
Solenoid Valves Technical Information
4-Way, 2-Position Spool
SV08-24-08
OPERATION
Solenoid Valve, Spool Type, 2-Position, 4-Way, 08-size. When de-energized,
the SV08-24-08 allows ow from ports 2 and 4 to port 1, while port 3 is
blocked. When energized, the spool shifts to allow ow from port 3 to 4,
and from 2 to 1. Follow the “Operating Envelope” limits to ensure shifting
of the valve during operation.
APPLICATIONS
These spool-type valves are primarily used in mobile and industrial
applications for connecting both sides of a motor (free-wheeling) or
cylinder to tank when not energized. Then, when energized, the valve
provides unidirectional ow to the motor or cylinder. Solenoid spool-type
valves are direct acting and respond quickly to coil voltage input. Spool
valves will have some leakage due to spool clearance, so if your application
requires no leakage at the working port(s), apply a low leakage poppet
valve(s), like PO check valve, counterbalance valve, etc., in addition to this
solenoid valve. This valve can operate with an inlet pressure of 315 bar on
port 3 for 500,000 cycles. Port 1 is not intended for use as inlet (Tank only).
Shown with Robust Coil,
Metri-Pack Type 2 Connector
SPECIFICATIONS SCHEMATIC
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
Weight 0.45 kg [0.99 lb]
Cavity SDC08-4
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
24 l/min
[6 US gal/min]
Robust Nut P/N 173800539
(no coil O-rings needed)
PERFORMANCE CURVES
psi bar
348
290
232
174
116
58
0
US gal/min
1) 3 to 2 to 4 to 1 Energized
2) 4 to 1 De-Energized
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
24
20
16
12
8
4
0
0
l/min
24
0.5
1.11.6 4.84.22.13.73.2
2.6
1
2
3
8
12 1410
6
BC332375861112en-000101 • February 2020
SV - 185

Solenoid Valves Technical Information
4-6 Nm
[35-53 lbf*in
Coil Nut Kit
P/N 173800588
4-Way, 2-Position Spool
SV08-24-08
DIMENSIONS
mm [in]
20 mm
]
EXAMPLE CIRCUITS
Cross-sectional view
35-40 Nm [26-30 lbf*ft]
COIL NOT SHOWN
FOR CLARITY
INSTALL O-RING (2) PLCS
AS SHOWN
Free wheel on Uni-directional Motor
24 mm
2.5
[0.1]
[2.35]
3/4-16 UNF-2A
4
53.859.8
[2.12]
1
Ø23.8
3
2
P108 aaaE
P
ORDERING INFORMATION
BC332375861112en-000101 • February 2020
SV - 186