Danfoss RET230 C01, RET230 C03 Data sheet
Datasheet
RET230 Electronic Room Thermostats with Function Switches
Features
RET230 C01 |
RET230 C03 |
•Wide range of application options
•Compact design
•Electronic accuracy
•Wallplate construction
•LED status indicators
This range of thermostats is aimed primarily at the heating and air conditioning market, where there is a demand for enhanced functionality. All models feature different combinations of supplementary function switches which are accessible to the user.
RET230 LS: This thermostat, which can be used in either heating or cooling systems, incorporates a manual switch which allows the thermostat output to be switched off.
RET230 C3: Designed for use with cooling only fan coil units, the RET230 C3 incorporates a combined system isolation switch and Fan Auto/Fan Continuous switch. The latter allows the user to decide if the fan should run continuously or only when there is a demand for cooling. A second three position switch allows the user to select one of three fan speed settings.
RET230 C02: Designed for use in two-pipe changeover fan coil unit systems, the RET230 C02 incorporates a manual Heating/Cooling (Winter/Summer) switch which allows the thermostat to operate as a cooling thermostat in the summer and a heating thermostat in the winter. A second two position switch allows the user to turn the thermostat output off if so desired.
RET230C03: Designed for use in two-pipe changeover fan coil unit systems, the RET230 C03 incorporates a manual Heating/Off/ Cooling (Winter/Off/Summer) switch which allows the thermostat to operate as a cooling thermostat in the summer and a heating thermostat in the winter. A second three position switch allows the user to select one of three fan speed settings.
© Danfoss HS | 09/2015 | 284v12 VDRKI202 |
1 |
Datasheet |
RET230 Electronic Room Thermostat with Switches |
Specifications
ErP Class
Dimensions
Thermostat for use in systems having central changeover from heating to cooling
RET230 Electronic Thermostats with function switches |
RET230C02 |
|
RET230C03 |
Order Codes |
087N702200 |
|
087N703200 |
Heating/Cooling thermostat for changeover systems |
• |
|
• |
System Off/Auto Selector |
• |
|
|
Summer/Off/Winter (Heating/Off/Cooling) selector |
|
|
• (1) |
Summer/Winter (Heating/Cooling) selector |
• |
|
|
3 speed fan switch output terminals |
|
|
• |
Single speed fan output terminal |
• |
|
|
Switching Differential |
|
<1K |
|
Operating Voltage |
220/240 Vac, 50/60 Hz |
||
Switch Rating |
|
2 (1) A |
|
Temperature Range |
|
5-30°C |
|
Dimensions (mm) |
85 wide x 87 high x 42 deep |
||
(1) Switch label based on symbols |
|
|
|
Thermostat for use in non-changeover systems
RET230 Electronic Thermostats with function switches |
|
RET230C3 |
|
RET230LS |
Order Codes |
|
087N702300 |
|
087N700700 |
Cooling thermostat |
|
• |
|
|
Heating or Cooling thermostat |
|
|
|
• (2) |
Fan Auto/Continuous switch with system Off selector |
|
• |
|
|
System Off/Auto selector |
|
|
|
• |
Power On and thermostat calling LEDs |
|
• |
|
• |
3 speed fan switch output terminals |
|
• |
|
|
Switching Differential |
|
|
<1K |
|
Operating Voltage |
|
220/240 Vac, 50/60 Hz |
||
Switch Rating |
|
|
2 (1) A |
|
Temperature Range |
|
|
5-30°C |
|
Dimensions (mm) |
|
85 wide x 87 high x 42 deep |
||
(2) RET230LS has SPDT contacts and can be used in heating or cooling systems |
|
|
|
|
ERP Class
The products represented within this document are classified according to, and allow completion of, the Energy Related Product (ErP) Directive System Package fiche and the ErP system data label. ErP Labelling obligation is applicable from 26th September 2015.
ErP Class |
Product Function and ErP Description |
Additional efficiency gain |
|
|
|
|
|
I |
On/Off Room Thermostat |
1% |
|
A room thermostat that controls the on/off operation of a heater. |
|||
|
|
||
|
|
|
ErP
Product 1
Class
3
87 78
85 |
|
42 |
2 |
© Danfoss HS | 09/2015 | 284v12 VDRKI202 |
Loading...