Danfoss SV08-24-01 Technical Information

Solenoid Valves Technical Information

4-Way, 2-Position Spool

SV08-24-01

OPERATION

Solenoid Valve, Spool Type, 2-Position, 4-Way, 08-size. When de-energized, the SV08-24-01 allows flow from port 3 to port 2, and from port 4 to port 1. When energized, the spool shifts to allow flow from port 3 to port 4, and from port 2 to port 1. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.

APPLICATIONS
These spool-type valves are primarily used in mobile and industrial applications	Shown with Standard Coil,
for controlling the direction of the flow in a circuit, like motors or cylinders. Can	Deutsch Connector
be used in combination to duplicate a four-way, three-position valve, creating
an economical, compact function. Solenoid spool-type valves are direct acting
and respond quickly to coil voltage input. Spool valves will have some leakage
due to spool clearance, so if your application requires no leakage at the working
port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance
valve, etc., in addition to this solenoid valve. This valve can operate with an inlet
pressure of 315 bar on port 3 for 500,000 cycles. Port 1 is not intended for use

SPECIFICATIONS

Rated pressure*	230 bar [3300 psi]**
Rated flow at 7 bar	8 l/min
[100 psi]	[2 US gal/min]
Weight	0.32 kg [0.71 lb]
Cavity	SDC08-4
Standard Coil	M13 20 Watt
Robust Coil	R13 16 Watt
	Robust Nut P/N 173800539
	(no coil O-rings needed)

*Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

**See 315 bar pressure rating note on page 10.

SCHEMATIC

2

4

3

1

PERFORMANCE CURVES

Pressure drop

33 cSt [154 SUS] hyd.oil @ 38°C [100° F]

psi bar 406 28 348 24

290	20
				3 to 2 to 4 to 1
232	16
				De-Energized

174	12							3 to 4 to 2 to 1
116	8
								Energized
58	4
0	0
l/min	0	2	4	6	8	10	12	14	16	18

US gal/min	0.5	1.1	1.6	2.1	2.6	3.2	3.7	4.2	4.8

BC332375861112en-000101 • February 2020

SV - 153

Solenoid Valves Technical Information

4-Way, 2-Position Spool

SV08-24-01

	DIMENSIONS	Cross-sectional view
	mm [in]
	h20 mm	h24 mm
	t4-6 N·m	t35-40 N·m	3/4-16 UNF-2A
	[35-53 lbf·in]	[26-30 lbf·ft]

Standard Coil nut kit P/N 17380058

(coil O-rings included)

	4	3	2
COIL NOT SHOWN FOR CLARITY
INSTALL O-RING (2) PLCS AS SHOWN	2.5 [0.10]
59.8 [2.35]		53.8 [2.12]

1

Ø23.8 [0.94]

EXAMPLE CIRCUITS

ORDERING INFORMATION

BC332375861112en-000101 • February 2020

SV - 154