Danfoss SpeedUp Heat Panels Data sheet

Data Sheet

SpeedUp Heat Panels

Application

SpeedUp heat panel CZ SpeedUp heat panel EZ

SpeedUp header panel CZ SpeedUp header panel CO SpeedUp blank panel BP

The SpeedUp heat panel is part of a universal and optimum underﬂoor heating system for all new and old buildings. It is suitable for renovation, extensions and use in dry installation. The Danfoss 16 x 2 mm composite pipe laid into the Danfoss SpeedUp heat panels at laying

Maximum value for surface roughness in mm with measuring distances in m

Line Reference 0.1 m 1 m 4 m 10 m 15 m

Prepared ﬂoors with extra requirements,

e.g. with uneven ﬁller

distances of between 125 mm and 250 mm allows for a tailored output. The composite pipe is fastened and ﬁxed into the specially formed pipe channels (Ω-shaped) of the prefabricated aluminium clad heating slats.

1 mm 3 mm 9 mm 12 mm 15 mm

SpeedUp aluminium header panel

EZ (accessory)

Ordering

VDCRA702

Product Typ e Dimensions (L x W x H) Code no.

SpeedUp heat panel comfort zone, CZ FH-SA 1000 x 500 x 30 mm 088X0100

SpeedUp heat panel edge zone, EZ FH-SB 1000 x 500 x 30 mm 088X0101

SpeedUp header panel, CZ FH-SC 250 x 500 x 30 mm 088X0102

SpeedUp header panel, EZ FH-SD 250 x 500 x 30 mm 088X0103

SpeedUp header panel, CO FH-SE 250 x 375 x 30 mm 088X0104

SpeedUp blank panel, BP FH-SF 1000 x 500 x 30 mm 088X0105

Materials

Base EPS Polystyrene 035 DEO; 240kPa

SpeedUp heat panel Aluminium 0.5 mm, with pipe channels (Ω-shaped), crimped

Thermal conductivity 0.035 W/mK

Thermal resistance (R) 0.86 m2 K/W

Water vapour diﬀusion factor 40 according to DIN EN 12086

Flexibility (N/mm2) < 0.4 according to DIN EN 12089

Compressive strength 240 kPa at 10 % compression according to DIN EN 826

Building classiﬁcation E (according to EN 13501)

Accessories

Product Typ e Dimensions (L x W x H) Code no.

SpeedUp aluminium heating plate FH-SI 495 mm x 242 mm x 0.5 mm 088X0110

SpeedUp load bearing steel FH-SJ 800 mm x 200 mm x 1 mm 088X0111

SpeedUp alu. header panel CZ FH-SDA 250 mm x 500 mm x 30 mm 088X0112

SpeedUp alu. header panel EZ FH-SDB 250 mm x 500 mm x 30 mm 088X0113

SpeedUp perimeter insulation FH-SK 50 m x 100 mm x 8 mm 088X0122

System foil FH-SL 50 m x 1 m x 0.2 mm 088X0130

Support batten FH-SFE 1000 mm x 45 mm x 30 mm 088X0134

Threshold support batten FH-SFF 250 mm x 45 mm x 30 mm 088X0135

Support batten, EPS FH-SFG 800 mm x 45 mm x 30 mm 088X0136

Hot wire cutter (230 V, 60 W) FH-TOM - 088X0612

Note on HBCD

This product contains a substance included on the candidate list according to article 59 (1,10) of regulation EC No. 1907/2006 (‘REACH’) in a concentration above 0.1% w/w: ﬂameprooﬁng agent, hexabromocyclododecane. HBCD is also present on the Annex 14 list.

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501 heating@danfoss.com • www.ﬂoorheating.danfoss.com

Danfoss ca n accept no respons ibility for pos sible errors in ca talogues, bro chures and other pr inted material. Da nfoss reserve s the right to alter its p roducts with out notice. This als o applies to produ cts already o n order provided t hat such alteratio ns can be made with out subsequenti al changes being n ecessary in sp eciﬁcations alr eady agreed. All trade marks in this mate rial are proper ty of the respec tive companies . Danfoss and the Danf oss logotyp e are trademark s of Danfoss A/S. Al l rights reserv ed.

VDCRA702