Danfoss PVED-CC Series 5 Data sheet

Data Sheet

Electrohydraulic Actuators

PVED series 5

A new generation of digitally controlled actuators is
now available for PVG 32 and 100. The PVED-CC Series
5 is based on the hydraulic concept known from
previous series of digital actuators.

The PVED-CC Series 5 adds high level feedback, built­in intelligence and effective cabling for ease of
control.

PVED-CC Series 5 creates additional value to the state
of the art Danfoss proportional closed loop spool
position control. Supported by the harmonized CAN
interface, the module can be integrated easily into the
overall machine control system.

Features

•

CAN bus technology for bi-directional
communication

•

Standardized communication through
J1939/ISO bus and CAN open

•

CAN bus wiring/loop cable

•

Integrated diagnostics for easy trouble
shooting/application surveillance

•

Closed loop spool position control

•

Proportional spool position signal

•

Integrated LED

•

Multi-voltage functionality 11-32V

•

PLUS+1® Compliant

•

Built-in intelligence

©

Danfoss | Sept 2016 AI00000314en-US0101 | 1

Closed loop control basis

The Danfoss control concept monitors the actual spool position
continuously. This concept allows the actuator to compensate any
changes by correcting deviations from the setpoint immediately.
The deviations occur due to both internal flow forces and external
disturbances. The module also makes relevant additional
information available for the machine system.

CAN communication means efficient cabling

The PVED-CC Series 5 controls valves with well-known Danfoss
precision and less cabling. One communication cable can facilitate
all the CAN components on the vehicle to ensure high quality
control and feedback. The PVED-CC Series 5 contains the same
analog position control circuit as the analog PVE series plus digital
circuitry to enable flow control using CAN.

Digital control means insight

The digital control of the PVED-CC Series 5 continuously monitors
valve behavior and actuator reliability. The PVED-CC Series 5
closed loop control of the valve is enhanced with flow reporting to
the system. The high level of internal evaluations ensures safe
control of the valve.

Ordering information and part numbers

Description ISObus CANopen

DEUTSCH AMP DEUTSCH AMP

PVED-CC Series 5 11107869 11107870 11172734 11169142
Cable 4000 mm 11007498 157B4994 11007498 157B4994
Loop cable 11007531 157B4987 11007531 157B4987
120 Ω terminator 11007561 157B4988 11007561 157B4988

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | Sept 2016 AI00000314en-US0101