Danfoss SGP X, SGP I, SGP N, SGP RX, SGP RI Installation guide
...
Installation guide
Danfoss
14-47.15
Danfoss
Dr
Sight glass
Type SGP X, SGP I, SGP N, SGP RX, SGP RI, SGP RN, SGR, SG, SGN, SGRN
Refrigerant:
014R9572
Applicabl e to A1, A2, A2L and A3 refrigerants as a ccepted by Danfoss, excludin g R717 and to non-corrosive gases /liquids
depende nt on sealing material compat ibility. The design pressure sh all not be less than the value ou tlined in section 9.2 of
ANSI/ ASHRAE 15 for the refri gerant used in the system.
For a complete list o f approved refrigerants , visit http://store.danfoss.com/ and search fo r individual code
numbers, w here refrigerants are liste d as part of product deta ils.
For the application use with R744 as part of a secondary loop or cascade system should refer to the
datasheet for more attentions.
014R9572
Media temperature: T
T
Green
Grün
Vert
Verde
Verde
綠色
Verde
зеленый
: -50 °C / -58 °F
min.
: +80 °C / +175 °F
max.
Yellow
Gelb
Jaune
Amarillo
Giallo
黄色
Amarelo
желтый
Type W W
mm in. mm in.
SGP/SG flare 6
SGP/SG flare 10
SGP/SG flare 12
SGP/SG flare 16
SGP/SG flare 19
14
19
22
27 11/
32 11/
9
/
16
16
3
/
22
4
7
/
24
8
27 11/
16
32 11/
4
Danfoss
14-50.15
Max. working Pressure (PS / MWP): SGP: 52 bar / 754 psig
SG: 35 bar / 508 psig
Danfoss
14-210
y N
2
5
/
8
7
/
8
15
/
16
16
4
Max. 80 °C / 175 °F
d>22 mm – 7/8 in.
SGP/SG socket max. torque
100 N m / 74 ft-lbs
Danfoss
14-67.15
14-125.12
Min. 5% Ag
Size Nm ft-lbs
1
/4 in / 6 mm
3
/8 in / 10 mm
1
/2 in / 12 mm
5
/8 in / 16 mm
3
/4 in / 19 mm
© Danfoss | DSC (Nb) | 2020.06
Max. torque
20 15
30 22
60 44
100 74
200 148
With gasket max. torque
50 Nm / 37 ft-lbs
Hex 27 mm / 11/16 in
Hex 32 mm / 11/4 in
AN220886434888en-001001 | 1
Sight glass type SGP X, SGP I, SGP N, SGP RX, SGP RI, SGP RN, SGR, SGI, SGN, SGRN
SGP flare/face seal/socket connections are only approved
for A1 and A2L refrigerants.
All Danfoss products fulfill the requirements in REACH.
One of the obligations in REACH is to inform customers
about presence of Candidate list substances if any, we
hereby inform you about one substance on the candidate
list:
A moisture indicator in a sight glass contains a paper
which is impregnated with Cobalt Dichloride
(CAS no: 7646-79-9) in a concentration above 0.1% w/w.
If the valve has been damaged or dismantled:
- Avoid skin contact with the paper
- Do not inhale the dust from the paper
- The paper must be disposed as hazardous waste
SGP 螺纹/面密封/套口型仅能用于丹佛斯已验证的A1和
A2L制冷剂。
所有丹佛斯产品都符合REACH的要求。
REACH中的义务之一是通知客户关于候选清单上物质
的存在，因此我们特此通知您关于在候选名单上的一个
物质:
视液镜中的湿度指示器含有浸着二氯化钴的试纸
(CAS 号:7646-79-9)，其浓度质量比大于0.1%。
如果阀被损坏或拆卸时：
- 避免皮肤与试纸接触
- 不要吸入试纸上的粉尘
- 试纸必须作为危险废物处置
© Danfoss | DSC (Nb) | 2020.06
AN220886434888en-001001 | 2
Loading...