Danfoss NLX15KK.2 Data sheet

NLX15KK.2

105H

NLX15KK.2

8553-9

DANFOSS COMPRESSORS

Barcode on white background

Yellow background

Red stripe

Approvals

Application

R600a

SUCTION CONNECTOR

6977

serial number

8122

R600a

Yellow warning label

ø16

254

170

166

8649

113

133

24°

55°

51°

60.5

25°

21°

93.5 71

102.5

100

204

178

205

15°

High Energy-optimized Compressor R600a 220-240V 50Hz

General

Code number 105H6977

Approvals EN 60335-2-34 with Annex AA

Compressors on pallet 80

Application

Application LBP

Frequency Hz 50 60

Evaporating temperature °C -35 to -10 –

Voltage range V 198 - 254 –

Max. condensing temperature continuous (short) °C 60 (70) –

Max. winding temperature continuous (short) °C 95 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C S – – – – –

38°C S – – – – –

43°C S – – – – –

Remarks on application:

Motor

Motor type RSCR

LRA (rated after 4 sec. UL984), HST | LST A – 5.6

Cut in Current, HST | LST A – 9.3

Resistance, main | start winding (25°C)

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 150

Free gas volume in compressor cm

Weight without electrical equipment kg 10.7

Dimensions

Height mm A 203

Suction connector location/I.D. mm | angle C 8.2 | 15°

Process connector location/I.D. mm | angle D 6.2 | 25°

Discharge connector location/I.D. mm | angle E 6.2 | 21°

Oil cooler connector location/I.D. mm | angle F –

Connector tolerance I.D. mm ±0.09

Remarks:

August 2007 DEHC.ED.520.R2.02 1/2

LBP MBP HBP LBP MBP HBP

Ω

11.3 21.3

270 (polyolester)

B 197

B2 –

14.65

2360

–

material | comment Cu-plated steel | Al caps

material | comment –

S = Static cooling normally sucient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sucent – = not applicable in this area

EN 12900 Household (CECOMAF) 220V, 50Hz, RC 4µF, ePTC consumption incl., static cooling (standard PTC: +2 watt power consumption, aects COP)

8223

Winding protector

Start winding

Main winding

RSCR

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 110 147 192 209 245 309 384

Power cons. in W 94.7 112 130 136 149 170 192

Current cons. in A 0.45 0.53 0.61 0.64 0.70 0.80 0.90

COP in W/W 1.17 1.32 1.48 1.53 1.64 1.82 1.99

ASHRAE LBP 220V, 50Hz, RC 4µF, ePTC consumption incl., static cooling (standard PTC: +2 watt power consumption, aects COP)

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 135 180 234 255 300 377 468

Power cons. in W 94.7 112 130 136 149 169 191

Current cons. in A 0.45 0.53 0.61 0.64 0.70 0.79 0.89

COP in W/W 1.43 1.61 1.81 1.88 2.01 2.23 2.45

Accessories for NLX15KK.2 Figure Code number Test conditions EN 12900/CECOMAF ASHRAE

PTC starting device 6.3 mm spade connectors

4.8 mm spade connectors 103N0021 Ambient temperature 32°C 32°C

ePTC starting device 4.8 mm spade connectors 103N0050 Suction gas temperature 32°C 32°C

Cover b 103N2010 Liquid temperature no subcooling 32°C

Cord relief d 103N1010

Run capacitor 4 µF (compulsory)

6.3 mm spade connectors

4.8 mm spade connectors 117-7119 Bolt joint for one compressor Ø: 16 mm 118-1917

Protection screen for PTC g 103N0476 Bolt joint in quantities Ø: 16 mm 118-1918

103N0016 Condensing temperature 55°C 54.4°C

117-7117

Mounting accessories Code number

Snap-on in quantities Ø: 16 mm 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 DEHC.ED.520.R2.02 August 2007