Danfoss SonoCollect 210, SonoCollect 211 Fact sheet

Fact Sheet
SonoCollect 210/211
Data concentrator for smart metering
Application
The SonoCollect 210/211 is a radio concentrator designed to remotely read out wM-Bus and OMS devices (868 MHz).
Installed permanently in the building, the SonoCollect 210/211 receives, stores, and uploads the received radio data to a FTP server via an integrated GSM / UMTS modem.
Features
• 868 MHz transceiver.
• Autonomous remote readout system for wM-Bus and OMS devices.
• Operating modes T1, T2, and C1 according to EN 13757-4.
• FTP upload via the integrated GSM / UMTS modem.
• Power supply with on-site replaceable lithium battery pack.
• Data backup in case of power supply breakdown.
• Easy configuration thanks to its SonoReCon software.
• Configuration and readout software included (English, French, Italian and German).
• Software for interpretation of uploaded FTP files included.
• Protection class IP 65.
Types
Order code Model
088H2441 SonoCollect 210 Battery GSM / UMTS USB
088H2442 SonoCollect 211 Mains GSM / UMTS USB
Power
supply
Modem
Configuration
interface
Function
The data concentrator SonoCollect 210/211 is a radio transceiver for consumption meters (heat, water, electricity and gas) operating in modes T1, T2 and C1, according to EN13757-4.
The SonoCollect 210/211 receives the radio telegrams from the consumption meters, 7 days a week, 365 days a year, and stores them in its internal non-volatile memory of 16 MB (up to 58’000 telegrams).
According to the configuration, the stored radio telegrams are sent via an internet connection to a FTP server.
www.danfoss.com
Danfos produc Al
Danfoss A/S
Heating Segment • heating
Configuration
Before or during commissioning, the SonoCollect 210/211 has to be configured using its USB interface and the SonoReCon software.
All relevant parameters like SIM card parameters, FTP server and radio reception parameters have to be set. In addition, the following parameters are available:
• FTP server configuration (SIM-PIN, APN,
• Radio reading and FTP upload settings
• Authorized / blocked manufacturers and device types
• Remote configuration
• Etc.
Connectivity
• Password protection
• Up to 6 global keys (AES-128)
• List of meter specific radio keys (AES-128)
• FTP file deciphering key
• Device state (time, temperature, housing, device, battery, and report)
• Device meter list
• Received meter list (meters, telgr. Mode T, telegr. Mode C, bit errors, and CRC errors)
• GSM / UMTS network information and signal strength
• General settings (device name, device text, password, set time, etc.)
Technical specifications
Operating temperature -20 to 60 °C Storage temperature -30 to 70 °C (dry environment)
Dimensions
Weight
Protection class IP 65 Mounting Wall mounting using up to 6 screws
Standards
Directives / norms
CE conformity According to 2014/53/EU (RED)
Interfaces
GSM operating modes GPRS, EDGE, UMTS / HSPA+ Configuration USB 2.0
Radio communication
Communication Unidirectional Frequency 868.95 MHz Operating modes T1, T2, C1 according to EN13757-4 Radio protocol wM-Bus / OMS Reception time Configurable from 1 min to 24 h
Power supply
Mains (SonoCollect 211) 110 - 230 VAC, 50 - 60 Hz Battery (SonoCollect 210) Lithium battery pack
Note
195 x 130 x 46 mm (SonoCollect 211) 195 x 130 x 170 mm (SonoCollect 210)
640 g (SonoCollect 211) 830 g (SonoCollect 210)
RED Directive 2014/53/EU
• EN 300 220-2 V3.1.1
• EN 300 328 V2.1.1
• EN 301 489-1 V2.1.1
• EN 301 489-3 V2.1.1
• EN 301 489-17 V3.1.1 RoHS Directive 2011/65/EU
• EN 50581:2013-02
The lifetime of the battery pack depends on the number of meters present on site, the configured recep­tion time, the number of FTP uploads, the quality of the network and the operating temperature.
user, password, FTP server, etc.)
GMS / UMTS modem
- SIM card holder
Configuration interface
- USB
.danfoss.com • +45 7488 2222 • E-Mail: heating@danfoss.com
s can accept no responsibility for possible errors in catalogues, brochures and o ther printed material. Danfoss reserves the right to alter its products w ithout notice. This also applies to ts already on order provided that such alterations can be m ade without subsequential changes being necessary in specications already agreed.
l trademarks in this material are p roperty of the respective companies. Danfoss and all Danfoss l ogotypes are trademarks of Danfoss A/S. All rights reserve d.
© Danfoss | Energy Metering | 2019.02 AM309939824749en-000102
Loading...