Danfoss TL2.5G Data sheet
TL2.5G
Universal Compressor
R134a
220-240V 50/60Hz
General
Code number 102G4250
Approvals
Compressors on pallet 125
Application
Application LBP/HBP
Frequency Hz 50 60
Evaporating temperature °F -31 to 59 -31 to 59
Voltage range V 187 - 254 198 - 254
Max. condensing temperature continuous (short) °F 140 (158) 140 (158)
Max. winding temperature continuous (short) °F 257 (275) 257 (275)
EN 60335-2-34 Annex AA , UL984
Cooling requirements
Frequency Hz 50 60
Application
90°F S S S S S S
100°F S S S S S S
110°F S S F
Remarks on application: HBP 50Hz: 198 - 254V
HBP 60Hz: 207 - 254V
Motor
Motor type RSIR/CSIR
LRA (rated after 4 sec. UL984), HST | LST A 4.5 2.8
Cut in Current, HST | LST A 4.5 7.2
Resistance, main | start winding (77°F) Ω 32.7 15.5
Design
Displacement cu.in 0.16
Oil quantity (type) .oz. 9.5 (polyolester)
Maximum refrigerant charge oz. 14.0
Free gas volume in compressor .oz. 54.3
Weight without electrical equipment lbs. 14.7
Dimensions
Height inch A 6.42
Suction connector location, I.D. in. | angle C 0.252-0.259 | 30°
material | comment Cu-plated steel | Al cap
Process connector location, I.D. in. | angle D 0.252-0.259 | 31.5°
material | comment Cu-plated steel | Al cap
Discharge connector location, I.D. in. | angle E 0.189-0.193 | 90°
material | comment Cu-plated steel | Al cap
Oil cooler connector location, I.D. in. | angle F –
material | comment –
Remarks:
LBP MBP HBP LBP MBP HBP
S S F
2
B 6.26
B1 –
B2 –
S = Static cooling normally sufcient
O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufcent
2
– = not applicable in this area
Dec 2011 Manufactured by Secop for Danfoss - DEHC.ED.401.Z3.22 / 520N1041 1/2
ASHRAE LBP 220V, 50Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 53.8 108 152 173 250 342 385 454 588 747
764
836 934 1130
Power cons. in W 48.1 54.4 59.5 61.9 70.4 79.7 83.7 89.8 101 112 113 117 123 134
Current cons. in A 0.48 0.49 0.50 0.50 0.52 0.54 0.55 0.57 0.59 0.63 0.63 0.64 0.66 0.69
EER in BTU/Wh 1.12 1.99 2.56 2.79 3.55 4.29 4.59 5.05 5.85 6.69 6.77 7.13 7.58 8.46
ASHRAE LBP 220V, 60Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 65.6 129 179 203 291 399 447 527 682 865 885 969 1081 1307
Power cons. in W 53.8 61.3 67.4 70.2 80.3 91.4 96.1 103 116 129 131 136 143 155
Current cons. in A 0.46 0.47 0.48 0.49 0.50 0.52 0.53 0.55 0.57 0.60 0.61 0.62 0.64 0.67
EER in BTU/Wh 1.22 2.10 2.66 2.89 3.63 4.36 4.65 5.10 5.87 6.69 6.77 7.12 7.57 8.41
EN 12900 Household (CECOMAF) 220V, 50Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 41.6 85.9 121 138 200 274 308 364 471 598 612 669 747 902
Power cons. in W 48.1 54.5 59.6 62.0 70.5 79.9 83.9 90.1 101 112 113 118 124 134
Current cons. in A 0.48 0.49 0.50 0.51 0.52 0.54 0.55 0.57 0.60 0.63 0.63 0.64 0.66 0.70
EER in BTU/Wh 0.86 1.58 2.03 2.22 2.83 3.43 3.67 4.04 4.67 5.33 5.40 5.68 6.04 6.72
EN 12900 Household (CECOMAF) 220V, 60Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 50.8 102 143 162 234 320 359 423 546 693 709 775 865 1044
Power cons. in W 53.9 61.4 67.5 70.3 80.4 91.6 96.3 104 116 130 131 137 144 156
Current cons. in A 0.46 0.47 0.48 0.49 0.50 0.52 0.53 0.55 0.57 0.60 0.61 0.62 0.64 0.67
EER in BTU/Wh 0.94 1.66 2.12 2.30 2.90 3.49 3.72 4.08 4.69 5.34 5.40 5.67 6.02 6.68
Accessories for TL2.5G Figure Code number Test conditions
PTC starting device 1/4 in. spade connect.
3/16 in. spade connect. 103N0018 Ambient temp. 90°F 90°F
a1
103N0011 Condensing temp. 130°F 131°F
ASHRAE LBP
EN 12900/CECOMAF
Starting relay 1/4 in. spade connect. a2 117U6007 Suction gas temp 90°F 90°F
Cover b 103N2011 Liquid temperature 90°F no subcooling
Start. capacitor 60 µF 1/4 in. spade connect. c 117U5014
Cord relief d 103N1010 Mounting accessories Code number
Protection screen for PTC g 103N0476 Bolt joint for one comp. Ø: 5/8 in. 118-1917
Bolt joint in quantities Ø: 5/8 in. 118-1918
Snap-on in quantities Ø: 5/8 in. 118-1919
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 Manufactured by Secop for Danfoss - DEHC.ED.401.Z3.22 / 520N1041 Dec 2011
Loading...