Danfoss RTW-R, RTW-K Data sheet [de]

Data Sheet

10 14 18 22 26 30 °C

0  1 2 3 4 5

8 12 16 20 24 28 °C

••••••

Thermostatic Radiator Sensor RTW

Application

Data and Ordering

Setting the Temperature

RTW is a self-actuating proportional controller
with a small P-band.
RTW radiator thermostats can be used for all
central and district heating systems.
RTW sensors incorporate a “Frost Protection
Setting”

Type Version Setting range Code No.

RTW-R Single Pack 8-28 °C 013G7100

RTW-K Single Pack 8-28 °C 013G 7101

The design is particularly robust, with both End­Stop strength limits and sensor bending force
limits being above the requirements of the
European Standard EN 215.

= Frost protection setting
Positive shut o

© Danfoss HS | 10/2015 | VD31F423 1

The required room temperature is set by turning
the setting dial. The temperature scales show the
correlation between scale values and the room
temperature. The temperature values stated are
for guidance only as the obtained room
temperature will often be inuenced by
installation conditions.

The temperature scales are stated according to
European standards at Xp = 2°C. This means that
the radiator thermostats close at a sensor
temperature which is 2°C higher than stated on
the temperature scales.

Datasheet Thermostatic Radiator Sensor RTW

Mounting

Danfoss A/S
Heating Segment
Haarupvaenget 11
8600 Silkeborg
Denmark
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.heating.danfoss.com

2 © Danfoss HS | 10/2015 | VD31F423