Danfoss SV15-22-01 Technical Information

Solenoid Valves Technical Information

2 Way, 2 Position Spool SV15-22-01

OPERATION

Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type, High Flow (15-Size). When de-energized, the SV15-22-01 allows ow in both directions. When energized, ow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation. This valve is a direct replacement for EDH 12/NA and uses a metric M33x2 cavity (NCS 12/2) for high ow capability.

APPLICATIONS

These spool-type valves are primarily used in mobile and industrial applications for blocking the ow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input. Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 100,000 cycles. In case of inlet from port 2 this value can be increased to 300,000 cycles.

Shown with Standard Coil, DIN Connector

SPECIFICATIONS SCHEMATIC

Rated Pressure* 210 bar [3000 psi]**

Maximum Rated Flow at 7 bar

[100 psi] Weight including coil 0.65 kg [1.65 lbs]

Cavity NCS 12/2 Coil M19 33 Watt Diode (Optional) Unidirectional

* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

** See 315 bar pressure rating note on page 10.

60 l/min [16 US gal/min]

PERFORMANCE CURVES

BC332375861112en-000101 • February 2020

SV - 111

Solenoid Valves Technical Information

2 Way, 2 Position Spool SV15-22-01

DIMENSIONS

mm [in]

EXAMPLE CIRCUITS

Cross-sectional view

ORDERING INFORMATION

BC332375861112en-000101 • February 2020

SV - 112