Danfoss PVE-CI Data sheet

Data Sheet

PVE-CI Series 6

A digitally controlled actuator is now available for PVG 16. The PVE-CI Series 6 is based on the hydraulic concept known from the analog versions of the PVEA and PVEO Series 6.

The PVE-CI Series 6 adds high level feedback and effective cabling to the easy controllability and high precision known from the analog PVE Series 6 actuators.

PVE-CI is an innovative actuator with CAN interface providing a cost-effective solution for On/Off functions.

PVEA-CI creates additional value to the state of the art Danfoss proportional closed loop spool position control. Supported by the harmonized CAN interface, the module can be integrated easily into the overall machine control system.

Features

Feature	Values
CAN actuator with focus on core technology	Cost-effective CAN communication

CAN bus technology	Bi-directional communication

J1939/ISO bus and CAN open	Standardized communication

CAN bus wiring/loop cable	Simplified cable harness

Integrated diagnostics	Easy trouble shooting/application surveillance

Electrical On/Off actuation (PVEO-CI)	Cost-effective CAN actuation

Closed loop spool position control	Advanced controllability/3% hysteresis (PVEA-CI)

Proportional spool position signal (PVEA-CI)	Flow feedback

Integrated LED (PVEA-CI)	Visual feedback

Multi-voltage functionality 11-32V (PVEA-CI)	Flexibility in voltage supply

PLUS+1® Compliant	System solution/easy data access

Comprehensive technical literature online at powersolutions.danfoss.com

AI00000258en-US0102 | 1

Danfoss state of the art closed loop spool position control:

Set point

Electronic

Closed loop control

Output

Feedback

		P301 876.A

Closed loop control basis			The Danfoss control concept monitors the actual spool position
			continuesly. This, on one hand, allows the actuator to compensate any
			changes by correcting any deviations compared to the setpoint
			immediately. This includes internal flow forces but also external
			disturbances. On the other hand, the module makes relevant additional
			information available for the overall machine system.
CAN communication means efficient cabling			The PVE-CI controls valves with well-known Danfoss precision and less
			cabling. One communication cable can facilitate all the CAN components
			on the vehicle and ensure high quality control and feedback. The PVEA-CI
			contains the same analog position control circuit as the analog PVEA plus
			digital circuitry to enable flow control using CAN.
Digital control means insight			The digital control of the PVE-CI continuously monitors valve behavior and
			actuator reliability. The PVEA-CI closed loop control of the valve is
			enhanced with flow reporting to the system. The high level of internal
			evaluations ensures safe control of the valve.

Description	ISOBUS			CANopen
PVEO-CI	11124002			11149443

PVEA-CI	11121945			11149437

Loop cable	11095622			11095622

Cable 4000 mm	11095741			11095741

120 Ω terminator	11007561			11007561

Further technical documentation and part numbers

Electrohydraulic Actuator-PVE-CI Series 6: Technical Information	L1505234
PVG 16: Technical Information	L1214235

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.

AI00000258en-US0102