Danfoss SonoCollect 110 Fact sheet

Product Sheet

SonoCollect 110™
Compact and integral

Smart Metering is easy and intuitive: the SonoCollect 110™ aban­dons extensive configuration and various number of additional
hardware. SonoCollect 110™ is a consolidated device which fulfills
all duties and responsibilities of Smart Metering. Real Plug’n’Play
saves time and effort.

Complete functionality

As gateway for Smart Metering, SonoCollect 110™ comes with a
standardized M-Bus lnterface which supports up to 80 slaves.
In addition there are four S0 pulse inputs to connect further meters.
Furthermore the Wireless M-Bus is offering a new technology
compliant to the OMS. Therefore you can use SonoCollect 110™ in
all present and prospective infrastructures to capture consumption
data.
Beyond that, SonoCollect 110™ provides an RS-232/485 serial inter­face for other meters.
In order to connect SonoCollect 110™ to your remote metering
systems there are an Ethernet interface as well as GSM. You are
free to choose the appropriate one for your system.
Determine the way of connection and insert SonoCollect 110™ into
your network.

Connection to management systems

SonoCollect 110™ supports XML and SML. Through this features,
it is prepared for the connection with your back-end system
to facilitate remote meter reading or energy data management.
Updates and configurations can be done remotely by the server
system. An easy way of maintenance is assured. SonoCollect 110™
offers all essential attributes for intelligent Smart Metering.

Participation of the customer

In daily life the awareness of the environment plays an important
role. A client website of the utility supplier offers the customer the
possibility of up-to-date information about the consumption at
any time. Thanks to an integrated web server, SonoCollect 110™
provides an additional offline front-end. The customer can directly
access the consumption data without internet access. A simple
internet browser can be used to connect to SonoCollect 110™.
The easy to use website presents the consumption data and some
statistics of all connected meters.

Smart Metering - start now!

Change now and use the new technology for an easy administration
of your power and energy network. Offer your clients the possibility
to keep an eye on their own energy balance.
Thanks to the support of 1Pv6 SonoCollect 110™ can be used in
future networks.
SonoCollect 110™, the compact and integral Controller, makes
Smart Metering feasible for you.

SonoEnergy

WAN

LAN

WAN (Ethernet or GPRS)

Consolidated design

SonoCollect 110™ is a multifunctional and very compact controller.
With a width of only 4 modular units it is able to fulfill the require­ments of the FNN specifications and also of many utility suppliers
right now.
Additionally the power supply unit is integrated into SonoCollect
110™. External power supply units belong to the past, connect
SonoCollect 110™ directly to the mains voltage. This offers you
extra space and no additional installation costs.

VLIGA102

S0, RS-232 or RS-485

M-Bus

OMS

Wireless M-Bus

© Danfoss | Energy Meters | 2016.06 | 1

Ordering

Model M-Bus wM-Bus (OMS) Ethernet GSM/GPRS Code no.

SonoCollect 110 E-M-80 X X 014U160 0

SonoCollect 110 E-WM-80 X X X 014U1601

SonoCollect 110 G-M-80 X X X 014U1610

SonoCollect 110 G-WM-80 X X X X 014U 1611

Technical specifications, General

Power supply 90 - 260 VAC, 50 Hz, screw terminals, integrated power supply

Power consumption < 3 W (idle state), max. 10 W (GPRS communication + 60 metres)

Housing dimensions 4 modular units, 72 x 91 x 62 (W x H x D in mm)

Installation DIN rail

Protection class IP 20

Temperature range 0 - 50° C

Humidity 10 - 95% relatively, no condensation

Integrated web server Yes

Memory for local data storage ≥ 2 GB

Firmware update Yes, directly or via WAN (Internet)

Configuration via WAN (Internet) Yes, complete remote control via WAN

Technical specifications, Metering

OMS compliant Interface Yes, optional, AES encryption

Wireless M-Bus Interface Yes, AES encryption, auto-scan, Mode: S, T, C

M-Bus Interface Yes, up to 80 participants, auto-scan, compliant to EN 13757

Conformity to SML Yes

Serial interface Yes, RS-232 or RS-485 (switchable), RJ45, IEC 62056-21

S0 pulse inputs Yes, 4 channels, screw terminals, IEC 62053-31

Technical specifications, Communication

Ethernet interface Yes, 100 MB, RJ45, support of IPv6 and IPsec (VPN)

GSM/GPRS module Yes, optional, external antenna via SMA-Connector, slot for Mini-SIM

WAN connection to server system (push) TCP/HTTP connection (XML), optionally extensible

Encryption WAN (server communication) SSL (server- and client-side certification), OpenVPN

E-Mail transmission (push) XML data, CSV data optional

FTP transfer (push, pull) CSV data

Plug'n'Play Prepared for SonoEnergy™ - Smart Metering

Fallback-Routing (alternative connection in case of an incident) Yes, indication of further servers and communication paths

Danfoss A/S

Energy Meters • Ulvehavevej 61 • DK-7100 Vejle • Denmark
Phone: [phone] • Fax: [phone]
[e-mail] • www.heating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | Energy Meters | 2016.06

VLIGA102