Danfoss SC-CNX Installation guide
COMPRESSORS
Technical info
CT.30.V1.02, May 2003
SC-CNX / Starting Relay
Now approved for use with flammable gas
All SC-CNX compressors for use with flammable refrigerant R290
are now equipped with a VDE approved gas tight potential relay
useable for hydrocarbon applications according to EN/IEC
60335-2-24.
Hereby it is no longer necessary to place the starting device
outside the compressor compartment.
The new approved potential relay is white (nature) in colour,
where the old one was black.
Code number printed on the potential relay
&rosserpmoC
gnisnednoC
epyTtinu
XNC01CS 5608H401
XNC21CS 5628H401
XNC51CS 5658H401
rosserpmoC
.onedoC
yaleR
SAW
.onedoC
)kcalb(
ro9937-711
5247-711
ro9937-711
5247-711
ro2247-711
6247-711
yaleR
EBLLIW
.onedoC
)etihw(
5247-711
5247-711
6247-711
Starting Device
Kit
XNC81CS 5688H401 9247-711
9247-711
Code number of starting device
rosserpmoC.onedoC
SAWtiK/eciveDgnitratSEBLLIWtiK/eciveDgnitratS
epyT.onedoCepyT.onedoC
XNC01CS 5608H401
XNC21CS 5628H401
XNC51CS 5658H401
XNC81CS 5688H401
Please also visit our web site:
*mm074 **1107-711 *mm074
*mm0001 **4107-711 *mm0001
tiK **9179-711 tiK
*mm074 **1107-711 *mm074
*mm0001 **4107-711 *mm0001
tiK **9179-711 tiK
*mm074 **2107-711 *mm074
tiK **1179-711 tiK
*mm074 **4307-711 *mm074
tiK **8179-711 tiK
* starting device - cable version
** relay = black
***relay = white
***9407-711
***4107-711
***9179-711
***9407-711
***4107-711
***9179-711
***1507-711
***1179-711
***4307-711
***8179-711
www.danfoss.com/compressors
and have a look at our complete product range covering all your present and future applications,
news and literature.
Danfoss Compressors GmbH
REFRIGERATION
AND AIR CONDITIONING
Mads Clausen Str. 7
D-24939 Flensburg / Germany
Phone +49 461 4941 0
www.danfoss.com/compressors
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved
Loading...