Danfoss TL3F Data sheet

TL3F Standard Compressor R134a 115V 60Hz

General

Code number 102G3300

Approvals UL984

Compressors on pallet 125

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °F – -13 to 23

Voltage range V – 103 - 127

Max. condensing temperature continuous (short) °F – 140 (158)

Max. winding temperature continuous (short) °F – 257 (257)

Cooling requirements

Frequency Hz 50 60

Application

90°F – – – S S –

100°F – – – S S –

110°F – – – S S –

Remarks on application:

Motor

Motor type RSIR

LRA (rated after 4 sec. UL984), HST | LST A – 6.0

Cut in Current, HST | LST A – 15.0

Resistance, main | start winding (77°F) Ω 6.3 4.8

Design

Displacement cu.in 0.19

Oil quantity (type) .oz. 6.1 (polyolester)

Maximum refrigerant charge oz. 14.0

Free gas volume in compressor .oz. 54.3

Weight without electrical equipment lbs. 14.7

Dimensions

Height inch A 6.42

Suction connector location, I.D. in. | angle C 0.378-0.385 | 30°

material | comment Cu-plated steel | Al cap

Process connector location, I.D. in. | angle D 0.252-0.259 | 31.5°

material | comment Cu-plated steel | Al cap

Discharge connector location, I.D. in. | angle E 0.252-0.259 | 28°

material | comment Cu-plated steel | Al cap

Oil cooler connector location, I.D. in. | angle F –

material | comment –

Remarks:

LBP MBP HBP LBP MBP HBP

B 6.30

B1 –

B2 –

S = Static cooling normally sufcient O = Oil cooling F

= Fan cooling 1.5 m/s

(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sufcent – = not applicable in this area

June 2012 Manufactured by Secop for Danfoss - DEHC.ED.401.C2.22 / 520N1358 1/2

ASHRAE LBP 115V, 60Hz, static cooling

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68

Capacity in BTU/h 229 253 352 479 539 639

Power cons. in W 72.3 76.9 92.4 108 115 125

Current cons. in A 1.09 1.12 1.21 1.32 1.38 1.47

EER in BTU/Wh 3.16 3.30 3.81 4.43 4.70 5.13

EN 12900 Household (CECOMAF) 115V, 60Hz, static cooling

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68

Capacity in W 184 204 283 385 433 514

Power cons. in W 72.0 76.7 92.2 108 115 125

Current cons. in A 1.09 1.11 1.21 1.32 1.38 1.47

COP in W/W 2.56 2.66 3.07 3.56 3.77 4.11

Accessories for TL3F Figure Code number Test conditions

PTC starting device 1/4 in. spade connect.

3/16 in. spade connect. 103N0023 Ambient temp. 90°F 90°F

Cover b 103N2011 Suction gas temp. 90°F 90°F

Cord relief d 103N1010 Liquid temperature 90°F no subcooling

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 Manufactured by Secop for Danfoss - DEHC.ED.401.C2.22 / 520N1358 June 2012

103N0003 Condensing temp. 130°F 131°F

Mounting accessories Code number

Bolt joint for one comp. Ø: 5 /8 i n. 118-1917

Bolt joint in quantities Ø: 5/8 in. 118-1918

Snap-on in quantities Ø: 5/8 in. 118-1919

ASHRAE

LBP

EN 12900/

CECOMAF