Danfoss TL3CN LBP, TL3CN MBP Data sheet

TL3CN

LBP/MBP Compressor

R290

220-240V 50Hz

General

Code number						102H4380
Approvals					EN 60335-2-34
Compressors on pallet						125
Application
Application						LBP/MBP
Frequency		Hz		50					60
Evaporating temperature		°C	-40 to 5						–
Voltage range		V	198 - 254						–
Max. condensing temperature continuous (short)		°C		55 (65)					–
Max. winding temperature continuous (short)		°C	125 (135)						–
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP	HBP
32°C			F1		F1	–		–	–	–
38°C			F1		F1	–		–	–	–
43°C			F1		F1	–		–	–	–
Remarks on application:

Motor
Motor type						RSIR/CSIR
LRA (rated after 4 sec. UL984), HST \| LST		A		5.4					4.2
Cut in Current, HST \| LST		A		5.4					8.4
Resistance, main \| start winding (25°C)		Ω		17.9					17.7
Design
Displacement		cm3				3.13
Oil quantity (type)		cm3			280 (polyolester)
Maximum refrigerant charge		g				150
Free gas volume in compressor		cm3				1590
Weight without electrical equipment		kg				6.8
Dimensions
Height		mm	A			163
			B			159
			B1				–
			B2				–
Suction connector	location/I.D. mm \| angle		C			6.2 \| 30°
	material \| comment			Cu-plated steel \| Al cap
Process connector	location/I.D. mm \| angle		D			6.2 \| 31.5°
	material \| comment			Cu-plated steel \| Al cap
Discharge connector	location/I.D. mm \| angle		E			5.0 \| 28°
	material \| comment			Cu-plated steel \| Al cap
Oil cooler connector	location/I.D. mm \| angle		F				–
	material \| comment						–
Connector tolerance	I.D. mm		±0.09, on 5.0 +0.12/+0.20
Remarks:

= Static cooling normally sufficient

= Oil cooling

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

= Fan cooling 3.0 m/s necessary

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - DEHC.ED.540.H2.02

1/2

EN 12900 Household (CECOMAF)*				220V, 50Hz, 2 W PTC consumption incl., fan cooling F1
Evap. temp. in °C	-45	-40	-35	-30	-25	-23.3	-20	-15	-10	-6.7	-5	0	5	7.2	10	15	20
Capacity in W		38	54	75	99	108	128	161	200	228	244	294	351
Power cons. in W		81	90	99	108	111	117	126	135	141	144	153	162
Current cons. in A		0.82	0.84	0.87	0.89	0.90	0.91	0.94	0.97	0.99	1.00	1.03	1.06
COP in W/W		0.46	0.60	0.75	0.92	0.97	1.09	1.28	1.48	1.62	1.70	1.93	2.17
ASHRAE LBP*				220V, 50Hz, 2 W PTC consumption incl., fan cooling F1
Evap. temp. in °C	-45	-40	-35	-30	-25	-23.3	-20	-15	-10	-6.7	-5	0	5	7.2	10	15	20
Capacity in W		43	62	85	113	123	145	183	226	258	276	333	397
Power cons. in W		81	90	99	107	110.4	116	125	133	139	142	150	159
Current cons. in A		0.82	0.84	0.87	0.89	0.90	0.91	0.94	0.96	0.98	0.99	1.02	1.05
COP in W/W		0.54	0.69	0.86	1.05	1.11	1.25	1.46	1.70	1.86	1.95	2.21	2.49

Accessories for	TL3CN	Figure	Code number

PTC starting device	6.3 mm spade connectors	a1	103N0011
	4.8 mm spade connectors	a1	103N0018
	4.8 mm spade connectors		103N0018
Starting relay	6.3 mm spade connectors	a2	117U7004
Start. capacitor 60 µF	6.3 mm spade connectors	c	117U5014
Cover		b	103N2010
Cord relief		d	103N1010
Protection screen for PTC		g	103N0476

Test conditions	EN 12900/	ASHRAE LBP*
	CECOMAF*
Condensing temperature	45°C	43.3°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	no subcooling	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.540.H2.02

Dec 2011