Danfoss RTW, RLV-KS Installation guide

(Angle)
(Straight)
S
I
Nb. Use Image to match the packaging
O
N
A
Needs RA tting
RTW-RA Radiator Thermostat
HOME thermostat set
RTW & RLV-KS
Q
U
H
A
S
I
L
N
I
T
A
Y
D
.
E
D
É
.
D
Ä
N
I
S
C
H
E
Q
T
I
U
L
A
A
L
U
I
T
Ä
Q
.
T
What is a thermostatic radiator valve (TRV)?
TRVs sense the air temperature around them and regulate the ow of water through the radiator which they are tted to.
They should be set at a level that gives you the room temperature you want. These settings may have to be dierent in each room, and you should set the TRVs to suit each room and then leave them to do their job. As guide to the temperatures is shown on the right.
Turning a TRV to a higher setting will not make the room heat up any faster. How quickly the room heats up depends on the boiler size and setting, and the radiator size. Turning a TRV to a lower set­ting will result in the room being controlled at a lower temperature, and saves energy.
Set and Forget
The thermostat maintains a constant temperature in your room, set your preferred room temperature according to the thermometer below and that’s it. The thermostat will open and close depending on the heat demand thereby utilizing the free heat from sunlight, appliances and people.
Additional heat saves energy
Sunlight, kitchen appliances and electric light give o additional heat. The thermostat registers such additional heat by automatical­ly closing down. When there no longer is enough additional heat available, the thermostat automatically opens again.
* Frost Protection
If you leave your home for a longer period of time, you can safely turn the thermostat to *. At this setting, the temperature will keep the room temperature at about 7-8 0C.
Night Setback
To save energy, simply lower the room temperature at night or at times when nobody is at home.
Cleaning
The radiator thermostat can be cleaned with mild detergents such as dish washing liquid. Do not use scourers, alcohol, solvents or bleaching agents as they can damage the radiator thermostat.
5
4
3
2
1
28°
24°
20°
16°
12°
MAX.
Please do not cover the thermostat!
The thermostat must be able to register the temperature of the room. If it is covered by e.g. thick curtains or furniture, use a ther­mostat with remote sensor.
MIN.
Installation Guide
A
Easy Installation
Scan for video guide
Fitting the H-piece valve: Radiator with bottom connection
1 2
Firstly, remove the two brass inserts from the valve body.
Fit the valve body to the ow and return pipework.
3
Connect the H-piece to the copper inserts and tighten the union nuts.
Screw both of the removed brass inserts into the radiator and tighten with a 10 mm Allen key.
4
Once installed take o the lock shield cover. Ensure the RLV is open using a 8mm Allen key, then put the cover back on.
Loading...
+ 1 hidden pages