Danfoss R13 B Data sheet

Data Sheet

Remote Control

R13 B Receiver

The R13 B receiver is highly customizable with many
features and mounting kits to ensure reliable and safe
operation in potentially dangerous applications.

Features

•

Multiband Radio with Full-Duplex
communication

•

External LEDs for troubleshooting

•

Highly field-customizable

•

External removable EEPROM SIM
module

•

STOP: PLd, Category 3 according to EN
ISO 13849-1:2008

•

Multi-feedback capability

•

13 digital outputs

Benefits

•

Easy and fast maintenance

•

Frequency management against
interferences

•

Suitable for all common proportional
valves

Applications

Industrial lifting and automation

Comprehensive technical literature is
online at www.danfoss.com

©

Danfoss | February 2022 AI299271810168en-000301 | 1

Technical data

Description Value

Stop function (400-900 MHz) Cat. 3-PLd
Ingress Protection rating IP65/NEMA4
Frequency band 433.050 to 434.040 MHz; ERP<1 mW

434.040 to 434.790 MHz; ERP<10mW

869.700 to 870.000 MHz; ERP<5 mW

902.000 to 928.000 MHz; ERP<1mW
Range Line of Sight (guaranteed) 100m
AC power supply 48 – 240 Vac / 18 – 30 Vac (700mA)
DC power supply 8 – 36 Vdc (2A)
Antenna Internal
Removable EEPROM External
Signalling External
STOP Output (400-900MHz) 1 (6A)
Start Output 1 (8A)
Safety Relay 1 (8A)
ON/OFF outputs 13 (8A)
Proportional Outputs N/A
CAN Bus Protocols N/A
ON/OFF inputs 4
Proportional inputs 1
Response Time 100ms
Maximum Total output current 8A
Operating Temperature Range -20 °C to 70 °C (-4 °F to 158 °F)
Storage Temperature Range (24h) -25ºC to 75ºC (-13ºF to 167ºF)
Storage Temperature Range (long periods) -25ºC to 55ºC (-13ºF to 131ºF)
Relative Humidity max. 95% without condensation
Weight 1350 grams
Dimensions (LxWxH mm) 245x160x80
Cable connection N/A
Associated transmitters (400-900 MHz) Ikargo1, Ikargo2, T70/1, T70/2, T70/1 ATEX, T70/2 ATEX, IK2, IK3, IK4

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | February 2022 AI299271810168en-000301