 (275) 257 (275)

Cooling requirements

Frequency Hz 50 60

Application

90°F S S S S S S

100°F S S S S S S

110°F S S S S S S

Remarks on application: - max. ambient temperature at 100V: 100°F

- max. ambient temperature at 115V: 110°F

Motor

Motor type RSIR/CSIR

LRA (rated after 4 sec. UL984), HST | LST A 14.2 12.2

Cut in Current, HST | LST A 14.2 22.6

Resistance, main | start winding (77°F) Ω 3.7 3.4

Design

Displacement cu.in 0.23

Oil quantity (type) .oz. 9.5 (polyolester)

Maximum refrigerant charge oz. 14.0

Free gas volume in compressor .oz. 54.3

Weight without electrical equipment lbs. 16.7

Dimensions

Height inch A 6.81

Suction connector location, I.D. in. | angle C 0.252-0.259 | 30°

material | comment Cu-plated steel | Rubber plug

Process connector location, I.D. in. | angle D 0.252-0.259 | 31.5°

material | comment Cu-plated steel | Rubber plug

Discharge connector location, I.D. in. | angle E 0.202-0.205 | 28°

material | comment Cu-plated steel | Rubber plug

Oil cooler connector location, I.D. in. | angle F –

material | comment –

Remarks:

LBP MBP HBP LBP MBP HBP

B 6.65

B1 –

B2 –

S = Static cooling normally sufcient

O = Oil cooling F

= Fan cooling 1.5 m/s

(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG = Suction gas cooling normally sufcent

– = not applicable in this area

Dec 2011 Manufactured by Secop for Danfoss - DEHC.ED.400.F7.22 / 502N1264 1/2

ASHRAE LBP 115V, 60Hz, static cooling

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in BTU/h 131 203 272 306 441 612 696 824 1078 1138 1380 1550 1733 2097

Power cons. in W 71 82 91 96 111 129 136 147 167 170 187 197 207 225

Current cons. in A 1.69 1.72 1.74 1.75 1.79 1.86 1.9 1.96 2.10 2.14 2.30 2.41 2.55 2.83

EER in BTU/Wh 1.83 2.47 2.97 3.19 3.96 4.76 5.15 5.60 6.47 6.68 7.39 7.87 8.37 9.32

ASHRAE HBP 115V, 60Hz, static cooling

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in BTU/h 116 180 241 271 391 542 617 729 954 1009 1220 1369 1530 1849

Power cons. in W 71 82 91 96 111 129 136 147 167 170 187 197 207 225

Current cons. in A 1.69 1.72 1.74 1.75 1.79 1.86 1.90 1.96 2.10 2.14 2.30 2.41 2.55 2.83

EER in BTU/Wh 1.63 2.19 2.64 2.83 3.51 4.22 4.53 4.95 5.72 5.93 6.53 6.95 7.39 8.22

EN 12900 Household (CECOMAF) 115V, 60Hz, static cooling

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in W 31 49 65 73 105 146 163 197 257 268 328 368 412 497

Power cons. in W 71 82 91 96 111 129 136 147 167 170 187 197 207 225

Current cons. in A 1.69 1.72 1.74 1.75 1.79 1.86 1.90 1.96 2.10 2.14 2.30 2.41 2.55 2.83

COP in W/W 0.44 0.59 0.71 0.76 0.95 1.14 1.20 1.33 1.54 1.56 1.76 1.87 1.99 2.21

Accessories for TL4G Figure Code number Test conditions

PTC starting device 1/4 in. spade connect.

3/16 in. spade connect. 103N0023 Ambient temp.

103N0003 Condensing temp.

Starting relay 1/4 in. spade connect. a2 117U6003 Suction gas temp.

Cover b 103N2011 Liquid temperature

ASHRAE

LBP

130°F 130°F

90°F 95°F

90°F 115°F

HBP

EN 12900/

CECOMAF

131°F

90°F

131°F

Start. capacitor 240 µF 1/4 in. spade connect. c 117U5023

Cord relief d 103N1010 Mounting accessories Code number

Bolt joint for one comp. Ø : 5 /8 in . 118-1917

Bolt joint in quantities Ø: 5/ 8 in. 118-1918

Snap-on in quantities Ø : 5/8 in . 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.

2/2 Manufactured by Secop for Danfoss - DEHC.ED.400.F7.22 / 502N1264 Dec 2011