Danfoss R11 Data sheet

Data Sheet

Remote Control

R11 Receiver

The R11 receiver is highly customizable with many features and mounting kits to ensure reliable and safe operation in potentially dangerous applications.

Features

•Removable EEPROM SIM module

•Frequency management against interferences

•STOP: PLe, Category 4

•11 digital outputs

2.4GHz

•Radio with full-duplex communication

Benefits

•	Easy and fast maintenance
Applications
•	Standard EOT cranes

Comprehensive technical literature is online at www.danfoss.com

AI299271373167en-000401 | 1

Technical data

Specification	Value
Stop function (2.4 GHz)	Cat. 4-PLe

Ingress protection	IP65/NEMA4

Frequency band - ERP	2405MHz to 2475MHz 20dBm/100mW

Range Line of sight (guaranteed)	100m

AC power supply	48 - 240 Vac / 18 - 30 Vac (500mA)

DC power supply	8 - 36 Vdc (2A)

Antenna	Internal

Removable EEPROM	Internal

Signaling	Internal

STOP Outputs (2.4GHz)	2 (6A)

Start Output	1 (8A)

Safety Relay	1 (8A)

ON/OFF outputs	11 (8A)

Proportional Outputs	N/A

CAN Bus Protocols	N/A

ON/OFF inputs	N/A

Proportional inputs	N/A

Maximum Total Output Current	8A

Response Time	100ms

Operating Temperature Range	-20°C to +70°C (-4°F to +158°F)

Storage Temperature Range (24h)	-25ºC to 75ºC (-13ºF to 167ºF)

Storage Temperature Range (long periods)	-25ºC to 55ºC (-13ºF to 131ºF)

Relative Humidity	max. 95% without condensation

Weight	800 grams

Dimensions	164x210x60 mm

Tether Connector	N/A

Associated transmitters (2.4 GHz)	Ikore, IkoreB, Ikompact, IK2, IK3, IK4

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.

AI299271373167en-000401