Data Sheet
Electrohydraulic Actuator
PVED-CX
The extensive PVG 32 product line now includes a
PVED-CX digital actuator to ensure entrance into the
SIL 2 and CANopen world.
The PVED-CX helps OEM to reach a high performance level while facilitating compliance with the safety demands of Machinery Directive 2006/42/EC.
Target applications are cranes, man lifts, telehandlers and special purpose vehicles.
The CANopen protocol is designed for proportional valve controls and can be used in any application.
Features
•SIL 2 certified according to IEC 61508 by TÜV Süd
•CANopen protocol (CiA 3.01 and CiA 4.08)
•ASSIST (Automatic System Safety Integrity Self Test) feature for Autonomous self-verifying safety system
•High precision valve control
•Low energy consumption
Comprehensive technical literature online at powersolutions.danfoss.com
© Danfoss | Jul 2016 |
L1022909 | AI00000109en-US0202 | 1 |
The PVED-CX: a cornerstone in the Danfoss Safety Concept
All our know-how is channeled into the electronic, software, and mechanics of the PVED-CX. The PVED-CX is designed for optimum reliability and safety – the result of an innovative and very thorough development process.
The PVED-CX is SIL 2 certified according to IEC 61508 by TÜV Süd.
Control and safety principles for PVED-CX
|
Vbat3 |
|
|
|
|
|
|
|
Vbat2 out |
Safety |
|
|
|
|
|
|
Vbat2 in |
|
|
|
|
|
|
|
switch |
|
|
|
|
|
|
<![if ! IE]> <![endif]>harness |
CAN |
|
Solenoid valve |
|
Solenoid valve |
|
|
<![if ! IE]> <![endif]>Cable |
|
|
enable |
Analogue |
Solenoid |
||
|
Controller |
|
control |
|
|||
LVDT in |
Spool Set -point |
Control |
|
|
Valves |
||
|
|
|
|
|
|
|
|
|
from |
|
|
|
|
|
|
|
neighbor A |
|
|
Closed loop |
Pilot oil |
||
|
|
|
|
||||
|
|
|
|
pressure |
|||
|
LVDT out to neighbor B |
|
feed back |
build up |
|||
|
|
|
Spool position |
Position |
Mech linkage. |
|
Main Spool |
|
|
|
|
sensor |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
V310 207.A |
The safety approach of the PVED-CX is based on selfand neighbor-monitoring combined with the ability to shut down all neighbor modules. Spool movement, internal electronics, and software processes are redundantly monitored.
Our complete valve safety concept includes PVG with PVSK.
When using PVED-CX in combination with PVG with PVSK, oil flow is controlled locally by the PVSK. Oil flow to the application can be shut down by both PVSK and valve without influencing other functionality on the vehicle.
PVED-CX – supporting OEMs to meet the required Performance
Level.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | Jul 2016 |
L1022909 | AI00000109en-US0202 |