Danfoss Strongboard Tile and Laminate Data sheet

Data Sheet

Strongboard

Tile and Laminate

Application

Ordering

Board used for decoupling and load distribution
on SpeedUp for accepting tiles and laminate in a
combined process (buttering and floating).
Only for indoor applications.

Min. tile size .........................10 x 10 cm

Max. tile size ........................60 x 40 cm

Min. thickness (natural stone) ............10 mm

Tile size up to Grouting

30 x 30 cm min. 3 mm
40 x 40 cm min. 4 mm
40 x 60 cm min. 5 mm

Active load up to 2 kN/m², point load up to 2 kN.

Product Typ e Code no.
Strongboard tile and laminate FH-SBB 088X0115

Technical Data

Material Polyester fibre board of alu-clad polyester

fleece and thermoplastic binder on
styrolacrylate with high tensile and

compressive strength
Thickness 5 mm + 0.5 mm
Board format 1150 x 600 mm
Weight 5.2 kg/ m² + 5 %
Thermal conductivity 0.2 W/ mK
Moisture resistance Mould resistant
Water vapour diffusion resistance μ Approx. 30
Expansion coefficient 2.75 x 10-5 1/K
Expansion with exposure to temperature (100 h, 80° C) < 0.3
Expansion with water exposure (80 h, 23° C) < 0.5
Building classification according to EN 13501 E
Impact sound performance with ceramic top layer

(test-bed value according to ISO 140-8:1998)
Approved tile adhesive Mapei Elastorapid
Approved grout Mapei Ultracolor Plus
Coverage Max. 60 m² (length/width ratio, max. 2:1)
Waste key 170701

14 dB with SpeedUp

VDCRB302

© Danfoss | FHH | 2015.11 | 1

Accessories

Product Typ e Code no.

Joint tape strongboard 12 m

FH-SBF 088X0120

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: [phone] • Fax: [phone]
[e-mail] • www.floorheating.danfoss.com

Danfoss ca n accept no respons ibility for pos sible errors in ca talogues, bro chures and other pr inted material. Da nfoss reserve s the right to alter its p roducts with out notice. This als o applies to produ cts
already o n order provided t hat such alteratio ns can be made with out subsequenti al changes being n ecessary in sp ecifications alr eady agreed.
All trade marks in this mate rial are proper ty of the respec tive companies . Danfoss and the Danf oss logotyp e are trademark s of Danfoss A/S. Al l rights reserv ed.

2 | © Danfoss | Danfoss | FHH | 2015.11

VDCRB302