Danfoss SonoHCA Fact sheet

Fact Sheet
SonoHCA
Electronic heat cost allocators
SonoHCA heat cost allocators offers maximum flexibility for parametrisation, significantly simplifies the installation and setup process and improves consumption data monitoring. SonoHCA uses Wireless M-Bus to relay data. With their precision and their easy-to-read design, Danfoss heat cost allocators guarantee the highly reliable transmission of energy consumption data, which can be relayed in several different ways.
Innovations
• Wireless M-Bus communication
• Automatic activation when installed on rail
• Remote sensor plug-in device available
• Password protection for parametrisation
• AES-128 encryption for secure data transmission
• Increased measuring range
• Cumulative record of frauds
• Up to 15 scrolling values can be displayed on the LCD
• Up to 144 monthly readings and 18 fortnightly readings saved
• 18 monthly maximum radiator temperature readings saved
Features
• Two-sensor measurement method
• Unit or product scale, to be defined according to the billing method
• Meets EN 834:2013
• User-friendly operation by push button
• Optical interface for readout and parametrisation
• Several software tools available
• Peel-off barcode sticker for easy device registration
• Lithium battery with a typical lifespan of 10 + 1 years
• Made in Switzerland
• Display
• Unidirectional radio communication Wireless M-Bus (868.95 MHz)
Parametrisation
A software enables you to parametrise SonoHCA allocators with up to 45 different parameters via a standardised optical interface. Only authorised users can modify these settings. In order to protect your devices from frauds, both the allocators and the software have a password function. The factory-set “Installer” password can be changed for all heat cost allocators. Parametrisation prior to delivery greatly simplifies product handling.
www.danfoss.com
Danfos produc Al
Danfoss A/S
Heating Segment • heating
Readout LCD
The SonoHCA heat cost allocators have a multi-purpose LCD display. The full display is shown below:
88
888888
Display with all elements illuminated
SonoHCA allocators are supplied with the LCD display switched off. Allocators can be supplied with a continuous switched on display on request.
Optical interface
In accordance with the M-Bus format (EN 13757-3), the standardised optical interface enables consumption data and saved parameters to be relayed directly to a PC. This data and these parameters may be viewed and parametrised using the optical interface and a software.
Wireless M-Bus radio
The Wireless M-Bus radio communication interface enables data readout using Wireless M-Bus radio protocol (EN 13757-4) and complies with open metering system (OMS) specifications version V3.0.1. The SonoHCA uses unidirectional radio technology and transmits the consumption data and saved parameters every 120 seconds for short (OMS) or long (walk-by) telegrams.
The SonoHCA’s radio readout can be set to the following time periods:
• Short telegram (OMS): 24 hours a day, 7 days a week
• Long telegram (walk-by): < 12 hours a day, 7 days a week
Dimensions
Technical specifications
Measurement method Two-sensor Scale Unit or product scale Power supply 3 V lithium battery Typical lifespan 10 + 1 years Display LCD Display size 6 digits (000000–999999) Interface Optical interface compliant with EN 60870-5 Storage temperature -25–70 °C
Use
Radiator power 4–16,000 W
Measuring range
T
min
T
max
Measurement start Parametrisable Set day Parametrisable
0–105 °C 0–120 °C (remote sensor)
35 °C
105 °C 120 °C (remote sensor)
Standards
Standard EN 834:2013 Certification HKVO A1.02.2015 CE compliance Compliant with Directive 2014/53/EU (RED)
Wireless M-Bus radio communication
Frequency 868.95 MHz Communication Unidirectional Protocol Wireless M-Bus Encryption AES-128 Transmission standard EN 13757-4, mode T1
Broadcasting interval
Data transmission periods
Short telegram (OMS): > 120 s Long telegram (walk-by): > 120 s
Short telegram (OMS): 24 hours a day, 7 days a week Long telegram (walk-by): < 12 hours a day, 7 days a week
.danfoss.com • +45 7488 2222 • E-Mail: heating@danfoss.com
s can accept no responsibility for possible errors in catalogues, brochures and o ther printed material. Danfoss reserves the right to alter its products w ithout notice. This also applies to ts already on order provided that such alterations can be m ade without subsequential changes being necessary in specications already agreed.
l trademarks in this material are p roperty of the respective companies. Danfoss and all D anfoss logotypes are trademarks of Danfoss A/S. All rights reserve d.
© Danfoss | Energy Metering | 2019.05 VL.SH.B1.02
Loading...