Danfoss SV10-24-13 Technical Information

Solenoid Valves Technical Information

4

2

3

1

4-Way, 2-Position Spool
SV10-24-13

OPERATION

Solenoid Valve, Spool Type, 2-Position, 4-Way, 10-Size. When de-energized, all
ports on the SV10-24-13 are open. When energized, the spool shifts allow from
port 3 to port 2, and from port 4 to port 1. Follow the “Operating Envelope” limits
to ensure shifting of the valve during operation.

APPLICATIONS

These spool-type valves are primarily used in mobile and industrial applications
for connecting both sides of a motor (free-wheeling) or cylinder to both the
pressure and tank ports when not energized. Then, when energized, the valve
provides unidirectional ow to the motor or cylinder. Solenoid spool-type
valves are direct acting and respond quickly to coil voltage input. Spool valves
will have some leakage due to spool clearance, so if your application requires
no leakage at the working port(s), apply a low leakage poppet valve(s), like PO
check valve, counterbalance valve, etc., in addition to this solenoid valve. This
valve can be operated with an inlet pressure of 315 bar on port 3 for 400,000
cycles. Port 1 is not intended as inlet (Tank only).

Shown with Standard Coil,
Deutsch Connector

SPECIFICATIONS SCHEMATIC

Rated pressure* 230 bar [3300 psi]**

Rated ow at 7 bar

[100 psi]
Weight 0.45 kg [0.99 lb]

Cavity SDC10-4
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt

* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

** See 315 bar pressure rating note on page 10.

21 l/min
[6 US gal/min]

Robust Nut P/N 173804910
(no coil O-rings needed)

PERFORMANCE CURVES

BC332375861112en-000101 • February 2020

SV - 189

Solenoid Valves Technical Information

27 mm

[3.03]

[2.44]

4-Way, 2-Position Spool
SV10-24-13

DIMENSIONS

mm [in]

9-11 Nm [80-97 lbf•in]

Standard
P/N 17400031

(coil O-rings included)

24 mm

Coil nut kit

EXAMPLE CIRCUITS

h
t

INSTALL O-RING (2) PLCS AS SHOWN

45-50 Nm [33-37 lbf•ft]

COIL NOT SHOWN FOR CLARITY

Cross-sectional view

h
t

5.0

[0.2]

77.0

Free Wheel and Motor Control

7/8-14UNF-2A

62.0

1

Ø26.5 [1.04]

34

2

ORDERING INFORMATION

BC332375861112en-000101 • February 2020

SV - 190