Danfoss Thermostat UT Data sheet

Data sheet

Thermostat
UT

The UT thermostat is a temperature-controlled
electric switch with copper capillary and sensor.

The temperature can be set easily and accurately
using the large knob on the front of the
thermostat. The temperature must be set to
correspond to the required mean temperature.

Features

Approvals

• The thermostat has a xed dierential

• Electric connections are made by means of
AMP quick connectors

CE-marked in accordance with:

• LVD 2006/95/EC
EN 60730-1-2000)

• UT is available for wall or panel mounting, and
can be used for: cold rooms, beverage coolers,
ice cream makers, milk coolers, refrigerated
counters, air-conditioning plant,
heat recovery systems

• EMC directive 2004/108/EC
(EN 61000-6-3-2002; EN 61000-6-1-2002)

© Danfoss | DCS (rm) | 2019.04

DKRCC.PD.CC0.B6.22 | 1

Data sheet | Thermostat, UT

Technical data

Ordering

Range -30 – 30 °C / -20 – 85 °F

Ambient temperature -30 – 55 °C / -20 – 130 °F

Reset Automatic

Dierential Fixed, 3.0 K

Switch system Changeover (SPDT) switch

AC-1: 16 A / 250 V

Contact load (max.)

Capillary tube and sensor Copper

UT for wall mounting IP20 to EN 60529 / IEC 529

UT for building in IP00 to EN 60529 / IEC 529

Version Type

Wall mounting UT 72 3.0 aut. 80 176 3.0 59 1 060H1708

Building in UT 72 3.0 aut. 80 176 3.0 59 48 060H1805

Dierential

[K] [°C] [°F] [m] [in]

Reset

AC-3: 7.5 A / 250 V

AC-15: 1 A / 250 V

Max. sensor

temperature

Capillary tube length

Qty. Code no.

Accessories

Type Qty. Code no.

Setting knobs (-30 – 30 °C / -20 – 85 °F) 48 060-1068

© Danfoss | DCS (rm) | 2019.04

DKRCC.PD.CC0.B6.22 | 2