Danfoss PLUS 1 Propel Application Library Data sheet

Data Sheet

PLUS+1

®

Propel Application Library

Mobile Machine Management

The PLUS+1® Propel Application Library (PAL) consists
of GUIDE application software blocks used for engine
power management, intelligent flow sharing and
operating limits.

Product Highlights

Flexible library blocks enable machine specific
differentiation, reduce development effort resulting
in fast time to market. Pre-programmed and tested
libraries support use with platform variants and ease
product life-cycle managment.

User-programmable

Library blocks allow machine specific tailoring, which
is accomplished by using PLUS+1® GUIDE (Graphic
User Integrated Development Environment) tool set.
This environment allows the developer to configure
PLUS+1® hardware, select application options,
integrate the applications with other sub-system
applications, and enhance the application with
additional features.

Features

•

GUIDE drop down menu

©

Danfoss | June 2019 AI00000321en-000102 | 1

•

Engine Power Management Include

Target Speed Command Calculations

‒

Speed Limits

‒

Anti-Stall

‒

•

Intelligent Flow Sharing Include

Demand Calculator

‒

Flow Calculator

‒

Function Priority Hierarchy

‒

Structuring
Output Profiling

‒

Function Scaling

‒

Active Dampening

‒

•

Operation Limits

Longitudinal load moment control/

‒

indication

Comprehensive technical literature is
online at www.danfoss.com

GUIDE Programmable Subsystem Application Service Tool

The PLUS+1® GUIDE Service Tool screens provide the ability to
monitor and tune the operation of devices on the PLUS+1

®

network. Standard features include: bar graph display,
oscilloscope display for trending and tuning, data record, and
export feature. All required user modifiable service screens are
provided with this product.

Scalable PLUS+1® Service Tool Configuration

Specifications

Minimum requirements

PC with PLUS+1® GUIDE, version 8.1 or later
Gateway supported by the PLUS+1® Service Tool

PC with Danfoss PLUS+1® GUIDE. Gateway supported by Service Tool
program. PLUS+1® Compliant module.

Ordering information

Description Part number

Library-Work Function 11179529
Library- Propel Application Library

(Advanced)
Integration-Simulink S Function 11179531
PLUS+1® GUIDE Professional 11179523
PLUS+1® GUIDE Add-ons 11179525
PLUS+1® Service Tool Add-ons 11179527

11182154

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | June 2019 AI00000321en-000102